Connectors Accessories

Results:

Connector accessories complete specific mechanical, retention, sealing and protection functions within a rectangular connector system. This category includes terminal locks, retainers, wedge locks, seals, gaskets and backshells. Start with the main connector manufacturer, series and housing part number, then match the accessory by function, installed position and specified compatibility.

Start with the Missing Function

Identify what the completed connector assembly needs before searching by accessory appearance. One connector system may require several accessories serving different mechanical or environmental roles.

Required function Typical accessories
Prevent terminal back-out TPA, secondary lock or terminal retainer
Secure the mating pair CPA, wedge lock, latch or locking component
Seal the interface Interface seal, wire seal, gasket or cavity plug
Protect the cable exit Backshell, boot or strain-relief component
Support mounting or routing Bracket, clip, housing retainer or wire guide
Protect an unmated interface Dust cap or protective cover

Use the Main Connector as the Compatibility Key

Manufacturer → Product series → Housing part number → Plug or receptacle side → Accessory part number

Confirm the accessory in the manufacturer’s product drawing, application specification or accessory table. Continue checking positions, housing or shell size, orientation and product revision even when two components share the same series name. If the main connector body has not been selected, begin with Rectangular Connector Housings.

Match the Installed Position

Installation point Compatibility checks
Contact cavity Terminal size, locking lance, TPA orientation and insertion sequence
Mating interface Positions, keying, interface seal and connector side
Wire entry Wire gauge, insulation diameter and individual wire seal
Rear of housing Straight or right-angle exit, backshell size and cable clearance
Panel or enclosure Gasket, bracket, clip, mounting feature and panel thickness
Unused cavity or open face Cavity plug, dust cap and required environmental protection

Terminal locks and retainers must also match the conductive parts installed in the housing. Browse Rectangular Connector Contacts for compatible pins, sockets and crimp terminals.

Build the Complete Sealing System

Environmental protection can depend on several coordinated components: the sealed housing, mating-interface seal, individual wire seals, cavity plugs for unused positions, and any specified backshell or boot. Match each wire seal to the permitted insulation diameter and install every component in the manufacturer’s stated sequence.

A seal or gasket does not establish an IP rating by itself. Apply a sealing or protection rating only when it is specified for the complete connector assembly in its fully mated and correctly installed condition.

Separate the Retention Functions

  • Terminal retention: Holds each contact inside its housing cavity.
  • TPA or secondary lock: Confirms and reinforces terminal seating.
  • CPA: Confirms that the two connector housings are fully mated.
  • Wedge lock: Retains or positions contacts in specified connector families.
  • Panel retainer: Secures the connector housing to its mounting feature.
  • Strain relief: Reduces cable force and bending at the wire termination.

For more detail on housings, terminals, seals, TPA/CPA components and connector assembly records, see the Wiring Harness Connector Types guide.

Complete the Accessory BOM

Record the main housing, mating connector, contacts, seals, locks, backshell or strain-relief parts, mounting hardware and required tooling. Include the quantity of every accessory; one connector may need multiple individual wire seals, cavity plugs and retention components.

If the complete connector type or connection path has not yet been selected, return to Rectangular Connectors before finalizing the accessory list.

