Connectors Accessories

Results:

Connector accessories complete specific mechanical, retention, sealing and protection functions within a rectangular connector system. This category includes terminal locks, retainers, wedge locks, seals, gaskets and backshells. Start with the main connector manufacturer, series and housing part number, then match the accessory by function, installed position and specified compatibility.

Start with the Missing Function

Identify what the completed connector assembly needs before searching by accessory appearance. One connector system may require several accessories serving different mechanical or environmental roles.

Required function Typical accessories
Prevent terminal back-out TPA, secondary lock or terminal retainer
Secure the mating pair CPA, wedge lock, latch or locking component
Seal the interface Interface seal, wire seal, gasket or cavity plug
Protect the cable exit Backshell, boot or strain-relief component
Support mounting or routing Bracket, clip, housing retainer or wire guide
Protect an unmated interface Dust cap or protective cover

Use the Main Connector as the Compatibility Key

Manufacturer → Product series → Housing part number → Plug or receptacle side → Accessory part number

Confirm the accessory in the manufacturer’s product drawing, application specification or accessory table. Continue checking positions, housing or shell size, orientation and product revision even when two components share the same series name. If the main connector body has not been selected, begin with Rectangular Connector Housings.

Match the Installed Position

Installation point Compatibility checks
Contact cavity Terminal size, locking lance, TPA orientation and insertion sequence
Mating interface Positions, keying, interface seal and connector side
Wire entry Wire gauge, insulation diameter and individual wire seal
Rear of housing Straight or right-angle exit, backshell size and cable clearance
Panel or enclosure Gasket, bracket, clip, mounting feature and panel thickness
Unused cavity or open face Cavity plug, dust cap and required environmental protection

Terminal locks and retainers must also match the conductive parts installed in the housing. Browse Rectangular Connector Contacts for compatible pins, sockets and crimp terminals.

Build the Complete Sealing System

Environmental protection can depend on several coordinated components: the sealed housing, mating-interface seal, individual wire seals, cavity plugs for unused positions, and any specified backshell or boot. Match each wire seal to the permitted insulation diameter and install every component in the manufacturer’s stated sequence.

A seal or gasket does not establish an IP rating by itself. Apply a sealing or protection rating only when it is specified for the complete connector assembly in its fully mated and correctly installed condition.

Separate the Retention Functions

  • Terminal retention: Holds each contact inside its housing cavity.
  • TPA or secondary lock: Confirms and reinforces terminal seating.
  • CPA: Confirms that the two connector housings are fully mated.
  • Wedge lock: Retains or positions contacts in specified connector families.
  • Panel retainer: Secures the connector housing to its mounting feature.
  • Strain relief: Reduces cable force and bending at the wire termination.

For more detail on housings, terminals, seals, TPA/CPA components and connector assembly records, see the Wiring Harness Connector Types guide.

Complete the Accessory BOM

Record the main housing, mating connector, contacts, seals, locks, backshell or strain-relief parts, mounting hardware and required tooling. Include the quantity of every accessory; one connector may need multiple individual wire seals, cavity plugs and retention components.

If the complete connector type or connection path has not yet been selected, return to Rectangular Connectors before finalizing the accessory list.

