Connectors Accessories

Results:

Connector accessories complete specific mechanical, retention, sealing and protection functions within a rectangular connector system. This category includes terminal locks, retainers, wedge locks, seals, gaskets and backshells. Start with the main connector manufacturer, series and housing part number, then match the accessory by function, installed position and specified compatibility.

Start with the Missing Function

Identify what the completed connector assembly needs before searching by accessory appearance. One connector system may require several accessories serving different mechanical or environmental roles.

Required function Typical accessories
Prevent terminal back-out TPA, secondary lock or terminal retainer
Secure the mating pair CPA, wedge lock, latch or locking component
Seal the interface Interface seal, wire seal, gasket or cavity plug
Protect the cable exit Backshell, boot or strain-relief component
Support mounting or routing Bracket, clip, housing retainer or wire guide
Protect an unmated interface Dust cap or protective cover

Use the Main Connector as the Compatibility Key

Manufacturer → Product series → Housing part number → Plug or receptacle side → Accessory part number

Confirm the accessory in the manufacturer’s product drawing, application specification or accessory table. Continue checking positions, housing or shell size, orientation and product revision even when two components share the same series name. If the main connector body has not been selected, begin with Rectangular Connector Housings.

Match the Installed Position

Installation point Compatibility checks
Contact cavity Terminal size, locking lance, TPA orientation and insertion sequence
Mating interface Positions, keying, interface seal and connector side
Wire entry Wire gauge, insulation diameter and individual wire seal
Rear of housing Straight or right-angle exit, backshell size and cable clearance
Panel or enclosure Gasket, bracket, clip, mounting feature and panel thickness
Unused cavity or open face Cavity plug, dust cap and required environmental protection

Terminal locks and retainers must also match the conductive parts installed in the housing. Browse Rectangular Connector Contacts for compatible pins, sockets and crimp terminals.

Build the Complete Sealing System

Environmental protection can depend on several coordinated components: the sealed housing, mating-interface seal, individual wire seals, cavity plugs for unused positions, and any specified backshell or boot. Match each wire seal to the permitted insulation diameter and install every component in the manufacturer’s stated sequence.

A seal or gasket does not establish an IP rating by itself. Apply a sealing or protection rating only when it is specified for the complete connector assembly in its fully mated and correctly installed condition.

Separate the Retention Functions

  • Terminal retention: Holds each contact inside its housing cavity.
  • TPA or secondary lock: Confirms and reinforces terminal seating.
  • CPA: Confirms that the two connector housings are fully mated.
  • Wedge lock: Retains or positions contacts in specified connector families.
  • Panel retainer: Secures the connector housing to its mounting feature.
  • Strain relief: Reduces cable force and bending at the wire termination.

For more detail on housings, terminals, seals, TPA/CPA components and connector assembly records, see the Wiring Harness Connector Types guide.

Complete the Accessory BOM

Record the main housing, mating connector, contacts, seals, locks, backshell or strain-relief parts, mounting hardware and required tooling. Include the quantity of every accessory; one connector may need multiple individual wire seals, cavity plugs and retention components.

If the complete connector type or connection path has not yet been selected, return to Rectangular Connectors before finalizing the accessory list.

