Connectors Accessories

Results:

Connector accessories complete specific mechanical, retention, sealing and protection functions within a rectangular connector system. This category includes terminal locks, retainers, wedge locks, seals, gaskets and backshells. Start with the main connector manufacturer, series and housing part number, then match the accessory by function, installed position and specified compatibility.

Start with the Missing Function

Identify what the completed connector assembly needs before searching by accessory appearance. One connector system may require several accessories serving different mechanical or environmental roles.

Required function Typical accessories
Prevent terminal back-out TPA, secondary lock or terminal retainer
Secure the mating pair CPA, wedge lock, latch or locking component
Seal the interface Interface seal, wire seal, gasket or cavity plug
Protect the cable exit Backshell, boot or strain-relief component
Support mounting or routing Bracket, clip, housing retainer or wire guide
Protect an unmated interface Dust cap or protective cover

Use the Main Connector as the Compatibility Key

Manufacturer → Product series → Housing part number → Plug or receptacle side → Accessory part number

Confirm the accessory in the manufacturer’s product drawing, application specification or accessory table. Continue checking positions, housing or shell size, orientation and product revision even when two components share the same series name. If the main connector body has not been selected, begin with Rectangular Connector Housings.

Match the Installed Position

Installation point Compatibility checks
Contact cavity Terminal size, locking lance, TPA orientation and insertion sequence
Mating interface Positions, keying, interface seal and connector side
Wire entry Wire gauge, insulation diameter and individual wire seal
Rear of housing Straight or right-angle exit, backshell size and cable clearance
Panel or enclosure Gasket, bracket, clip, mounting feature and panel thickness
Unused cavity or open face Cavity plug, dust cap and required environmental protection

Terminal locks and retainers must also match the conductive parts installed in the housing. Browse Rectangular Connector Contacts for compatible pins, sockets and crimp terminals.

Build the Complete Sealing System

Environmental protection can depend on several coordinated components: the sealed housing, mating-interface seal, individual wire seals, cavity plugs for unused positions, and any specified backshell or boot. Match each wire seal to the permitted insulation diameter and install every component in the manufacturer’s stated sequence.

A seal or gasket does not establish an IP rating by itself. Apply a sealing or protection rating only when it is specified for the complete connector assembly in its fully mated and correctly installed condition.

Separate the Retention Functions

  • Terminal retention: Holds each contact inside its housing cavity.
  • TPA or secondary lock: Confirms and reinforces terminal seating.
  • CPA: Confirms that the two connector housings are fully mated.
  • Wedge lock: Retains or positions contacts in specified connector families.
  • Panel retainer: Secures the connector housing to its mounting feature.
  • Strain relief: Reduces cable force and bending at the wire termination.

For more detail on housings, terminals, seals, TPA/CPA components and connector assembly records, see the Wiring Harness Connector Types guide.

Complete the Accessory BOM

Record the main housing, mating connector, contacts, seals, locks, backshell or strain-relief parts, mounting hardware and required tooling. Include the quantity of every accessory; one connector may need multiple individual wire seals, cavity plugs and retention components.

If the complete connector type or connection path has not yet been selected, return to Rectangular Connectors before finalizing the accessory list.

