Connectors Accessories

Results:

Connector accessories complete specific mechanical, retention, sealing and protection functions within a rectangular connector system. This category includes terminal locks, retainers, wedge locks, seals, gaskets and backshells. Start with the main connector manufacturer, series and housing part number, then match the accessory by function, installed position and specified compatibility.

Start with the Missing Function

Identify what the completed connector assembly needs before searching by accessory appearance. One connector system may require several accessories serving different mechanical or environmental roles.

Required function Typical accessories
Prevent terminal back-out TPA, secondary lock or terminal retainer
Secure the mating pair CPA, wedge lock, latch or locking component
Seal the interface Interface seal, wire seal, gasket or cavity plug
Protect the cable exit Backshell, boot or strain-relief component
Support mounting or routing Bracket, clip, housing retainer or wire guide
Protect an unmated interface Dust cap or protective cover

Use the Main Connector as the Compatibility Key

Manufacturer → Product series → Housing part number → Plug or receptacle side → Accessory part number

Confirm the accessory in the manufacturer’s product drawing, application specification or accessory table. Continue checking positions, housing or shell size, orientation and product revision even when two components share the same series name. If the main connector body has not been selected, begin with Rectangular Connector Housings.

Match the Installed Position

Installation point Compatibility checks
Contact cavity Terminal size, locking lance, TPA orientation and insertion sequence
Mating interface Positions, keying, interface seal and connector side
Wire entry Wire gauge, insulation diameter and individual wire seal
Rear of housing Straight or right-angle exit, backshell size and cable clearance
Panel or enclosure Gasket, bracket, clip, mounting feature and panel thickness
Unused cavity or open face Cavity plug, dust cap and required environmental protection

Terminal locks and retainers must also match the conductive parts installed in the housing. Browse Rectangular Connector Contacts for compatible pins, sockets and crimp terminals.

Build the Complete Sealing System

Environmental protection can depend on several coordinated components: the sealed housing, mating-interface seal, individual wire seals, cavity plugs for unused positions, and any specified backshell or boot. Match each wire seal to the permitted insulation diameter and install every component in the manufacturer’s stated sequence.

A seal or gasket does not establish an IP rating by itself. Apply a sealing or protection rating only when it is specified for the complete connector assembly in its fully mated and correctly installed condition.

Separate the Retention Functions

  • Terminal retention: Holds each contact inside its housing cavity.
  • TPA or secondary lock: Confirms and reinforces terminal seating.
  • CPA: Confirms that the two connector housings are fully mated.
  • Wedge lock: Retains or positions contacts in specified connector families.
  • Panel retainer: Secures the connector housing to its mounting feature.
  • Strain relief: Reduces cable force and bending at the wire termination.

For more detail on housings, terminals, seals, TPA/CPA components and connector assembly records, see the Wiring Harness Connector Types guide.

Complete the Accessory BOM

Record the main housing, mating connector, contacts, seals, locks, backshell or strain-relief parts, mounting hardware and required tooling. Include the quantity of every accessory; one connector may need multiple individual wire seals, cavity plugs and retention components.

If the complete connector type or connection path has not yet been selected, return to Rectangular Connectors before finalizing the accessory list.

