Connectors Accessories

Results:

Connector accessories complete specific mechanical, retention, sealing and protection functions within a rectangular connector system. This category includes terminal locks, retainers, wedge locks, seals, gaskets and backshells. Start with the main connector manufacturer, series and housing part number, then match the accessory by function, installed position and specified compatibility.

Start with the Missing Function

Identify what the completed connector assembly needs before searching by accessory appearance. One connector system may require several accessories serving different mechanical or environmental roles.

Required function Typical accessories
Prevent terminal back-out TPA, secondary lock or terminal retainer
Secure the mating pair CPA, wedge lock, latch or locking component
Seal the interface Interface seal, wire seal, gasket or cavity plug
Protect the cable exit Backshell, boot or strain-relief component
Support mounting or routing Bracket, clip, housing retainer or wire guide
Protect an unmated interface Dust cap or protective cover

Use the Main Connector as the Compatibility Key

Manufacturer → Product series → Housing part number → Plug or receptacle side → Accessory part number

Confirm the accessory in the manufacturer’s product drawing, application specification or accessory table. Continue checking positions, housing or shell size, orientation and product revision even when two components share the same series name. If the main connector body has not been selected, begin with Rectangular Connector Housings.

Match the Installed Position

Installation point Compatibility checks
Contact cavity Terminal size, locking lance, TPA orientation and insertion sequence
Mating interface Positions, keying, interface seal and connector side
Wire entry Wire gauge, insulation diameter and individual wire seal
Rear of housing Straight or right-angle exit, backshell size and cable clearance
Panel or enclosure Gasket, bracket, clip, mounting feature and panel thickness
Unused cavity or open face Cavity plug, dust cap and required environmental protection

Terminal locks and retainers must also match the conductive parts installed in the housing. Browse Rectangular Connector Contacts for compatible pins, sockets and crimp terminals.

Build the Complete Sealing System

Environmental protection can depend on several coordinated components: the sealed housing, mating-interface seal, individual wire seals, cavity plugs for unused positions, and any specified backshell or boot. Match each wire seal to the permitted insulation diameter and install every component in the manufacturer’s stated sequence.

A seal or gasket does not establish an IP rating by itself. Apply a sealing or protection rating only when it is specified for the complete connector assembly in its fully mated and correctly installed condition.

Separate the Retention Functions

  • Terminal retention: Holds each contact inside its housing cavity.
  • TPA or secondary lock: Confirms and reinforces terminal seating.
  • CPA: Confirms that the two connector housings are fully mated.
  • Wedge lock: Retains or positions contacts in specified connector families.
  • Panel retainer: Secures the connector housing to its mounting feature.
  • Strain relief: Reduces cable force and bending at the wire termination.

For more detail on housings, terminals, seals, TPA/CPA components and connector assembly records, see the Wiring Harness Connector Types guide.

Complete the Accessory BOM

Record the main housing, mating connector, contacts, seals, locks, backshell or strain-relief parts, mounting hardware and required tooling. Include the quantity of every accessory; one connector may need multiple individual wire seals, cavity plugs and retention components.

If the complete connector type or connection path has not yet been selected, return to Rectangular Connectors before finalizing the accessory list.

