Connectors Accessories

Results:

Connector accessories complete specific mechanical, retention, sealing and protection functions within a rectangular connector system. This category includes terminal locks, retainers, wedge locks, seals, gaskets and backshells. Start with the main connector manufacturer, series and housing part number, then match the accessory by function, installed position and specified compatibility.

Start with the Missing Function

Identify what the completed connector assembly needs before searching by accessory appearance. One connector system may require several accessories serving different mechanical or environmental roles.

Required function Typical accessories
Prevent terminal back-out TPA, secondary lock or terminal retainer
Secure the mating pair CPA, wedge lock, latch or locking component
Seal the interface Interface seal, wire seal, gasket or cavity plug
Protect the cable exit Backshell, boot or strain-relief component
Support mounting or routing Bracket, clip, housing retainer or wire guide
Protect an unmated interface Dust cap or protective cover

Use the Main Connector as the Compatibility Key

Manufacturer → Product series → Housing part number → Plug or receptacle side → Accessory part number

Confirm the accessory in the manufacturer’s product drawing, application specification or accessory table. Continue checking positions, housing or shell size, orientation and product revision even when two components share the same series name. If the main connector body has not been selected, begin with Rectangular Connector Housings.

Match the Installed Position

Installation point Compatibility checks
Contact cavity Terminal size, locking lance, TPA orientation and insertion sequence
Mating interface Positions, keying, interface seal and connector side
Wire entry Wire gauge, insulation diameter and individual wire seal
Rear of housing Straight or right-angle exit, backshell size and cable clearance
Panel or enclosure Gasket, bracket, clip, mounting feature and panel thickness
Unused cavity or open face Cavity plug, dust cap and required environmental protection

Terminal locks and retainers must also match the conductive parts installed in the housing. Browse Rectangular Connector Contacts for compatible pins, sockets and crimp terminals.

Build the Complete Sealing System

Environmental protection can depend on several coordinated components: the sealed housing, mating-interface seal, individual wire seals, cavity plugs for unused positions, and any specified backshell or boot. Match each wire seal to the permitted insulation diameter and install every component in the manufacturer’s stated sequence.

A seal or gasket does not establish an IP rating by itself. Apply a sealing or protection rating only when it is specified for the complete connector assembly in its fully mated and correctly installed condition.

Separate the Retention Functions

  • Terminal retention: Holds each contact inside its housing cavity.
  • TPA or secondary lock: Confirms and reinforces terminal seating.
  • CPA: Confirms that the two connector housings are fully mated.
  • Wedge lock: Retains or positions contacts in specified connector families.
  • Panel retainer: Secures the connector housing to its mounting feature.
  • Strain relief: Reduces cable force and bending at the wire termination.

For more detail on housings, terminals, seals, TPA/CPA components and connector assembly records, see the Wiring Harness Connector Types guide.

Complete the Accessory BOM

Record the main housing, mating connector, contacts, seals, locks, backshell or strain-relief parts, mounting hardware and required tooling. Include the quantity of every accessory; one connector may need multiple individual wire seals, cavity plugs and retention components.

If the complete connector type or connection path has not yet been selected, return to Rectangular Connectors before finalizing the accessory list.