Read More
Connectors AccessoriesResults:
Comprehensive
Price Priority
Stock Priority
Image
Part Number
Description
Availability
Unit Price(USD)
Quantity
Operation
3M
ECAD Model:
8-Pin Strain Relief, 451 Series
Available Stock
65
Estimated Ship Time:9-14 working days
10+$2.3728
25+$2.2235
1,000+$1.7136
2,500+$1.6064
- +
Ext. Price(USD):$26.10
MOQ:11
Mult:1
SPQ:1
3-Pin Retainer HVH-280 Series
Available Stock
405
Estimated Ship Time:6-13 working days
10+$0.9108
25+$0.874
2,500+$0.5357
5,000+$0.5238
- +
Ext. Price(USD):$14.57
MOQ:16
Mult:1
SPQ:1
Molex
ECAD Model:
46-Pin Shroud C-Grid SL Series, Bracket Mount, 62.63mm × 19.05mm
Available Stock
50
Estimated Ship Time:9-14 working days
50+$12.6721
100+$12.4186
500+$12.1703
1,000+$11.9269
5,000+$11.6883
- +
Ext. Price(USD):$633.60
MOQ:50
Mult:50
SPQ:1
Molex
ECAD Model:
20-Pin Strain Relief, Milli-Grid, 8mm H
Available Stock
44,513
Estimated Ship Time:7-9 working days
26+
5,000+$0.0737
10,000+$0.0693
- +
Ext. Price(USD):$368.50
MOQ:5,000
Mult:5,000
SPQ:5,000
Backshell, MTC Series
Available Stock
28
Estimated Ship Time:9-14 working days
1+$1,506.546
10+$1,476.4151
50+$1,446.8864
100+$1,417.9486
500+$1,389.5897
- +
Ext. Price(USD):$1,506.54
MOQ:1
Mult:1
SPQ:1
2-Pin Frame
Available Stock
186
Estimated Ship Time:6-13 working days
1+$15.4905
10+$13.5324
288+$9.3744
576+$8.9208
- +
Ext. Price(USD):$15.49
MOQ:1
Mult:1
SPQ:1
Molex
ECAD Model:
Terminal 4-Pin TPA Mini-Fit Jr Series
Available Stock
62,500
Estimated Ship Time:7-9 working days
15+
1,021+$0.1144
2,600+$0.1122
5,200+$0.11
10,300+$0.1089
30,000+$0.0979
- +
Ext. Price(USD):$116.80
MOQ:1,021
Mult:1
SPQ:1
Mini-Box Series Retaining Ring, Panel Mount
Available Stock
1,178
Estimated Ship Time:5-12 working days
5+$4.048
50+$3.465
2,500+$3.0816
5,000+$2.8569
- +
Ext. Price(USD):$32.38
MOQ:8
Mult:1
SPQ:1
HARTING
ECAD Model:
Single Row Receptacle Connector, Har-Modular Series, Right Angle, PCB Mount
Available Stock
46
Estimated Ship Time:5-10 working days
1+$2.1923
10+$2.0904
100+$2.0266
- +
Ext. Price(USD):$6.57
MOQ:3
Mult:1
1-Pin Adapter, SMD Mount, 43.18mm × 15.24mm × 5.08mm
Available Stock
664
Estimated Ship Time:7-9 working days
17+
20+$5.841
50+$5.742
95+$5.643
200+$5.544
- +
Ext. Price(USD):$116.82
MOQ:20
Mult:1
SPQ:1
Molex
ECAD Model:
9-Pin Cable Holder Ribbon Cables Wire Mount
Available Stock
73,000
Estimated Ship Time:7-9 working days
20+
1,191+$0.0495
13,000+$0.0462
27,000+$0.044
68,000+$0.0429
- +
Ext. Price(USD):$58.95
MOQ:1,191
Mult:1
SPQ:1
Amphenol
ECAD Model:
4-Pin Boot, ATM Series
Available Stock
267
Estimated Ship Time:6-13 working days
1+$1.5065
10+$1.288
2,800+$0.7549
5,200+$0.7484
- +
Ext. Price(USD):$14.16
MOQ:11
Mult:1
SPQ:1
5-Pin Terminal Position Assurance (TPA) Val-U-Lok Housings
Available Stock
9,000
