Connectors Accessories

Results:

Connector accessories complete specific mechanical, retention, sealing and protection functions within a rectangular connector system. This category includes terminal locks, retainers, wedge locks, seals, gaskets and backshells. Start with the main connector manufacturer, series and housing part number, then match the accessory by function, installed position and specified compatibility.

Start with the Missing Function

Identify what the completed connector assembly needs before searching by accessory appearance. One connector system may require several accessories serving different mechanical or environmental roles.

Required function Typical accessories
Prevent terminal back-out TPA, secondary lock or terminal retainer
Secure the mating pair CPA, wedge lock, latch or locking component
Seal the interface Interface seal, wire seal, gasket or cavity plug
Protect the cable exit Backshell, boot or strain-relief component
Support mounting or routing Bracket, clip, housing retainer or wire guide
Protect an unmated interface Dust cap or protective cover

Use the Main Connector as the Compatibility Key

Manufacturer → Product series → Housing part number → Plug or receptacle side → Accessory part number

Confirm the accessory in the manufacturer’s product drawing, application specification or accessory table. Continue checking positions, housing or shell size, orientation and product revision even when two components share the same series name. If the main connector body has not been selected, begin with Rectangular Connector Housings.

Match the Installed Position

Installation point Compatibility checks
Contact cavity Terminal size, locking lance, TPA orientation and insertion sequence
Mating interface Positions, keying, interface seal and connector side
Wire entry Wire gauge, insulation diameter and individual wire seal
Rear of housing Straight or right-angle exit, backshell size and cable clearance
Panel or enclosure Gasket, bracket, clip, mounting feature and panel thickness
Unused cavity or open face Cavity plug, dust cap and required environmental protection

Terminal locks and retainers must also match the conductive parts installed in the housing. Browse Rectangular Connector Contacts for compatible pins, sockets and crimp terminals.

Build the Complete Sealing System

Environmental protection can depend on several coordinated components: the sealed housing, mating-interface seal, individual wire seals, cavity plugs for unused positions, and any specified backshell or boot. Match each wire seal to the permitted insulation diameter and install every component in the manufacturer’s stated sequence.

A seal or gasket does not establish an IP rating by itself. Apply a sealing or protection rating only when it is specified for the complete connector assembly in its fully mated and correctly installed condition.

Separate the Retention Functions

  • Terminal retention: Holds each contact inside its housing cavity.
  • TPA or secondary lock: Confirms and reinforces terminal seating.
  • CPA: Confirms that the two connector housings are fully mated.
  • Wedge lock: Retains or positions contacts in specified connector families.
  • Panel retainer: Secures the connector housing to its mounting feature.
  • Strain relief: Reduces cable force and bending at the wire termination.

For more detail on housings, terminals, seals, TPA/CPA components and connector assembly records, see the Wiring Harness Connector Types guide.

Complete the Accessory BOM

Record the main housing, mating connector, contacts, seals, locks, backshell or strain-relief parts, mounting hardware and required tooling. Include the quantity of every accessory; one connector may need multiple individual wire seals, cavity plugs and retention components.

If the complete connector type or connection path has not yet been selected, return to Rectangular Connectors before finalizing the accessory list.