Read More
Connectors AccessoriesResults:
Comprehensive
Price Priority
Stock Priority
Image
Part Number
Description
Availability
Unit Price(USD)
Quantity
Operation
5-Pin Cap (Cover), Strain Relief, MTA-156 Series
Available Stock
1,272
Estimated Ship Time:6-13 working days
10+$0.8177
25+$0.7291
5,000+$0.486
10,000+$0.4676
- +
Ext. Price(USD):$14.71
MOQ:18
Mult:1
SPQ:1
Grommet, ePower Series
Available Stock
41
Estimated Ship Time:9-14 working days
10+$2.0887
25+$1.9574
1,000+$1.5085
2,500+$1.4141
- +
Ext. Price(USD):$27.15
MOQ:13
Mult:1
SPQ:1
TE Connectivity
ECAD Model:
TE DT Wedge Locking Device for Connector Terminal Calibration, Press-Fit Assembly
Available Stock
5,197
Estimated Ship Time:6-13 working days
25+$0.3749
100+$0.3553
2,500+$0.2992
5,000+$0.2927
- +
Ext. Price(USD):$14.24
MOQ:38
Mult:1
SPQ:1
Molex
ECAD Model:
Wire Seal 35825 Series Adhesive Mount, Wire Mount 7.3mm L
Available Stock
283,200
Estimated Ship Time:7-9 working days
23+
1,409+$0.0825
3,600+$0.0814
7,100+$0.0803
14,100+$0.0781
140,000+$0.0715
- +
Ext. Price(USD):$116.24
MOQ:1,409
Mult:1
SPQ:1
Hirose Locating Bushing, Bushing
Available Stock
252
Estimated Ship Time:5-10 working days
10+$0.8413
30+$0.8209
50+$0.8056
- +
Ext. Price(USD):$8.41
MOQ:10
Mult:10
Molex
ECAD Model:
Molex Rear Cover, Mega-Fit Series, For 171692 Mega-Fit Socket Housing
Available Stock
181
Estimated Ship Time:9-14 working days
10+$1.2792
25+$0.9958
1,200+$0.7574
2,700+$0.7152
- +
Ext. Price(USD):$26.88
MOQ:27
Mult:1
SPQ:1
ITT Cannon
ECAD Model:
36-Pin Hood and Strain Relief Trident Rectangular Plugs
Available Stock
66
Estimated Ship Time:5-12 working days
5+$11.2672
25+$10.505
500+$6.5484
1,000+$6.5056
- +
Ext. Price(USD):$56.33
MOQ:5
Mult:1
SPQ:100
Bushing 20-Pin LX Series Wire Mount Bushing Mount
Available Stock
2,639
Estimated Ship Time:6-13 working days
10+$0.7728
25+$0.69
100+$0.4862
300+$0.4406
1,000+$0.4363
- +
Ext. Price(USD):$14.68
MOQ:19
Mult:1
SPQ:1
12-Pin Cap (Cover), AMPMODU MT Series
Available Stock
64
Estimated Ship Time:9-14 working days
1+$3.2184
10+$2.7367
1,000+$1.9773
2,500+$1.8536
- +
Ext. Price(USD):$28.96
MOQ:9
Mult:1
SPQ:1
Strain Relief Universal MATE-N-LOK Series, 6/9/12/15 Pin, 32mm L × 32.004mm W
Available Stock
21,792
Estimated Ship Time:6-13 working days
2+$1.495
10+$1.3225
2,500+$0.8154
5,000+$0.7938
- +
Ext. Price(USD):$14.54
MOQ:11
Mult:1
SPQ:1
Molex
ECAD Model:
50-Pin Cable Clamp, CRC Series, Bracket Mount, Wire Mount, 9mm H
Available Stock
1,349
Estimated Ship Time:7-9 working days
13+
77+$0.759
900+$0.726
- +
Ext. Price(USD):$58.44
MOQ:77
Mult:1
SPQ:1
Adam Tech
ECAD Model:
4-Pin Cap (Cover) MTD-A Series
Available Stock
414
Estimated Ship Time:9-14 working days
100+$0.2271
250+$0.2128
- +
Ext. Price(USD):$26.11
MOQ:115
Mult:1
SPQ:1
11-Pin Cap (Cover), Dust MTA-156 Series
Available Stock
696
Estimated Ship Time:6-13 working days
25+$0.4991
100+$0.4301
5,000+$0.2808
10,000+$0.2668
- +
Ext. Price(USD):$14.47
MOQ:29
Mult:1
SPQ:1
Key Rivet Box Series, Rivet Mount
Available Stock
38
Estimated Ship Time:6-13 working days
1+$12.8455
10+$10.9404
100+$9.288
500+$9.072
1,000+$8.3052
- +
Ext. Price(USD):$25.69
MOQ:2
Mult:1
SPQ:1
Adam Tech
ECAD Model:
7-Pin Cap (Cover) MTD-B Series
Available Stock
992
Estimated Ship Time:9-14 working days
50+$0.3218
100+$0.3064
250+$0.2872
500+$0.2734
- +
Ext. Price(USD):$26.06
MOQ:81
Mult:1
SPQ:1
26-Pin Backshell HIF3 Series
Available Stock
37
Estimated Ship Time:5-10 working days
1+$12.3128
5+$11.8284
10+$11.3441
- +
Ext. Price(USD):$12.31
MOQ:1
Mult:1
TE Connectivity Connector Cover, MTA-100 Series, For MTA-100 Series
Available Stock
7,800
Estimated Ship Time:7-10 working days
26+
750+$0.1518
2,000+$0.1342
10,000+$0.1155
25,000+$0.0957
- +
Ext. Price(USD):$113.85
MOQ:750
Mult:1
SPQ:1
Novo Ultra ATA Bus Connector Stress Relief, Ribbon Cable, Glass-Filled Polyester, Locking Tab, 10-64 Pins
Available Stock
14,635
Estimated Ship Time:6-13 working days
10+$0.6521
25+$0.5819
5,000+$0.4104
10,000+$0.4072
- +
Ext. Price(USD):$14.34
MOQ:22
Mult:1
SPQ:1
Molex
ECAD Model:
50-Pin Shroud C-Grid SL Series, Clip Mount, Free Hanging, 19.05mm H
Available Stock
600
Estimated Ship Time:7-10 working days
21+
39+$3.003
100+$2.948
200+$2.904
400+$2.849
600+$2.783
- +
Ext. Price(USD):$117.11
MOQ:39
Mult:1
SPQ:1
Souriau Stress Relief, Strain Relief Boot for SMS Series P1 Standard Plug, SMS Series Quick Connect Connector
Available Stock
180
Estimated Ship Time:5-10 working days
5+$13.6945
50+$13.1362
250+$12.6111
- +
Ext. Price(USD):$68.47
MOQ:5
Mult:5
2-Pin TPA Val-U-Lok Housing, 13.6mm × 5.93mm × 4.35mm
Available Stock
17,377
Estimated Ship Time:6-13 working days
25+$0.2346
100+$0.2036
5,000+$0.1112
9,000+$0.1058
- +
Ext. Price(USD):$14.07
MOQ:60
Mult:1
SPQ:1
6-Pin Cap (Cover), DF1 Series
Available Stock
400
Estimated Ship Time:5-10 working days
100+$0.1569
200+$0.153
400+$0.1507
- +
Ext. Price(USD):$15.69
MOQ:100
Mult:100
Sleeve
Available Stock
12,500
Estimated Ship Time:7-9 working days
23+
75+$1.551
200+$1.529
400+$1.496
750+$1.474
- +
Ext. Price(USD):$116.32
MOQ:75
Mult:1
SPQ:1
Jackscrew Box Series Thread Mount 16.25mm L
Available Stock
71
Estimated Ship Time:5-12 working days
1+$111.6752
5+$105.446
50+$97.1132
100+$96.514
- +
Ext. Price(USD):$111.67
MOQ:1
Mult:1
SPQ:1
Molex
ECAD Model:
5-Pin Terminal Position Assurance (TPA) Ultra-Fit Series
Available Stock
9,772
Estimated Ship Time:6-13 working days
25+$0.1438
100+$0.1323
5,500+$0.0983
11,000+$0.0929
- +
Ext. Price(USD):$14.02
MOQ:106
Mult:1
SPQ:1
25 / PageGoto