Estimated Ship Time:7-9 working days
14+
850+$0.1342
2,100+$0.1309
4,100+$0.1287
8,200+$0.1265
- +
Ext. Price(USD):$114.07
MOQ:850
Mult:1
SPQ:1
1-Pin Plug, Sealing MCP Series, Adhesive Mount
Available Stock
7,927
Estimated Ship Time:5-12 working days
1,000+$0.0457
5,000+$0.0349
150,000+$0.0269
250,000+$0.0268
- +
Ext. Price(USD):$45.70
MOQ:1,000
Mult:1
SPQ:10,000
Amphenol
ECAD Model:
6-Pin Boot, ATM Series
Available Stock
559
Estimated Ship Time:6-13 working days
10+$1.1431
25+$1.0684
2,800+$0.6534
5,200+$0.6469
- +
Ext. Price(USD):$14.86
MOQ:13
Mult:1
SPQ:1
TE Connectivity Automotive Connector Housing, Econoseal III Series 070
Available Stock
260
Estimated Ship Time:5-10 working days
5+$0.3136
1,250+$0.3059
2,500+$0.3008
- +
Ext. Price(USD):$7.84
MOQ:25
Mult:5
10-Pin Shroud AMPMODU MTE Series Panel Mount 7.87mm H
Available Stock
898
Estimated Ship Time:7-9 working days
19+
70+$1.683
200+$1.661
350+$1.628
700+$1.595
- +
Ext. Price(USD):$117.81
MOQ:70
Mult:1
SPQ:1
SMB/Fakra Housing, Male Terminals, SMD
Available Stock
36,980
Estimated Ship Time:7-9 working days
23+
300+$0.418
700+$0.407
1,400+$0.396
8,000+$0.352
- +
Ext. Price(USD):$125.40
MOQ:300
Mult:1
SPQ:1
Bulgin
ECAD Model:
Bulgin Automotive Connector Hinge Lock, Wedge Lock, WLP12 Series, 2-Pos
Available Stock
8,840
Estimated Ship Time:5-10 working days
50+$0.4255
100+$0.4015
250+$0.3809
500+$0.3597
- +
Ext. Price(USD):$21.27
MOQ:50
Mult:50
10-Pin Cap (Cover) Micro Quadlok Series
Available Stock
2,224
Estimated Ship Time:9-14 working days
25+$0.813
50+$0.7744
1,000+$0.6266
2,500+$0.5874
- +
Ext. Price(USD):$26.01
MOQ:32
Mult:1
SPQ:1
Nylon PCB Connector Covers: 2.54mm Strain Relief, MTA 100
Available Stock
3,163
Estimated Ship Time:6-13 working days
10+$0.8349
25+$0.7452
100+$0.6787
250+$0.6242
500+$0.4709
- +
Ext. Price(USD):$14.19
MOQ:17
Mult:1
SPQ:1
TE Connectivity Stress Relief, Metrimate Series, For Metrimate Square Plug and Socket
Available Stock
46
Estimated Ship Time:5-10 working days
1+$10.2862
25+$10.095
100+$9.8018
250+$9.4704
500+$9.3174
- +
Ext. Price(USD):$10.28
MOQ:1
Mult:1
13-Pin Cap (Cover), Strain Relief, MTA-156 Series
Available Stock
7,175
Estimated Ship Time:5-12 working days
250+$0.4461
1,000+$0.4244
15,000+$0.271
25,000+$0.2703
- +
Ext. Price(USD):$111.52
MOQ:250
Mult:250
SPQ:250
Plug, Sealing, Junior Power Timer Series, Seal Mount
Available Stock
39,218
Estimated Ship Time:6-13 working days
25+$0.1461
100+$0.1185
5,000+$0.0842
10,000+$0.0821
- +
Ext. Price(USD):$14.10
MOQ:119
Mult:1
SPQ:1
NOVO AMP Latch, Ribbon Cable Connector Component, Glass Filled Nylon, 10-64 Pin Options
Available Stock
2,500
Estimated Ship Time:6-13 working days
25+$0.3933
100+$0.3542
5,000+$0.2506
10,000+$0.2419
- +
Ext. Price(USD):$14.15
MOQ:36
Mult:1
SPQ:1
25 / PageGoto