Read More
Connectors AccessoriesResults:
Comprehensive
Price Priority
Stock Priority
Image
Part Number
Description
Availability
Unit Price(USD)
Quantity
Operation
40-Pin Strain Relief
Available Stock
26,417
Estimated Ship Time:7-9 working days
20+
300+$0.429
650+$0.418
1,300+$0.407
5,000+$0.396
10,000+$0.363
- +
Ext. Price(USD):$128.70
MOQ:300
Mult:1
SPQ:1
Shield, MTC Series
Available Stock
196
Estimated Ship Time:7-9 working days
24+
3+$38.06
8+$37.411
15+$36.751
29+$36.091
- +
Ext. Price(USD):$114.18
MOQ:3
Mult:1
SPQ:1
Molex
ECAD Model:
Cap (Cover) 31.24mm L × 7.87mm H
Available Stock
800
Estimated Ship Time:7-9 working days
12+
162+$0.363
- +
Ext. Price(USD):$58.80
MOQ:162
Mult:1
SPQ:1
Mounting Base, DMC-MD Inserts
Available Stock
28
Estimated Ship Time:9-14 working days
2+$1,049.8626
10+$1,028.8642
50+$1,008.2874
100+$988.1216
500+$968.3592
- +
Ext. Price(USD):$2,099.72
MOQ:2
Mult:2
SPQ:1
Molex
ECAD Model:
38-Pin Shroud C-Grid SL Series, Clip Mount, 52.47mm L × 19.05mm H
Available Stock
50
Estimated Ship Time:9-14 working days
50+$10.8
100+$10.584
500+$10.3723
1,000+$10.1649
5,000+$9.9616
- +
Ext. Price(USD):$540.00
MOQ:50
Mult:50
SPQ:1
6-Pin Cap (Cover), Front AMPMODU MT Series 7.62mm L
Available Stock
13,367
Estimated Ship Time:7-9 working days
12+
40+$2.948
95+$2.904
200+$2.849
400+$2.794
- +
Ext. Price(USD):$117.92
MOQ:40
Mult:1
SPQ:1
Mounting Base DMC-MD Inserts, Bracket Mount, Panel Mount
Available Stock
28
Estimated Ship Time:9-14 working days
5+$231.7853
10+$227.1499
50+$222.6066
100+$218.1544
500+$213.7913
- +
Ext. Price(USD):$1,158.92
MOQ:5
Mult:5
SPQ:1
13-Pin Shroud AMPMODU MTE Series Panel Mount
Available Stock
379
Estimated Ship Time:7-9 working days
11+
200+$0.99
- +
Ext. Price(USD):$198.00
MOQ:200
Mult:1
SPQ:1
Molex
ECAD Model:
Plug, Sealing KK Series Seal Mount
Available Stock
32,371
Estimated Ship Time:7-9 working days
22+
412+$0.2838
1,100+$0.2783
15,000+$0.2453
30,000+$0.2145
- +
Ext. Price(USD):$116.92
MOQ:412
Mult:1
SPQ:1
Molex
ECAD Model:
SRC M Cond Interface RH40
Available Stock
38
Estimated Ship Time:7-9 working days
16+
15+$4.147
- +
Ext. Price(USD):$62.20
MOQ:15
Mult:1
SPQ:1
Protective Cover AT Series, 12-Pin, 15-Pin, 18-Pin
Available Stock
925
Estimated Ship Time:6-13 working days
1+$2.185
10+$1.863
2,500+$1.0249
5,000+$1.0044
- +
Ext. Price(USD):$15.29
MOQ:7
Mult:1
SPQ:1
Adam Tech
ECAD Model:
Strain Relief 14-Pin 2FCS Series
Available Stock
924
Estimated Ship Time:9-14 working days
100+$0.201
250+$0.1884
500+$0.1794
- +
Ext. Price(USD):$26.13
MOQ:130
Mult:1
SPQ:1
Amphenol
ECAD Model:
2pin Cap (Cover) ePower Series
Available Stock
80
Estimated Ship Time:9-14 working days
1+$107.6112
10+$91.4695
25+$85.7477
50+$81.6597
100+$77.7682
- +
Ext. Price(USD):$107.61
MOQ:1
Mult:1
SPQ:1
10-Pin Cap (Cover), AMP-LATCH Series
Available Stock
3,385
Estimated Ship Time:7-9 working days
16+
20+$7.15
40+$7.018
80+$6.897
200+$6.776
- +
Ext. Price(USD):$143.00
MOQ:20
Mult:1
SPQ:1
26-Pin Cap (Cover) AMPMODU Mod IV Series 49.3mm L × 14.6mm H
Available Stock
1,191
Estimated Ship Time:6-13 working days
1+$2.852
10+$2.4955
2,800+$1.3608
5,600+$1.35
- +
Ext. Price(USD):$14.26
MOQ:5
Mult:1
SPQ:1
Retainer Clip, DF1E Series, 6-Pin, Bracket Mount
Available Stock
24,097
Estimated Ship Time:6-13 working days
25+$0.3899
100+$0.3542
300+$0.3168
1,000+$0.3024
2,500+$0.284
- +
Ext. Price(USD):$14.03
MOQ:36
Mult:1
SPQ:1
Receptacle Frame, Bracket Mount
Available Stock
70
Estimated Ship Time:6-13 working days
1+$2.967
10+$2.7945
25+$2.486
- +
Ext. Price(USD):$14.83
MOQ:5
Mult:1
SPQ:1
3M
ECAD Model:
60-Pin Strain Relief, 3000 Series, 79.2mm(L)
Available Stock
60
Estimated Ship Time:9-14 working days
1+$3.564
10+$3.0262
25+$2.8361
50+$2.7006
- +
Ext. Price(USD):$28.51
MOQ:8
Mult:1
SPQ:1
Amphenol
ECAD Model:
6pin Wedge for Sockets ATP Series™
Available Stock
899
Estimated Ship Time:6-13 working days
10+$0.8142
25+$0.7268
5,000+$0.4633
10,000+$0.4558
- +
Ext. Price(USD):$14.65
MOQ:18
Mult:1
SPQ:1
Molex
ECAD Model:
Molex Backshell 204723 Series For Mini-Fit Jr Plug & Receptacle Housing
Available Stock
6,391
Estimated Ship Time:7-10 working days
22+
388+$0.3003
1,000+$0.2948
2,000+$0.2893
3,900+$0.2838
8,000+$0.2772
- +
Ext. Price(USD):$116.51
MOQ:388
Mult:1
SPQ:1
Connector 12-Pin Boot ATM Series
Available Stock
757
Estimated Ship Time:6-13 working days
1+$2.277
10+$1.9435
2,700+$1.0724
5,100+$1.053
- +
Ext. Price(USD):$15.93
MOQ:7
Mult:1
SPQ:1
Harwin
ECAD Model:
Nut Datamate
Available Stock
6,756
Estimated Ship Time:5-12 working days
108+$0.4196
504+$0.341
25,008+$0.2981
50,004+$0.2974
- +
Ext. Price(USD):$45.31
MOQ:108
Mult:12
SPQ:12
Available Stock
3,160
Estimated Ship Time:6-13 working days
25+$0.3002
100+$0.2703
1,000+$0.1825
2,500+$0.1814
- +
Ext. Price(USD):$14.10
MOQ:47
Mult:1
SPQ:1
23-Pin Cap (Cover), Strain Relief MTA-100 Series Board Mount
Available Stock
2,089
Estimated Ship Time:7-9 working days
14+
250+$0.528
550+$0.517
2,000+$0.495
- +
Ext. Price(USD):$132.00
MOQ:250
Mult:1
SPQ:1
60-Pin Taper Block, 53 Series, Taper Pins, Adhesive Mount, 111.51mm L
Available Stock
32
Estimated Ship Time:7-9 working days
18+
1+$574.86
2+$563.805
- +
Ext. Price(USD):$574.86
MOQ:1
Mult:1
SPQ:1
25 / PageGoto