Read More
Connectors AccessoriesResults:
Comprehensive
Price Priority
Stock Priority
Image
Part Number
Description
Availability
Unit Price(USD)
Quantity
Operation
3M
ECAD Model:
8-Pin Strain Relief, 891 Series
Available Stock
1,000
Estimated Ship Time:9-14 working days
50+$0.5089
100+$0.4845
250+$0.4541
500+$0.4324
1,000+$0.4118
- +
Ext. Price(USD):$26.46
MOQ:52
Mult:1
SPQ:1
Polarizing Device (Key, Plug, Post), AMPMODU Mod IV Series
Available Stock
4,709
Estimated Ship Time:6-13 working days
25+$0.475
100+$0.4323
5,000+$0.31
10,000+$0.2948
- +
Ext. Price(USD):$14.25
MOQ:30
Mult:1
SPQ:1
Mounting Base, DMC-MD Inserts, Bracket Mount, TH
Available Stock
29
Estimated Ship Time:9-14 working days
10+$209.1452
100+$204.9621
200+$200.8628
500+$196.8456
1,000+$192.9087
- +
Ext. Price(USD):$2,091.45
MOQ:10
Mult:10
SPQ:1
2-Pin Ferrule, Outer HVA 280 Series
Available Stock
5,700
Estimated Ship Time:7-10 working days
22+
85+$1.298
250+$1.276
450+$1.254
850+$1.221
- +
Ext. Price(USD):$110.33
MOQ:85
Mult:1
SPQ:1
Molex
ECAD Model:
28-Pin C-Grid SL Series Wire Mount, 27.56mm H
Available Stock
18,035
Estimated Ship Time:7-9 working days
22+
56+$2.112
150+$2.068
4,000+$1.661
8,000+$1.562
- +
Ext. Price(USD):$118.27
MOQ:56
Mult:1
SPQ:1
Amphenol
ECAD Model:
Bootloader 8-Pin ATM Series
Available Stock
833
Estimated Ship Time:5-12 working days
25+$0.7752
400+$0.6837
7,600+$0.4877
10,000+$0.4833
- +
Ext. Price(USD):$30.23
MOQ:39
Mult:1
SPQ:400
3M
ECAD Model:
26-Pin Strain Relief 3000 Series
Available Stock
998
Estimated Ship Time:6-13 working days
1+$5.474
10+$4.763
1,000+$2.7756
2,000+$2.7324
- +
Ext. Price(USD):$16.42
MOQ:3
Mult:1
SPQ:1
Amphenol
ECAD Model:
4-Pin Wedge for Pins, ATP Series™
Available Stock
323
Estimated Ship Time:6-13 working days
25+$0.4911
100+$0.4653
5,225+$0.3067
10,175+$0.3002
- +
Ext. Price(USD):$14.24
MOQ:29
Mult:1
SPQ:1
Strain Relief, 30-Pin
Available Stock
2,524
Estimated Ship Time:9-14 working days
288+$0.0674
504+$0.0648
1,008+$0.0617
2,520+$0.0579
- +
Ext. Price(USD):$26.01
MOQ:386
Mult:1
SPQ:1
Guide Pin Box Series
Available Stock
10
Estimated Ship Time:5-12 working days
5+$11.063
25+$10.054
500+$9.0201
1,000+$7.7575
- +
Ext. Price(USD):$55.31
MOQ:5
Mult:1
Bulgin
ECAD Model:
Bulgin Automotive Connector Hinge Lock, Wedge Lock, WLP12 Series, 12-Way
Available Stock
975
Estimated Ship Time:5-10 working days
25+$0.4247
100+$0.4165
250+$0.4089
500+$0.4002
- +
Ext. Price(USD):$10.61
MOQ:25
Mult:25
Connector Accessories Plug Rectangular Dust Cap
Available Stock
90
Estimated Ship Time:7-9 working days
22+
5+$23.012
16+$19.36
500+$14.135
1,000+$13.596
- +
Ext. Price(USD):$115.06
MOQ:5
Mult:1
SPQ:1
Polarizing Device (Key, Plug, Post) Omnimate RSV Series
Available Stock
34
Estimated Ship Time:9-14 working days
25+$0.9858
50+$0.9387
1,000+$0.7597
2,500+$0.7122
- +
Ext. Price(USD):$26.61
MOQ:27
Mult:1
SPQ:1
JAE
ECAD Model:
50-Pin Shell, FI-JW Series
Available Stock
1,998
Estimated Ship Time:9-14 working days
10+$2.3965
25+$2.246
500+$1.8178
1,000+$1.7311
- +
Ext. Price(USD):$26.36
MOQ:11
Mult:1
SPQ:1
Retainer Clip AMP Automotive Connectors Fixed Mount 19.2mm H
Available Stock
1,724
Estimated Ship Time:6-13 working days
1+$3.427
10+$3.014
1,000+$1.9548
3,000+$1.944
- +
Ext. Price(USD):$17.13
MOQ:5
Mult:1
SPQ:1
Amphenol
ECAD Model:
Boot, 3pin, AT Series™
Available Stock
121
Estimated Ship Time:6-13 working days
1+$1.6905
10+$1.4835
2,700+$0.8564
5,100+$0.8532
- +
Ext. Price(USD):$15.21
MOQ:9
Mult:1
SPQ:1
Amphenol
ECAD Model:
16-Pin Strain Relief, Quickie™ Series
Available Stock
11,490
Estimated Ship Time:6-13 working days
25+$0.2864
100+$0.2829
5,382+$0.2538
10,350+$0.2495
- +
Ext. Price(USD):$14.03
MOQ:49
Mult:1
SPQ:1
Molex
ECAD Model:
2pin Gasket MX150L Series Flange Mount 43.18mm × 25.4mm × 25.4mm
Available Stock
556
Estimated Ship Time:7-9 working days
11+
304+$0.385
800+$0.374
936+$0.352
2,000+$0.308
5,000+$0.3025
- +
Ext. Price(USD):$117.04
MOQ:304
Mult:1
SPQ:1
Amphenol
ECAD Model:
Connector Accessory, Clamp, Aluminum, Black Anodized
Available Stock
32
Estimated Ship Time:6-13 working days
1+$33.209
10+$29.5488
25+$26.7084
- +
Ext. Price(USD):$33.20
MOQ:1
Mult:1
SPQ:1
Adam Tech
ECAD Model:
6-Pin Cap (Cover) MTD-A Series
Available Stock
1,547
Estimated Ship Time:9-14 working days
50+$0.3013
100+$0.287
1,000+$0.2439
3,000+$0.2257
- +
Ext. Price(USD):$26.21
MOQ:87
Mult:1
SPQ:1
Seal Protector, Adhesive Mount
Available Stock
129,784
Estimated Ship Time:7-9 working days
20+
10,000+$0.0191
20,000+$0.0187
30,000+$0.0184
50,000+$0.0177
- +
Ext. Price(USD):$191.00
MOQ:10,000
Mult:1
SPQ:1
Backshell, MTC Series
Available Stock
28
Estimated Ship Time:9-14 working days
1+$1,071.6948
10+$1,050.259
50+$1,029.2538
100+$1,008.6687
500+$988.4954
- +
Ext. Price(USD):$1,071.69
MOQ:1
Mult:1
SPQ:1
TE Connectivity Connector Housing, 5-Pos, 2.54mm Pitch, 1 Row
Available Stock
5,125
Estimated Ship Time:6-13 working days
1+$4.1285
10+$3.377
1,000+$2.4516
2,500+$2.3004
- +
Ext. Price(USD):$16.51
MOQ:4
Mult:1
SPQ:1
Molex
ECAD Model:
8-Pin Cable Holder, Ribbon Cables, Wire Mount, 3.8mm H
Available Stock
216,920
Estimated Ship Time:7-9 working days
19+
3,000+$0.0224
15,000+$0.0207
31,000+$0.0191
- +
Ext. Price(USD):$67.20
MOQ:3,000
Mult:1
SPQ:1
Dust Cover Cap MTC Series 55.3mm L × 9.8mm H
Available Stock
284
Estimated Ship Time:7-9 working days
16+
35+$3.212
90+$3.146
200+$3.091
- +
Ext. Price(USD):$112.42
MOQ:35
Mult:1
SPQ:1
25 / PageGoto