Connectors Accessories

Results:

Connector accessories complete specific mechanical, retention, sealing and protection functions within a rectangular connector system. This category includes terminal locks, retainers, wedge locks, seals, gaskets and backshells. Start with the main connector manufacturer, series and housing part number, then match the accessory by function, installed position and specified compatibility.

Start with the Missing Function

Identify what the completed connector assembly needs before searching by accessory appearance. One connector system may require several accessories serving different mechanical or environmental roles.

Required function Typical accessories
Prevent terminal back-out TPA, secondary lock or terminal retainer
Secure the mating pair CPA, wedge lock, latch or locking component
Seal the interface Interface seal, wire seal, gasket or cavity plug
Protect the cable exit Backshell, boot or strain-relief component
Support mounting or routing Bracket, clip, housing retainer or wire guide
Protect an unmated interface Dust cap or protective cover

Use the Main Connector as the Compatibility Key

Manufacturer → Product series → Housing part number → Plug or receptacle side → Accessory part number

Confirm the accessory in the manufacturer’s product drawing, application specification or accessory table. Continue checking positions, housing or shell size, orientation and product revision even when two components share the same series name. If the main connector body has not been selected, begin with Rectangular Connector Housings.

Match the Installed Position

Installation point Compatibility checks
Contact cavity Terminal size, locking lance, TPA orientation and insertion sequence
Mating interface Positions, keying, interface seal and connector side
Wire entry Wire gauge, insulation diameter and individual wire seal
Rear of housing Straight or right-angle exit, backshell size and cable clearance
Panel or enclosure Gasket, bracket, clip, mounting feature and panel thickness
Unused cavity or open face Cavity plug, dust cap and required environmental protection

Terminal locks and retainers must also match the conductive parts installed in the housing. Browse Rectangular Connector Contacts for compatible pins, sockets and crimp terminals.

Build the Complete Sealing System

Environmental protection can depend on several coordinated components: the sealed housing, mating-interface seal, individual wire seals, cavity plugs for unused positions, and any specified backshell or boot. Match each wire seal to the permitted insulation diameter and install every component in the manufacturer’s stated sequence.

A seal or gasket does not establish an IP rating by itself. Apply a sealing or protection rating only when it is specified for the complete connector assembly in its fully mated and correctly installed condition.

Separate the Retention Functions

  • Terminal retention: Holds each contact inside its housing cavity.
  • TPA or secondary lock: Confirms and reinforces terminal seating.
  • CPA: Confirms that the two connector housings are fully mated.
  • Wedge lock: Retains or positions contacts in specified connector families.
  • Panel retainer: Secures the connector housing to its mounting feature.
  • Strain relief: Reduces cable force and bending at the wire termination.

For more detail on housings, terminals, seals, TPA/CPA components and connector assembly records, see the Wiring Harness Connector Types guide.

Complete the Accessory BOM

Record the main housing, mating connector, contacts, seals, locks, backshell or strain-relief parts, mounting hardware and required tooling. Include the quantity of every accessory; one connector may need multiple individual wire seals, cavity plugs and retention components.

If the complete connector type or connection path has not yet been selected, return to Rectangular Connectors before finalizing the accessory list.

