Connectors Accessories

Results:

Connector accessories complete specific mechanical, retention, sealing and protection functions within a rectangular connector system. This category includes terminal locks, retainers, wedge locks, seals, gaskets and backshells. Start with the main connector manufacturer, series and housing part number, then match the accessory by function, installed position and specified compatibility.

Start with the Missing Function

Identify what the completed connector assembly needs before searching by accessory appearance. One connector system may require several accessories serving different mechanical or environmental roles.

Required function Typical accessories
Prevent terminal back-out TPA, secondary lock or terminal retainer
Secure the mating pair CPA, wedge lock, latch or locking component
Seal the interface Interface seal, wire seal, gasket or cavity plug
Protect the cable exit Backshell, boot or strain-relief component
Support mounting or routing Bracket, clip, housing retainer or wire guide
Protect an unmated interface Dust cap or protective cover

Use the Main Connector as the Compatibility Key

Manufacturer → Product series → Housing part number → Plug or receptacle side → Accessory part number

Confirm the accessory in the manufacturer’s product drawing, application specification or accessory table. Continue checking positions, housing or shell size, orientation and product revision even when two components share the same series name. If the main connector body has not been selected, begin with Rectangular Connector Housings.

Match the Installed Position

Installation point Compatibility checks
Contact cavity Terminal size, locking lance, TPA orientation and insertion sequence
Mating interface Positions, keying, interface seal and connector side
Wire entry Wire gauge, insulation diameter and individual wire seal
Rear of housing Straight or right-angle exit, backshell size and cable clearance
Panel or enclosure Gasket, bracket, clip, mounting feature and panel thickness
Unused cavity or open face Cavity plug, dust cap and required environmental protection

Terminal locks and retainers must also match the conductive parts installed in the housing. Browse Rectangular Connector Contacts for compatible pins, sockets and crimp terminals.

Build the Complete Sealing System

Environmental protection can depend on several coordinated components: the sealed housing, mating-interface seal, individual wire seals, cavity plugs for unused positions, and any specified backshell or boot. Match each wire seal to the permitted insulation diameter and install every component in the manufacturer’s stated sequence.

A seal or gasket does not establish an IP rating by itself. Apply a sealing or protection rating only when it is specified for the complete connector assembly in its fully mated and correctly installed condition.

Separate the Retention Functions

  • Terminal retention: Holds each contact inside its housing cavity.
  • TPA or secondary lock: Confirms and reinforces terminal seating.
  • CPA: Confirms that the two connector housings are fully mated.
  • Wedge lock: Retains or positions contacts in specified connector families.
  • Panel retainer: Secures the connector housing to its mounting feature.
  • Strain relief: Reduces cable force and bending at the wire termination.

For more detail on housings, terminals, seals, TPA/CPA components and connector assembly records, see the Wiring Harness Connector Types guide.

Complete the Accessory BOM

Record the main housing, mating connector, contacts, seals, locks, backshell or strain-relief parts, mounting hardware and required tooling. Include the quantity of every accessory; one connector may need multiple individual wire seals, cavity plugs and retention components.

If the complete connector type or connection path has not yet been selected, return to Rectangular Connectors before finalizing the accessory list.