Read More
Connectors AccessoriesResults:
Comprehensive
Price Priority
Stock Priority
Image
Part Number
Description
Availability
Unit Price(USD)
Quantity
Operation
JST
ECAD Model:
Tab Cover Housing
Available Stock
1,673
Estimated Ship Time:9-14 working days
25+$0.6748
50+$0.6424
1,200+$0.5132
2,800+$0.4834
- +
Ext. Price(USD):$26.31
MOQ:39
Mult:1
SPQ:1
Molex
ECAD Model:
8-Pin Terminal Position Assurance (TPA) 201644, 201647 Series
Available Stock
4,400
Estimated Ship Time:7-9 working days
22+
1,011+$0.1155
2,600+$0.1144
20,000+$0.0946
50,000+$0.0924
- +
Ext. Price(USD):$116.77
MOQ:1,011
Mult:1
SPQ:1
3M
ECAD Model:
Ejector Latch, Long, 810 Series
Available Stock
332
Estimated Ship Time:6-13 working days
1+$3.059
10+$2.6795
2,600+$1.5228
5,000+$1.5012
- +
Ext. Price(USD):$15.29
MOQ:5
Mult:1
SPQ:1
Molex
ECAD Model:
4-Pin Wedgelock ML-XT 93445 Housings
Available Stock
2,762
Estimated Ship Time:7-9 working days
18+
350+$0.1672
4,000+$0.1595
- +
Ext. Price(USD):$58.52
MOQ:350
Mult:1
SPQ:1
Molex
ECAD Model:
12-Pin Wedgelock ML-XT 93445 Housings, 31.6mm L × 18mm H
Available Stock
12,036
Estimated Ship Time:7-9 working days
19+
243+$0.2398
3,000+$0.2299
6,000+$0.22
- +
Ext. Price(USD):$58.27
MOQ:243
Mult:1
SPQ:1
TE Connectivity DTM Tail Cap, High Protection, Allows Corrugated Tube Insertion, 180° & 90° Versions
Available Stock
759
Estimated Ship Time:6-13 working days
1+$3.266
10+$2.838
2,500+$1.7172
5,000+$1.62
- +
Ext. Price(USD):$16.33
MOQ:5
Mult:1
SPQ:1
3M
ECAD Model:
3M Pull Tab, 3490 Series
Available Stock
3,018
Estimated Ship Time:6-13 working days
1+$1.8975
10+$1.7135
2,000+$1.0454
5,000+$1.026
- +
Ext. Price(USD):$15.18
MOQ:8
Mult:1
SPQ:1
Molex
ECAD Model:
4-Pin Connector, Terminal Position Assurance (TPA), Mini-Fit Series
Available Stock
8,770
Estimated Ship Time:9-14 working days
50+$0.3372
100+$0.321
1,000+$0.2727
2,500+$0.2557
- +
Ext. Price(USD):$26.30
MOQ:78
Mult:1
SPQ:1
HARTING
ECAD Model:
Connector Lock, Coding Pin T, with Nut, for PCB Connector
Available Stock
105
Estimated Ship Time:5-10 working days
1+$2.3835
10+$2.3326
100+$2.2688
- +
Ext. Price(USD):$7.15
MOQ:3
Mult:1
Ejector Latch, AMP-LATCH Series, 22.098mm L
Available Stock
6,470
Estimated Ship Time:7-9 working days
15+
600+$0.1991
1,400+$0.1958
2,800+$0.1925
5,600+$0.1892
- +
Ext. Price(USD):$119.46
MOQ:600
Mult:1
SPQ:1
Cap (Cover) Dust MTA-156 Series 17-Pin
Available Stock
2,465
Estimated Ship Time:6-13 working days
25+$0.3899
100+$0.33
5,000+$0.2074
10,000+$0.1944
- +
Ext. Price(USD):$14.03
MOQ:36
Mult:1
SPQ:1
28-Pin Insert Electronic Control Module Sealed Connectors (ECMSC) Series, Adhesive Mount
Available Stock
750
Estimated Ship Time:7-9 working days
24+
98+$1.133
304+$1.078
- +
Ext. Price(USD):$111.03
MOQ:98
Mult:1
SPQ:1
Molex
ECAD Model:
1-Pin Retainer, 204601 Series, Fixed Mount
Available Stock
4,290
Estimated Ship Time:9-14 working days
10+$2.497
25+$2.3406
1,000+$1.804
2,500+$1.6912
- +
Ext. Price(USD):$27.46
MOQ:11
Mult:1
SPQ:1
4-Pin TPA Grace Inertia Connectors Wire Mount 9.5mm L × 7.2mm H
Available Stock
276,000
Estimated Ship Time:7-9 working days
20+
3,000+$0.0517
6,000+$0.0506
12,000+$0.0473
25,000+$0.0462
50,000+$0.0429
- +
Ext. Price(USD):$155.10
MOQ:3,000
Mult:1
SPQ:1
Non-Insulated Wire Ferrules
Available Stock
123,943
Estimated Ship Time:9-14 working days
250+$0.0748
500+$0.0712
1,000+$0.0678
2,500+$0.0635
- +
Ext. Price(USD):$26.03
MOQ:348
Mult:1
SPQ:1
HARTING
ECAD Model:
1-Pin Polarizing Device (Key, Plug, Post) SEK Series Female Connector DIN Rail Mount
Available Stock
31
Estimated Ship Time:9-14 working days
1+$3.1644
10+$2.6914
1,000+$1.9444
2,500+$1.8227
- +
Ext. Price(USD):$28.47
MOQ:9
Mult:1
SPQ:1
Molex
ECAD Model:
8-Pin Gasket, MX150L Series, Flange Mount, 58.42mm × 30.48mm × 30.48mm
Available Stock
343
Estimated Ship Time:7-9 working days
21+
213+$0.55
550+$0.539
960+$0.517
2,000+$0.44
5,000+$0.429
- +
Ext. Price(USD):$117.15
MOQ:213
Mult:1
SPQ:1
6-Pin Cap (Cover), AMPMODU MT Series
Available Stock
1,625
Estimated Ship Time:5-12 working days
30+$1.058
50+$1.0086
1,000+$0.7672
2,500+$0.7212
- +
Ext. Price(USD):$31.74
MOQ:30
Mult:1
SPQ:1
32-Pin Cap (Cover), AMPMODU Mod IV Series
Available Stock
5,090
Estimated Ship Time:7-9 working days
19+
90+$1.276
250+$1.254
2,500+$1.1
5,000+$1.001
- +
Ext. Price(USD):$114.84
MOQ:90
Mult:1
SPQ:1
Backshell, MTC Series
Available Stock
29
Estimated Ship Time:9-14 working days
1+$5,614.3044
10+$5,502.0179
100+$5,391.9777
500+$5,284.1381
1,000+$5,178.4554
- +
Ext. Price(USD):$5,614.30
MOQ:1
Mult:1
SPQ:1
Amphenol
ECAD Model:
4-Pin Boot, ATM Series
Available Stock
294
Estimated Ship Time:6-13 working days
10+$1.0224
25+$0.9683
2,800+$0.5659
5,200+$0.5605
- +
Ext. Price(USD):$14.31
MOQ:14
Mult:1
SPQ:1
HARTING
ECAD Model:
Assembly Frame, Assembly Aid for PCB Connector
Available Stock
42
Estimated Ship Time:5-10 working days
1+$5.2897
10+$5.1367
100+$5.022
- +
Ext. Price(USD):$10.57
MOQ:2
Mult:1
Adam Tech
ECAD Model:
4-Pin Cap (Cover) MTD-A Series
Available Stock
579
Estimated Ship Time:9-14 working days
100+$0.2505
250+$0.2347
500+$0.2235
- +
Ext. Price(USD):$26.05
MOQ:104
Mult:1
SPQ:1
HARTING
ECAD Model:
Single Row Receptacle Connector, Har-Modular Series, Right Angle, PCB Mount
Available Stock
109
Estimated Ship Time:5-10 working days
1+$1.2619
10+$1.2491
100+$1.1981
- +
Ext. Price(USD):$7.57
MOQ:6
Mult:1
Mounting Base, DMC-M Series
Available Stock
28
Estimated Ship Time:9-14 working days
5+$460.4904
10+$451.2812
50+$442.2557
100+$433.4105
500+$424.7423
- +
Ext. Price(USD):$2,302.45
MOQ:5
Mult:5
SPQ:1
25 / PageGoto