Read More
Connectors AccessoriesResults:
Comprehensive
Price Priority
Stock Priority
Image
Part Number
Description
Availability
Unit Price(USD)
Quantity
Operation
Molex
ECAD Model:
26-Pin Clip Mini Mi II 54596 Series Clamp Mount
Available Stock
11,039
Estimated Ship Time:7-9 working days
16+
747+$0.0781
8,000+$0.0748
- +
Ext. Price(USD):$58.34
MOQ:747
Mult:1
SPQ:1
Mounting Bracket DMC-MD Inserts, Adhesive Mount, Panel Mount
Available Stock
60
Estimated Ship Time:7-9 working days
20+
4+$35.618
8+$34.958
16+$34.298
31+$33.638
50+$32.978
- +
Ext. Price(USD):$142.47
MOQ:4
Mult:1
SPQ:1
Amphenol
ECAD Model:
3-Pin Gasket, ePower Series
Available Stock
25
Estimated Ship Time:9-14 working days
1+$4.968
10+$4.2174
1,000+$3.0469
2,500+$2.8563
- +
Ext. Price(USD):$29.80
MOQ:6
Mult:1
SPQ:1
Ribbon Cable Connector Assembly, Pull Ring for Receptacle, Ultra ATA Bus, 2mm Socket & Novo Connector, PVC, UL 94-VTM-1
Available Stock
4,878
Estimated Ship Time:6-13 working days
10+$0.9603
25+$0.8579
2,500+$0.5832
5,000+$0.553
- +
Ext. Price(USD):$14.40
MOQ:15
Mult:1
SPQ:1
Amphenol
ECAD Model:
16-Pin Strain Relief Quickie™ Series 14.224mm L × 4.75mm W
Available Stock
572
Estimated Ship Time:7-9 working days
14+
421+$0.2618
4,140+$0.2618
8,280+$0.2321
- +
Ext. Price(USD):$110.21
MOQ:421
Mult:1
SPQ:1
5-Pin Retainer iBridge Ultra Female Connector
Available Stock
3,446
Estimated Ship Time:7-9 working days
20+
600+$0.198
1,500+$0.1947
1,600+$0.1826
- +
Ext. Price(USD):$118.80
MOQ:600
Mult:1
SPQ:1
3M
ECAD Model:
3M Stress Relief, Strain Relief Clamp, For 891 Series
Available Stock
1,826
Estimated Ship Time:5-12 working days
100+$0.3196
500+$0.2921
15,000+$0.2559
25,000+$0.2517
- +
Ext. Price(USD):$31.96
MOQ:100
Mult:1
SPQ:1,000
Harwin
ECAD Model:
Polarizing Device (Key, Plug, Post) M22 Series
Available Stock
3,062
Estimated Ship Time:9-14 working days
50+$0.3927
100+$0.3739
1,000+$0.3177
3,000+$0.294
- +
Ext. Price(USD):$26.31
MOQ:67
Mult:1
SPQ:1
Backshell, MTC Series
Available Stock
5
Estimated Ship Time:7-9 working days
11+
1+$1,031.635
2+$1,013.221
- +
Ext. Price(USD):$1,031.63
MOQ:1
Mult:1
SPQ:1
Universal I/O Pin Connector Stress Relief, Ribbon Cable Assembly, Glass-Filled Polyester, Lock Hook, 10-64 Pins
Available Stock
1,418
Estimated Ship Time:5-12 working days
5+$4.1055
50+$3.52
2,500+$3.1244
5,000+$2.8569
- +
Ext. Price(USD):$32.84
MOQ:8
Mult:1
SPQ:1
Pancon
ECAD Model:
8-Pin Connector
Available Stock
7,304
Estimated Ship Time:5-12 working days
100+$0.6955
500+$0.3377
5,000+$0.1502
10,000+$0.1297
- +
Ext. Price(USD):$69.55
MOQ:100
Mult:100
SPQ:100
15-Pin Terminal Position Assurance (TPA)
Available Stock
2,348
Estimated Ship Time:6-13 working days
10+$0.9074
25+$0.8096
2,500+$0.5443
5,000+$0.5368
- +
Ext. Price(USD):$14.51
MOQ:16
Mult:1
SPQ:1