Read More
Connectors AccessoriesResults:
Comprehensive
Price Priority
Stock Priority
Image
Part Number
Description
Availability
Unit Price(USD)
Quantity
Operation
TE DT Wedge Locking Device for Connector Terminal Calibration, Press-Fit Assembly
Available Stock
3,638
Estimated Ship Time:6-13 working days
25+$0.3876
100+$0.3553
5,000+$0.3046
10,000+$0.2873
- +
Ext. Price(USD):$14.34
MOQ:37
Mult:1
SPQ:1
Molex
ECAD Model:
Molex Retainer, Terminal Position Guarantee, 105415 Series, For Large Pitch Wire-to-Board 5.70mm
Available Stock
101,719
Estimated Ship Time:6-13 working days
25+$0.1403
100+$0.1334
4,600+$0.1037
11,500+$0.0788
- +
Ext. Price(USD):$14.00
MOQ:105
Mult:1
SPQ:1
Plug, Sealing EconoSeal Series J Adhesive Mount
Available Stock
27,000
Estimated Ship Time:5-12 working days
1,000+$0.2473
5,000+$0.2201
60,000+$0.2048
80,000+$0.2028
- +
Ext. Price(USD):$247.30
MOQ:1,000
Mult:1,000
SPQ:1,000
Available Stock
191
Estimated Ship Time:6-13 working days
1+$1.656
10+$1.4145
2,600+$0.8964
5,000+$0.8824
- +
Ext. Price(USD):$14.90
MOQ:9
Mult:1
SPQ:1
Available Stock
136
Estimated Ship Time:5-12 working days
5+$18.5248
10+$18.15
75+$12.3264
100+$12.0803
- +
Ext. Price(USD):$92.62
MOQ:5
Mult:1
SPQ:1
Molex
ECAD Model:
15-Pin Cable Holder, Ribbon Cables, Wire Mount
Available Stock
28,000
Estimated Ship Time:7-9 working days
20+
2,000+$0.0506
7,000+$0.0462
14,000+$0.0429
- +
Ext. Price(USD):$101.20
MOQ:2,000
Mult:1
SPQ:1
Shell 20-Pin
Available Stock
68
Estimated Ship Time:5-12 working days
1+$353.87
4+$337.4887
7+$334.1503
11+$330.844
14+$327.5591
- +
Ext. Price(USD):$353.87
MOQ:1
Mult:1
SPQ:1
3-Pin Dust Cap, MTA-156 Series
Available Stock
1,768
Estimated Ship Time:6-13 working days
100+$0.115
250+$0.0989
1,000+$0.0891
2,000+$0.068
10,000+$0.0637
- +
Ext. Price(USD):$14.03
MOQ:122
Mult:1
SPQ:1
Molex
ECAD Model:
22-Pin Shroud C-Grid SL Series Wire Mount 72.23mm L × 8.12mm H
Available Stock
50
Estimated Ship Time:9-14 working days
50+$10.8
100+$10.584
500+$10.3723
1,000+$10.1649
5,000+$9.9616
- +
Ext. Price(USD):$540.00
MOQ:50
Mult:50
SPQ:1
Nylon PCB Connector Covers: 2.54mm Strain Relief, MTA 100
Available Stock
5,562
Estimated Ship Time:7-9 working days
18+
450+$0.2706
1,300+$0.2662
2,000+$0.2508
2,500+$0.2332
5,000+$0.2222
- +
Ext. Price(USD):$121.77
MOQ:450
Mult:1
SPQ:1
Mounting Base, DMC-MD Inserts
Available Stock
28
Estimated Ship Time:9-14 working days
5+$268.4858
10+$263.115
50+$257.853
100+$252.6959
500+$247.642
- +
Ext. Price(USD):$1,342.42
MOQ:5
Mult:5
SPQ:1
Bulgin
ECAD Model:
Bulgin Automotive Connector Hinge Lock Wedge Lock, WLP12 Series, 8-Pos
Available Stock
1,925
Estimated Ship Time:5-10 working days
25+$0.4375
100+$0.4293
250+$0.4201
500+$0.412
- +
Ext. Price(USD):$10.93
MOQ:25
Mult:25
TE Connectivity
ECAD Model:
TE DT Wedge Locking Device for Connector Terminal Calibration, Press-Fit Assembly