Read More
Connectors AccessoriesResults:
Comprehensive
Price Priority
Stock Priority
Image
Part Number
Description
Availability
Unit Price(USD)
Quantity
Operation
Pancon
ECAD Model:
Connector Accessories, Strain Relief, Combination Cover, Straight, Nylon, MAS-CON®, Bag
Available Stock
2,788
Estimated Ship Time:5-12 working days
180+$0.6336
500+$0.3168
5,000+$0.1249
10,000+$0.1117
- +
Ext. Price(USD):$114.04
MOQ:180
Mult:1
SPQ:500
6-Pin Cap (Cover), Dust
Available Stock
1,000
Estimated Ship Time:7-9 working days
20+
162+$0.682
2,500+$0.682
25,000+$0.517
50,000+$0.506
- +
Ext. Price(USD):$110.48
MOQ:162
Mult:1
SPQ:1
Amphenol
ECAD Model:
Plug, Sealing, Adhesive Mount
Available Stock
449
Estimated Ship Time:9-14 working days
25+$0.7176
50+$0.6834
100+$0.6507
250+$0.6099
- +
Ext. Price(USD):$26.55
MOQ:37
Mult:1
SPQ:1
8-Pin Shell Sumicon 1600 Series Connectors
Available Stock
50
Estimated Ship Time:6-13 working days
1+$13.317
10+$10.9728
200+$8.2944
500+$7.9704
- +
Ext. Price(USD):$26.63
MOQ:2
Mult:1
SPQ:1
10-Pin Terminal Position Assurance (TPA) Connector, Grace Inertia Series
Available Stock
5,880
Estimated Ship Time:7-9 working days
15+
3,000+$0.0418
9,000+$0.0374
27,000+$0.0319
51,000+$0.0308
- +
Ext. Price(USD):$125.40
MOQ:3,000
Mult:1,500
SPQ:1,500
Molex
ECAD Model:
5-Pin Terminal Position Assurance (TPA) Mini-Fit Series
Available Stock
10,332
Estimated Ship Time:9-14 working days
25+$0.6644
50+$0.6329
1,000+$0.5121
2,500+$0.48
- +
Ext. Price(USD):$26.57
MOQ:40
Mult:1
SPQ:1
Harwin
ECAD Model:
Polarizing Device (Key, Plug, Post) M20 Series
Available Stock
13,811
Estimated Ship Time:9-14 working days
100+$0.2229
300+$0.2062
500+$0.1989
1,000+$0.1894
2,500+$0.1775
- +
Ext. Price(USD):$26.07
MOQ:117
Mult:1
SPQ:1
Connector 12-Pin Boot ATM Series
Available Stock
258
Estimated Ship Time:6-13 working days
1+$1.8285
10+$1.564
2,800+$0.8834
5,200+$0.8618
- +
Ext. Price(USD):$14.62
MOQ:8
Mult:1
SPQ:1
Deutsch Connector Accessory Rear Cover Base Shell DT Series 2 Contacts
Available Stock
4,785
Estimated Ship Time:5-10 working days
5+$1.6366
- +
Ext. Price(USD):$8.18
MOQ:5
Mult:5
Cap (Cover) Heavy Duty Sealed Connector Series, 2-Pin, 3-Pin, Adhesive Mount
Available Stock
704
Estimated Ship Time:5-12 working days
50+$0.579
500+$0.45
15,000+$0.3549
25,500+$0.3511
- +
Ext. Price(USD):$30.10
MOQ:52
Mult:1
SPQ:1,500
Samtec
ECAD Model:
Samtec Contact, Pin, for Seam Series
Available Stock
5,312
Estimated Ship Time:6-13 working days
1+$5.106
25+$4.3416
1,000+$3.2184
2,500+$2.7864
- +
Ext. Price(USD):$15.31
MOQ:3
Mult:1
SPQ:1
ITT Cannon
ECAD Model:
4-Pin Hood and Strain Relief Trident Rectangular Plug
Available Stock
251
Estimated Ship Time:7-9 working days
15+
38+$2.904
100+$2.904
200+$2.244
- +
Ext. Price(USD):$110.35
MOQ:38
Mult:1
SPQ:1