Deutsch Heat Shrink Sleeve, Receptacle, Plastic, For 1 Cable
Available Stock
6,045
Estimated Ship Time:6-13 working days
1+$4.094
10+$2.838
500+$2.0196
1,000+$2.0088
- +
Ext. Price(USD):$16.37
MOQ:4
Mult:1
SPQ:1
9-Pin Terminal Position Assurance (TPA) Val-U-Lok Housings
Available Stock
2,483
Estimated Ship Time:6-13 working days
100+$0.1116
1,000+$0.0924
2,500+$0.0821
5,000+$0.0778
10,000+$0.067
- +
Ext. Price(USD):$14.06
MOQ:126
Mult:1
SPQ:1
8-Pin Bracket Sumicon 1600 Series Connector Bracket Mount 27mm L × 15.5mm H
Available Stock
403
Estimated Ship Time:6-13 working days
1+$1.8515
10+$1.6215
2,500+$0.9742
5,000+$0.9277
- +
Ext. Price(USD):$14.81
MOQ:8
Mult:1
SPQ:1
6pin Backshell AMPSEAL Connectors
Available Stock
53
Estimated Ship Time:9-14 working days
50+$22.7865
100+$22.3307
200+$21.8841
500+$21.4464
1,000+$21.0175
- +
Ext. Price(USD):$1,139.32
MOQ:50
Mult:50
SPQ:1
TE Connectivity Sealing Cover, Universal MATE-N-LOK Series
Available Stock
20,000
Estimated Ship Time:7-9 working days
24+
200+$0.583
500+$0.572
950+$0.561
1,900+$0.55
10,000+$0.495
- +
Ext. Price(USD):$116.60
MOQ:200
Mult:1
SPQ:1
16-Pin Backshell AMPSEAL Connector
Available Stock
103
Estimated Ship Time:9-14 working days
100+$10.692
200+$10.4782
500+$10.2686
1,000+$10.0632
5,000+$9.862
- +
Ext. Price(USD):$1,069.20
MOQ:100
Mult:100
SPQ:1
Molex
ECAD Model:
11pin Cable Holder Ribbon Cables Wire Mount 3.8mm H
Available Stock
20,000
Estimated Ship Time:7-9 working days
20+
2,000+$0.0352
10,000+$0.0319
20,000+$0.0297
- +
Ext. Price(USD):$70.40
MOQ:2,000
Mult:1
SPQ:1
40-Pin Strain Relief, AMP-LATCH Series
Available Stock
1,371
Estimated Ship Time:7-9 working days
10+
100+$1.111
250+$1.089
500+$1.078
1,000+$1.056
- +
Ext. Price(USD):$111.10
MOQ:100
Mult:50
SPQ:50
Polyester PCB Connector Covers: 2.54mm Strain Relief, Dust Protection, MTA 100
Available Stock
300
Estimated Ship Time:6-13 working days
10+$0.5474
25+$0.5003
5,000+$0.2786
10,000+$0.2603
- +
Ext. Price(USD):$14.00
MOQ:28
Mult:1
SPQ:1
21-Pin Lock Plate, MIC Series, Board Mount
Available Stock
4,012
Estimated Ship Time:5-12 working days
500+$0.2948
100,000+$0.2542
648,000+$0.2443
972,000+$0.2419
- +
Ext. Price(USD):$147.40
MOQ:500
Mult:500
SPQ:500
Connector Accessories, Grommet, Straight
Available Stock
11,637
Estimated Ship Time:7-9 working days
18+
1,900+$0.0605
4,600+$0.0594
9,100+$0.0583
10,000+$0.0561
- +
Ext. Price(USD):$114.95
MOQ:1,900
Mult:1
SPQ:1
Backshell DMC-MD Inserts
Available Stock
543
Estimated Ship Time:5-12 working days
1+$62.3616
5+$59.642
100+$41.9975
250+$41.0131
- +
Ext. Price(USD):$62.36
MOQ:1
Mult:1
SPQ:1
3M
ECAD Model:
30-Pin Strain Relief, 4600 Series
Available Stock
535
Estimated Ship Time:9-14 working days
1+$5.7348
10+$4.8719
300+$3.8322
500+$3.7397
- +
Ext. Price(USD):$28.67
MOQ:5
Mult:1
SPQ:1
25 / PageGoto