Connectors Accessories

Results:

Connector accessories complete specific mechanical, retention, sealing and protection functions within a rectangular connector system. This category includes terminal locks, retainers, wedge locks, seals, gaskets and backshells. Start with the main connector manufacturer, series and housing part number, then match the accessory by function, installed position and specified compatibility.

Start with the Missing Function

Identify what the completed connector assembly needs before searching by accessory appearance. One connector system may require several accessories serving different mechanical or environmental roles.

Required function Typical accessories
Prevent terminal back-out TPA, secondary lock or terminal retainer
Secure the mating pair CPA, wedge lock, latch or locking component
Seal the interface Interface seal, wire seal, gasket or cavity plug
Protect the cable exit Backshell, boot or strain-relief component
Support mounting or routing Bracket, clip, housing retainer or wire guide
Protect an unmated interface Dust cap or protective cover

Use the Main Connector as the Compatibility Key

Manufacturer → Product series → Housing part number → Plug or receptacle side → Accessory part number

Confirm the accessory in the manufacturer’s product drawing, application specification or accessory table. Continue checking positions, housing or shell size, orientation and product revision even when two components share the same series name. If the main connector body has not been selected, begin with Rectangular Connector Housings.

Match the Installed Position

Installation point Compatibility checks
Contact cavity Terminal size, locking lance, TPA orientation and insertion sequence
Mating interface Positions, keying, interface seal and connector side
Wire entry Wire gauge, insulation diameter and individual wire seal
Rear of housing Straight or right-angle exit, backshell size and cable clearance
Panel or enclosure Gasket, bracket, clip, mounting feature and panel thickness
Unused cavity or open face Cavity plug, dust cap and required environmental protection

Terminal locks and retainers must also match the conductive parts installed in the housing. Browse Rectangular Connector Contacts for compatible pins, sockets and crimp terminals.

Build the Complete Sealing System

Environmental protection can depend on several coordinated components: the sealed housing, mating-interface seal, individual wire seals, cavity plugs for unused positions, and any specified backshell or boot. Match each wire seal to the permitted insulation diameter and install every component in the manufacturer’s stated sequence.

A seal or gasket does not establish an IP rating by itself. Apply a sealing or protection rating only when it is specified for the complete connector assembly in its fully mated and correctly installed condition.

Separate the Retention Functions

  • Terminal retention: Holds each contact inside its housing cavity.
  • TPA or secondary lock: Confirms and reinforces terminal seating.
  • CPA: Confirms that the two connector housings are fully mated.
  • Wedge lock: Retains or positions contacts in specified connector families.
  • Panel retainer: Secures the connector housing to its mounting feature.
  • Strain relief: Reduces cable force and bending at the wire termination.

For more detail on housings, terminals, seals, TPA/CPA components and connector assembly records, see the Wiring Harness Connector Types guide.

Complete the Accessory BOM

Record the main housing, mating connector, contacts, seals, locks, backshell or strain-relief parts, mounting hardware and required tooling. Include the quantity of every accessory; one connector may need multiple individual wire seals, cavity plugs and retention components.

If the complete connector type or connection path has not yet been selected, return to Rectangular Connectors before finalizing the accessory list.