Polyester PCB Connector Covers: 2.54mm Strain Relief, Dust Protection, MTA 100
Available Stock
2,763
Estimated Ship Time:5-12 working days
250+$0.0933
2,500+$0.073
100,000+$0.051
150,000+$0.0509
- +
Ext. Price(USD):$30.04
MOQ:322
Mult:1
SPQ:1
3M
ECAD Model:
Strain Relief, 16-Pin, 4600 Series, 29.2mm L × 6.1mm H
Available Stock
172
Estimated Ship Time:9-14 working days
10+$2.0131
25+$1.887
1,000+$1.4541
2,500+$1.3631
- +
Ext. Price(USD):$26.17
MOQ:13
Mult:1
SPQ:1
TE Connectivity Automotive TPA Lock Plate, EconoSeal J Mark II Series, 4 Pos
Available Stock
27,343
Estimated Ship Time:6-13 working days
10+$0.6578
25+$0.5865
5,000+$0.3974
10,000+$0.3737
- +
Ext. Price(USD):$14.47
MOQ:22
Mult:1
SPQ:1
Adam Tech
ECAD Model:
3-Pin Cap (Cover), MTD-A Series
Available Stock
861
Estimated Ship Time:9-14 working days
100+$0.2011
250+$0.1885
500+$0.1795
- +
Ext. Price(USD):$26.14
MOQ:130
Mult:1
SPQ:1
EDAC
ECAD Model:
EDAC 570 Series 570-260-004 Wire Seal, For Waterproof Connectors
Available Stock
1,460
Estimated Ship Time:5-10 working days
10+$0.1759
500+$0.1721
2,500+$0.1683
- +
Ext. Price(USD):$7.03
MOQ:40
Mult:10
3M
ECAD Model:
10-Pin Strain Relief, 891 Series
Available Stock
2,329
Estimated Ship Time:6-13 working days
10+$0.6072
25+$0.5428
3,000+$0.3812
5,000+$0.3748
- +
Ext. Price(USD):$14.11
MOQ:26
Mult:1
SPQ:1
ITT Cannon
ECAD Model:
3-Pin Wedgelock IT Series Connector
Available Stock
184,086
Estimated Ship Time:7-9 working days
22+
800+$0.143
3,900+$0.1364
7,700+$0.1309
38,500+$0.1254
115,400+$0.121
- +
Ext. Price(USD):$114.40
MOQ:800
Mult:1
SPQ:1
TE Connectivity Pluggable IO Connector, Male Plug
Available Stock
6,590
Estimated Ship Time:5-12 working days
5+$5.9225
25+$5.412
960+$4.6973
1,440+$4.6438
- +
Ext. Price(USD):$35.53
MOQ:6
Mult:1
SPQ:480
20-Pin Backshell PQ50 Series
Available Stock
2
Estimated Ship Time:6-13 working days
1+$35.024
10+$27.7128
25+$26.4924
50+$25.488
100+$24.6888
- +
Ext. Price(USD):$35.02
MOQ:1
Mult:1
SPQ:1
Nylon PCB Connector Covers: 2.54mm Strain Relief, MTA 100
Available Stock
758
Estimated Ship Time:6-13 working days
10+$0.7027
25+$0.6429
5,000+$0.3542
10,000+$0.3499
- +
Ext. Price(USD):$14.05
MOQ:20
Mult:1
SPQ:1
Amphenol
ECAD Model:
Socket Wedge, 4-Pin, ATP Series
Available Stock
831
Estimated Ship Time:6-13 working days
25+$0.4186
100+$0.3817
5,500+$0.2732
10,450+$0.2668
- +
Ext. Price(USD):$14.23
MOQ:34
Mult:1
SPQ:1
Jackscrew, Slotted D-Sub Connector 13.5mm (L) × 4.8mm (H)
Available Stock
10,888
Estimated Ship Time:6-13 working days
1+$2.9095
10+$2.5415
2,500+$1.512
5,000+$1.4472
- +
Ext. Price(USD):$14.54
MOQ:5
Mult:1
SPQ:1
2-Pin Commoning Bar, AMPMODU Mod IV Series
Available Stock
30,000
Estimated Ship Time:7-9 working days
15+
2,000+$0.0671
5,000+$0.066
20,000+$0.0627
25,000+$0.0418
- +
Ext. Price(USD):$134.20
MOQ:2,000
Mult:1,000
SPQ:1,000
25 / PageGoto