Read More
Connectors AccessoriesResults:
Comprehensive
Price Priority
Stock Priority
Image
Part Number
Description
Availability
Unit Price(USD)
Quantity
Operation
2-Pin Strain Relief Universal MATE-N-LOK II Series Panel Mount
Available Stock
2,725
Estimated Ship Time:7-9 working days
26+
80+$1.375
250+$1.21
25,000+$1.012
100,000+$0.957
- +
Ext. Price(USD):$110.00
MOQ:80
Mult:1
SPQ:1
Available Stock
240
Estimated Ship Time:5-12 working days
10+$3.9905
50+$3.509
5,000+$2.2898
7,500+$2.2791
- +
Ext. Price(USD):$39.90
MOQ:10
Mult:1
SPQ:250
40-Pin Strain Relief 812 Series
Available Stock
913
Estimated Ship Time:7-9 working days
13+
295+$0.374
- +
Ext. Price(USD):$110.33
MOQ:295
Mult:1
SPQ:1
Polarizing Device (Key, Plug, Post), MTC Series, Bracket Mount
Available Stock
169
Estimated Ship Time:6-13 working days
1+$30.426
10+$25.4016
25+$23.814
50+$22.68
100+$18.9432
- +
Ext. Price(USD):$30.42
MOQ:1
Mult:1
SPQ:1
Amphenol
ECAD Model:
3-Pin Shroud Mini-PV™ Series 11.3mm L
Available Stock
550
Estimated Ship Time:5-12 working days
50+$0.6369
250+$0.5818
8,000+$0.5086
15,000+$0.4982
- +
Ext. Price(USD):$31.84
MOQ:50
Mult:1
SPQ:1,000
3pin Cap (Cover), Strain Relief, 9176 Series
Available Stock
1,179
Estimated Ship Time:9-14 working days
1+$1.1421
10+$0.9675
1,000+$0.5852
3,000+$0.5416
- +
Ext. Price(USD):$150.11
MOQ:218
Mult:1
SPQ:1
12-Pin Cap (Cover), Micro Quadlok Series
Available Stock
822
Estimated Ship Time:7-9 working days
10+
95+$1.188
250+$1.166
500+$1.144
- +
Ext. Price(USD):$112.86
MOQ:95
Mult:1
SPQ:1
Molex
ECAD Model:
Multicat Housing Rear Shell 4-Pin
Available Stock
3,000
Estimated Ship Time:7-9 working days
25+
52+$2.255
150+$2.211
4,000+$1.914
10,000+$1.793
- +
Ext. Price(USD):$117.26
MOQ:52
Mult:1
SPQ:1
Molex
ECAD Model:
50-Pin Shell CRC Series Panel Mount 60.4mm L × 19.6mm H
Available Stock
1,413
Estimated Ship Time:7-9 working days
20+
7+$17.083
18+$16.786
240+$14.729
800+$12.892
- +
Ext. Price(USD):$119.58
MOQ:7
Mult:1
SPQ:1
TE Connectivity Stress Relief Clamp, Strain Relief for AMPLATCH
Available Stock
999
Estimated Ship Time:6-13 working days
1+$10.0165
10+$8.14
500+$6.0048
1,000+$5.508
- +
Ext. Price(USD):$20.03
MOQ:2
Mult:1
SPQ:1
CR ZIF Connector System
Available Stock
63
Estimated Ship Time:9-14 working days
1+$33.6744
10+$28.6222
100+$24.3319
250+$22.8103
- +
Ext. Price(USD):$33.67
MOQ:1
Mult:1
SPQ:1
15-Pin Cap (Cover), Dust MTA-156 Series
Available Stock
462
Estimated Ship Time:9-14 working days
25+$0.6091
50+$0.58
1,000+$0.4693
2,500+$0.4399
- +
Ext. Price(USD):$26.19
MOQ:43
Mult:1
SPQ:1
Jackscrew Mini-Box Series, Thread Mount
Available Stock
242
Estimated Ship Time:7-9 working days
18+
6+$20.02
14+$19.646
28+$19.272
55+$18.909
- +
Ext. Price(USD):$120.12
MOQ:6
Mult:1
SPQ:1
Harwin
ECAD Model:
Backshell Gecko Series 20-Pin Free Hanging
Available Stock
59
Estimated Ship Time:9-14 working days
1+$124.1676
10+$105.5516
25+$98.9487
50+$94.2317
100+$89.7411
- +
Ext. Price(USD):$124.16
MOQ:1
Mult:1
SPQ:1
Molex
ECAD Model:
Molex TPA Retainer for Micro-One Receptacle Housing
Available Stock
13,718
Estimated Ship Time:7-9 working days
21+
1,563+$0.0748
4,000+$0.0737
8,000+$0.0726
- +
Ext. Price(USD):$116.91
MOQ:1,563
Mult:1
SPQ:1
Bulgin
ECAD Model:
Bulgin Automotive Connector Hinge Lock, Wedge Lock, WLP12 Series, 4-Way
Available Stock
457
Estimated Ship Time:6-12 working days
10+$0.7244
100+$0.3333
2,500+$0.2897
5,000+$0.2833
- +
Ext. Price(USD):$28.97
MOQ:40
Mult:10
Harwin
ECAD Model:
HARWIN Connector Housing, 10 Pos, 2mm Pitch, 2 Rows
Available Stock
339
Estimated Ship Time:9-14 working days
1+$5.238
10+$4.4474
1,000+$3.2133
2,500+$3.0124
- +
Ext. Price(USD):$26.19
MOQ:5
Mult:1
SPQ:1
Molex
ECAD Model:
7-Pin Terminal Position Assurance (TPA) 150201 Series Housings
Available Stock
1,500
Estimated Ship Time:7-9 working days
18+
450+$0.1364
- +
Ext. Price(USD):$61.38
MOQ:450
Mult:1
SPQ:1
9-Pin Lock Plate MIC (Multi-Interlock) Series Board Mount
Available Stock
2,450
Estimated Ship Time:7-9 working days
20+
250+$0.506
1,000+$0.473
2,000+$0.451
- +
Ext. Price(USD):$126.50
MOQ:250
Mult:1
SPQ:1
Ribbon Cable Connector Assembly, Pull Ring for Receptacle, Ultra ATA Bus, 2mm Socket & Novo Connector, PVC, UL 94-VTM-1
Available Stock
11,336
Estimated Ship Time:7-9 working days
22+
500+$0.2651
1,500+$0.2596
2,500+$0.2453
5,000+$0.2255
10,000+$0.22
- +
Ext. Price(USD):$132.55
MOQ:500
Mult:250
SPQ:250
2-Pin Cap (Cover) SQUIB Series Wire Mount
Available Stock
879,500
Estimated Ship Time:7-9 working days
13+
1,000+$0.1144
3,000+$0.1122
5,000+$0.11
10,000+$0.1078
16,000+$0.1056
- +
Ext. Price(USD):$114.40
MOQ:1,000
Mult:1
SPQ:1
Harwin
ECAD Model:
26-Pin Shell Gecko Series Panel Mount
Available Stock
5
Estimated Ship Time:7-9 working days
10+
3+$47.96
- +
Ext. Price(USD):$143.88
MOQ:3
Mult:1
SPQ:1
3M
ECAD Model:
10-Pin Strain Relief, D89 Series
Available Stock
626
Estimated Ship Time:6-13 working days
10+$0.613
25+$0.5474
1,000+$0.4244
3,000+$0.3672
- +
Ext. Price(USD):$14.23
MOQ:26
Mult:1
SPQ:1
Molex
ECAD Model:
Cage Assembly, 1x2 Ganged 62202-9884 TH
Available Stock
133
Estimated Ship Time:7-9 working days
23+
10+$9.713
35+$9.526
65+$9.35
- +
Ext. Price(USD):$97.13
MOQ:10
Mult:1
SPQ:1
Mounting Base DMC-MD Inserts, Bracket Mount, Panel Mount
Available Stock
28
Estimated Ship Time:9-14 working days
2+$897.426
10+$879.4796
50+$861.8897
100+$844.6518
500+$827.7588
- +
Ext. Price(USD):$1,794.85
MOQ:2
Mult:2
SPQ:1
25 / PageGoto