Available Stock
16,079
Estimated Ship Time:6-13 working days
25+$0.4278
100+$0.3817
5,000+$0.3024
10,000+$0.2959
- +
Ext. Price(USD):$14.11
MOQ:33
Mult:1
SPQ:1
NAIL HEAD PIN
Available Stock
3,704
Estimated Ship Time:9-14 working days
50+$0.4506
100+$0.429
1,000+$0.3646
2,500+$0.3418
- +
Ext. Price(USD):$26.13
MOQ:58
Mult:1
SPQ:1
TE Connectivity Automotive Connector Backshell, AMPSEAL 16 Series, 3 Contacts
Available Stock
8,239
Estimated Ship Time:7-9 working days
20+
45+$2.541
150+$2.442
600+$2.343
2,000+$2.266
5,000+$2.167
- +
Ext. Price(USD):$114.34
MOQ:45
Mult:1
SPQ:1
3M
ECAD Model:
64-Pin Strain Relief 4600 Series Panel Mount 90.2mm L
Available Stock
820
Estimated Ship Time:9-14 working days
1+$7.0956
10+$6.0253
1,000+$4.3538
2,500+$4.0816
- +
Ext. Price(USD):$28.38
MOQ:4
Mult:1
SPQ:1
Gasket, 6-Pin, Universal MATE-N-LOK Series
Available Stock
5,000
Estimated Ship Time:7-10 working days
26+
1,000+$0.693
3,000+$0.693
5,000+$0.616
250,000+$0.473
- +
Ext. Price(USD):$693.00
MOQ:1,000
Mult:1,000
SPQ:1,000
Molex
ECAD Model:
7-Pin Terminal Position Assurance (TPA) Ultra-Fit Series
Available Stock
40,000
Estimated Ship Time:7-9 working days
22+
900+$0.066
1,250+$0.0616
2,500+$0.0594
5,000+$0.0539
10,000+$0.0517
- +
Ext. Price(USD):$59.40
MOQ:900
Mult:1
SPQ:1
7-Pin Terminal Position Assurance (TPA) Val-U-Lok Housings
Available Stock
4,416
Estimated Ship Time:6-13 working days
25+$0.1472
100+$0.1403
5,000+$0.0983
8,000+$0.0918
- +
Ext. Price(USD):$14.13
MOQ:96
Mult:1
SPQ:1
10-Pin Cap (Cover), Dust MTA-156 Series
Available Stock
1,000
Estimated Ship Time:7-9 working days
19+
1,000+$0.11
25,000+$0.0968
50,000+$0.0858
- +
Ext. Price(USD):$110.00
MOQ:1,000
Mult:1
SPQ:1
Mounting Base, DMC-MD Inserts, Bracket Mount, TH
Available Stock
28
Estimated Ship Time:9-14 working days
5+$268.4858
10+$263.115
50+$257.853
100+$252.6959
500+$247.642
- +
Ext. Price(USD):$1,342.42
MOQ:5
Mult:5
SPQ:1
Harwin
ECAD Model:
Backshell 22-Pin Datamate J-Tek, Datamate Mix-Tek
Available Stock
3
Estimated Ship Time:9-14 working days
1+$145.2276
10+$123.4505
25+$115.7285
50+$110.2121
100+$104.9603
- +
Ext. Price(USD):$145.22
MOQ:1
Mult:1
SPQ:1
Amphenol
ECAD Model:
4-Pin Wedgelock AT Series 18.2mm L × 13.9mm H
Available Stock
927
Estimated Ship Time:6-13 working days
25+$0.2841
100+$0.2703
250+$0.2134
900+$0.1728
2,700+$0.1706
- +
Ext. Price(USD):$14.20
MOQ:50
Mult:1
SPQ:1
Backshell, MTC Series
Available Stock
28
Estimated Ship Time:9-14 working days
2+$752.9868
10+$737.924
50+$723.1658
100+$708.7026
500+$694.5286
- +
Ext. Price(USD):$1,505.97
MOQ:2
Mult:2
SPQ:1
ITT Cannon
ECAD Model:
12-Pin Hood and Strain Relief Trident Rectangular Plugs
Available Stock
262
Estimated Ship Time:5-12 working days
5+$7.3255
25+$6.27
1,000+$3.9055
2,500+$3.3384
- +
Ext. Price(USD):$36.62
MOQ:5
Mult:1
SPQ:100
25 / PageGoto