Read More
Connectors AccessoriesResults:
Comprehensive
Price Priority
Stock Priority
Image
Part Number
Description
Availability
Unit Price(USD)
Quantity
Operation
60-Pin Cap (Cover), Sealing
Available Stock
1,732
Estimated Ship Time:6-13 working days
1+$2.714
10+$2.3115
2,700+$1.4472
5,100+$1.3932
- +
Ext. Price(USD):$16.28
MOQ:6
Mult:1
SPQ:1
TE Connectivity Connector Plug, MTA-156 Series
Available Stock
13,034
Estimated Ship Time:6-13 working days
25+$0.1461
100+$0.1415
5,200+$0.1058
10,000+$0.1048
- +
Ext. Price(USD):$14.02
MOQ:96
Mult:1
SPQ:1
TE DT Tail Cover High Protection, Allows Corrugated Tube Nesting, 180°, 90°, Stress Relief Versions
Available Stock
3,108
Estimated Ship Time:6-13 working days
1+$3.6685
10+$3.333
1,000+$1.7064
5,000+$1.4688
- +
Ext. Price(USD):$14.67
MOQ:4
Mult:1
SPQ:1
Molex
ECAD Model:
2-Pin Wedgelock ML-XT 93444 Housing, 10.4mm L × 13.05mm H
Available Stock
17,487
Estimated Ship Time:7-10 working days
25+
1,316+$0.044
14,000+$0.0429
- +
Ext. Price(USD):$57.90
MOQ:1,316
Mult:1
SPQ:1
2-Pin Strain Relief, SMS Series
Available Stock
1,345
Estimated Ship Time:6-13 working days
1+$1.7595
100+$1.6416
- +
Ext. Price(USD):$14.07
MOQ:8
Mult:1
SPQ:1
3M
ECAD Model:
30-Pin Strain Relief, 451 Series
Available Stock
26
Estimated Ship Time:6-13 working days
1+$2.5185
10+$2.277
2,500+$1.35
5,000+$1.3176
- +
Ext. Price(USD):$15.11
MOQ:6
Mult:1
SPQ:1
Coding Key DMC-MD Inserts
Available Stock
729
Estimated Ship Time:7-9 working days
22+
20+$6.325
45+$6.215
90+$6.116
200+$6.006
- +
Ext. Price(USD):$126.50
MOQ:20
Mult:1
SPQ:1
Amphenol
ECAD Model:
2pin Wedge for Sockets ATP Series™
Available Stock
719
Estimated Ship Time:6-13 working days
25+$0.4186
100+$0.3817
5,600+$0.256
10,400+$0.2495
- +
Ext. Price(USD):$14.23
MOQ:34
Mult:1
SPQ:1
Bulgin
ECAD Model:
Bulgin Automotive Connector Hinge Lock, Wedge Lock, WLP12 Series, 3-Pos
Available Stock
5,448
Estimated Ship Time:5-10 working days
25+$0.416
100+$0.3921
250+$0.3844
500+$0.3819
- +
Ext. Price(USD):$10.40
MOQ:25
Mult:25
Molex
ECAD Model:
Molex Connector Plug, 19431 Series, Polycarbonate (PBT), Natural Color
Available Stock
406
Estimated Ship Time:7-9 working days
26+
384+$0.3047
720+$0.2827
1,600+$0.2475
4,000+$0.242
- +
Ext. Price(USD):$117.00
MOQ:384
Mult:1
SPQ:1
6-Pin Terminal Position Assurance (TPA)
Available Stock
2,500
Estimated Ship Time:7-9 working days
16+
450+$0.2563
1,100+$0.2519
2,200+$0.2475
- +
Ext. Price(USD):$115.33
MOQ:450
Mult:1
SPQ:1
Mounting Base, DMC-MD Inserts
Available Stock
495
Estimated Ship Time:6-13 working days
1+$44.858
10+$39.1176
100+$34.2576
250+$33.3072
- +
Ext. Price(USD):$44.85
MOQ:1
Mult:1
SPQ:1
1-Pin Lock Plate, Board Mount
Available Stock
9,000
Estimated Ship Time:7-9 working days
13+
750+$0.154
5,000+$0.1474
9,000+$0.1419
- +
Ext. Price(USD):$115.50
MOQ:750
Mult:1
SPQ:1
Strain Relief for Ribbon Cable Connector, Glass Filled Polyester, Std & Heavy Duty, 6-50 Pins
Available Stock
357
Estimated Ship Time:6-13 working days
1+$2.5185
10+$2.3575
250+$1.8036
500+$1.6848
- +
Ext. Price(USD):$15.11
MOQ:6
Mult:1
SPQ:1
4-Pin Insulator GT32 Series PCB Mount 6.6mm × 4.35mm × 4.7mm
Available Stock
498
Estimated Ship Time:6-13 working days
10+$0.8476
25+$0.7567
2,500+$0.5195
5,000+$0.5076
- +
Ext. Price(USD):$14.40
MOQ:17
Mult:1
SPQ:1
2-Pin Retainer, Fixed Mount
Available Stock
8,796
Estimated Ship Time:7-9 working days
15+
1,100+$0.1012
2,800+$0.099
5,500+$0.0979
- +
Ext. Price(USD):$111.32
MOQ:1,100
Mult:1
SPQ:1
Amphenol
ECAD Model:
2-Pin Boot, ATM Series
Available Stock
340
Estimated Ship Time:6-13 working days
10+$0.9051
25+$0.8085
2,800+$0.5119
5,200+$0.5065
- +
Ext. Price(USD):$14.48
MOQ:16
Mult:1
SPQ:1
3M
ECAD Model:
Polarizing Device (Key, Plug, Post), 3000 Series
Available Stock
1,192
Estimated Ship Time:9-14 working days
25+$0.5111
80+$0.4709
1,040+$0.3928
2,560+$0.3686
- +
Ext. Price(USD):$26.06
MOQ:51
Mult:1
SPQ:1
Rear Housing MTC Series
Available Stock
28
Estimated Ship Time:9-14 working days
1+$1,678.9572
10+$1,645.3735
50+$1,612.4657
100+$1,580.2164
500+$1,548.612
- +
Ext. Price(USD):$1,678.95
MOQ:1
Mult:1
SPQ:1
Polarizing Device (Key, Plug, Post) Utilux CR Series, Wire Mount
Available Stock
369
Estimated Ship Time:5-12 working days
10+$3.243
50+$2.959
1,000+$2.6322
2,500+$2.5573
- +
Ext. Price(USD):$32.43
MOQ:10
Mult:1
SPQ:1
5-Pin Insulator AMPMODU Headers, Bushing Mount, 12.31mm L
Available Stock
280
Estimated Ship Time:6-13 working days
1+$3.4385
10+$3.113
2,500+$2.9808
- +
Ext. Price(USD):$17.19
MOQ:5
Mult:1
SPQ:1
Key Rivet Box Series, Rivet Mount
Available Stock
935
Estimated Ship Time:5-12 working days
5+$21.9072
25+$21.461
375+$7.7361
500+$7.5863
- +
Ext. Price(USD):$109.53
MOQ:5
Mult:1
SPQ:100
Anderson Power
ECAD Model:
Handle, EBC Series
Available Stock
72
Estimated Ship Time:6-13 working days
1+$7.7395
10+$6.699
1,000+$4.266
2,000+$4.0284
- +
Ext. Price(USD):$15.47
MOQ:2
Mult:1
SPQ:1
15-Pin Cap (Cover), Dust MTA-156 Series
Available Stock
1,634
Estimated Ship Time:6-13 working days
25+$0.3531
100+$0.2981
5,000+$0.1868
10,000+$0.1782
- +
Ext. Price(USD):$14.12
MOQ:40
Mult:1
SPQ:1
Connector Shroud, 50-Pin, AMPMODU MTE Series
Available Stock
43
Estimated Ship Time:7-9 working days
15+
34+$3.322
- +
Ext. Price(USD):$112.94
MOQ:34
Mult:1
SPQ:1
25 / PageGoto