Read More
Connectors AccessoriesResults:
Comprehensive
Price Priority
Stock Priority
Image
Part Number
Description
Availability
Unit Price(USD)
Quantity
Operation
Shell, RPRM Series
Available Stock
351
Estimated Ship Time:6-13 working days
1+$47.861
250+$22.7232
- +
Ext. Price(USD):$47.86
MOQ:1
Mult:1
SPQ:1
Screws, Thread Mount
Available Stock
394
Estimated Ship Time:7-9 working days
17+
65+$1.804
200+$1.573
5,000+$1.353
10,000+$1.309
- +
Ext. Price(USD):$117.26
MOQ:65
Mult:1
SPQ:1
Keying Plate DMC-MD Inserts
Available Stock
552
Estimated Ship Time:9-14 working days
5+$60.1992
10+$57.1892
1,000+$46.5821
10,000+$44.2524
- +
Ext. Price(USD):$300.99
MOQ:5
Mult:5
SPQ:1
Molex
ECAD Model:
3-Pin Terminal Position Assurance (TPA) 49624 Series Wire Mount
Available Stock
461,000
Estimated Ship Time:7-9 working days
15+
1,112+$0.1045
2,800+$0.1023
150,000+$0.077
375,000+$0.0726
- +
Ext. Price(USD):$116.20
MOQ:1,112
Mult:1
SPQ:1
Cap (Cover) HVA 630 Series
Available Stock
575
Estimated Ship Time:6-13 working days
1+$2.6565
10+$2.4725
3,000+$1.3824
5,400+$1.3392
- +
Ext. Price(USD):$15.93
MOQ:6
Mult:1
SPQ:1
Polarizing Device (Key, Plug, Post) Mini-Box Series External Mount
Available Stock
1,282
Estimated Ship Time:7-9 working days
19+
10+$11.077
25+$10.89
500+$8.305
1,000+$7.557
- +
Ext. Price(USD):$110.77
MOQ:10
Mult:1
SPQ:1
8-Pin Lock, 21mm × 28.6mm × 13.3mm
Available Stock
9,400
Estimated Ship Time:7-9 working days
21+
200+$0.572
500+$0.561
1,000+$0.55
4,000+$0.539
- +
Ext. Price(USD):$114.40
MOQ:200
Mult:1
SPQ:1
2-Pin Cap (Cover), Dust, SMD, 9.8mm × 5.85mm × 5.5mm
Available Stock
4,984
Estimated Ship Time:6-13 working days
10+$1.173
25+$0.8349
2,500+$0.6523
5,000+$0.6458
- +
Ext. Price(USD):$14.07
MOQ:12
Mult:1
SPQ:1
Molex
ECAD Model:
4-Pin Wedgelock ML-XT 93444 Housings
Available Stock
4,361
Estimated Ship Time:7-9 working days
18+
350+$0.1672
4,000+$0.1595
- +
Ext. Price(USD):$58.52
MOQ:350
Mult:1
SPQ:1
Deutsch Wedge Lock, DT Series, 2-Pos
Available Stock
1,381
Estimated Ship Time:5-10 working days
1+$8.234
15+$7.9918
50+$7.7497
100+$7.6222
250+$7.4565
- +
Ext. Price(USD):$8.23
MOQ:1
Mult:1
10-Pin Cap (Cover), Front AMPMODU MT Series, 12.7mm L
Available Stock
403
Estimated Ship Time:7-9 working days
13+
35+$3.41
85+$3.355
200+$3.3
350+$3.234
- +
Ext. Price(USD):$119.35
MOQ:35
Mult:1
SPQ:1
Molex
ECAD Model:
30-Pin Shroud C-Grid SL Series Clip Mount 42.31mm (L) × 19.05mm (H)
Available Stock
50
Estimated Ship Time:9-14 working days
50+$10.8
100+$10.584
500+$10.3723
1,000+$10.1649
5,000+$9.9616
- +
Ext. Price(USD):$540.00
MOQ:50
Mult:50
SPQ:1
19-Pin Cap (Cover), Strain Relief, MTA-100 Series
Available Stock
574
Estimated Ship Time:7-9 working days
13+
250+$0.528
550+$0.517
- +
Ext. Price(USD):$132.00
MOQ:250
Mult:1
SPQ:1
24-Pin Cap (Cover), AMPMODU Level V Series
Available Stock
1,986
Estimated Ship Time:7-9 working days
24+
150+$1.243
350+$1.188
1,400+$1.166
- +
Ext. Price(USD):$186.45
MOQ:150
Mult:1
SPQ:1
Molex
ECAD Model:
16-Pin Clip Mini Mi II 54596 Series, Adhesive Mount, 13.843mm L × 5.7912mm W
Available Stock
7,457
Estimated Ship Time:7-9 working days
19+
926+$0.0627
- +
Ext. Price(USD):$58.06
MOQ:926
Mult:1
SPQ:1
ITT Cannon
ECAD Model:
12-Pin Hood and Strain Relief Trident Rectangular Plugs
Available Stock
65
Estimated Ship Time:5-12 working days
5+$7.2565
25+$5.819
2,500+$2.8141
5,000+$2.4075
- +
Ext. Price(USD):$36.28
MOQ:5
Mult:1
SPQ:1
Strain Relief 14-Pin
Available Stock
11,100
Estimated Ship Time:7-9 working days
18+
600+$0.1848
1,500+$0.1815
3,000+$0.1782
5,000+$0.1716
10,000+$0.1595
- +
Ext. Price(USD):$110.88
MOQ:600
Mult:1
SPQ:1
TE Connectivity D-Sub Connector Accessory, AMPLIMITE Series, For Ribbon Cable Interconnect
Available Stock
1,906
Estimated Ship Time:7-9 working days
23+
500+$0.2783
2,500+$0.2783
5,000+$0.2453
10,000+$0.2376
- +
Ext. Price(USD):$139.15
MOQ:500
Mult:250
SPQ:250
JAE
ECAD Model:
4-Pin Retainer, MX44 Series, Fixed Mount
Available Stock
1,036
Estimated Ship Time:9-14 working days
10+$1.3781
25+$1.2917
1,400+$0.9721
2,800+$0.9257
- +
Ext. Price(USD):$26.18
MOQ:19
Mult:1
SPQ:1
3M
ECAD Model:
34pin Strain Relief 3000 Series 46.2mm × 13.5mm
Available Stock
90
Estimated Ship Time:9-14 working days
1+$3.5316
10+$2.9959
1,000+$2.1645
2,500+$2.0291
- +
Ext. Price(USD):$28.25
MOQ:8
Mult:1
SPQ:1
Molex
ECAD Model:
Molex Connector Retainer, For 172708/172762/172767/200453/200471 Mini-Fit TPA2 Housing
Available Stock
7,381
Estimated Ship Time:6-13 working days
25+$0.2047
100+$0.1875
4,800+$0.1404
11,200+$0.1188
- +
Ext. Price(USD):$14.12
MOQ:69
Mult:1
SPQ:1
7-Pin Terminal Position Assurance (TPA) Economy Power Series
Available Stock
35,250
Estimated Ship Time:7-9 working days
19+
2,000+$0.0671
4,000+$0.0616
25,000+$0.0539
- +
Ext. Price(USD):$134.20
MOQ:2,000
Mult:1
SPQ:1
24-Pin Cap (Cover), Front AMPMODU MT Series
Available Stock
378
Estimated Ship Time:6-13 working days
1+$8.9355
10+$7.733
250+$4.7412
1,000+$4.7304
- +
Ext. Price(USD):$17.87
MOQ:2
Mult:1
SPQ:1
15-Pin Strain Relief MR (Miniature Rectangular) Series 25.4mm L
Available Stock
117
Estimated Ship Time:6-13 working days
1+$11.477
10+$9.328
500+$6.9444
1,000+$6.6096
- +
Ext. Price(USD):$22.95
MOQ:2
Mult:1
SPQ:1
Ferrule
Available Stock
12,880
Estimated Ship Time:6-13 working days
1+$1.633
10+$1.3915
1,000+$0.9418
2,000+$0.8716
- +
Ext. Price(USD):$15.30
MOQ:11
Mult:1
SPQ:1
25 / PageGoto