Connectors Accessories

Results:

Connector accessories complete specific mechanical, retention, sealing and protection functions within a rectangular connector system. This category includes terminal locks, retainers, wedge locks, seals, gaskets and backshells. Start with the main connector manufacturer, series and housing part number, then match the accessory by function, installed position and specified compatibility.

Start with the Missing Function

Identify what the completed connector assembly needs before searching by accessory appearance. One connector system may require several accessories serving different mechanical or environmental roles.

Required function Typical accessories
Prevent terminal back-out TPA, secondary lock or terminal retainer
Secure the mating pair CPA, wedge lock, latch or locking component
Seal the interface Interface seal, wire seal, gasket or cavity plug
Protect the cable exit Backshell, boot or strain-relief component
Support mounting or routing Bracket, clip, housing retainer or wire guide
Protect an unmated interface Dust cap or protective cover

Use the Main Connector as the Compatibility Key

Manufacturer → Product series → Housing part number → Plug or receptacle side → Accessory part number

Confirm the accessory in the manufacturer’s product drawing, application specification or accessory table. Continue checking positions, housing or shell size, orientation and product revision even when two components share the same series name. If the main connector body has not been selected, begin with Rectangular Connector Housings.

Match the Installed Position

Installation point Compatibility checks
Contact cavity Terminal size, locking lance, TPA orientation and insertion sequence
Mating interface Positions, keying, interface seal and connector side
Wire entry Wire gauge, insulation diameter and individual wire seal
Rear of housing Straight or right-angle exit, backshell size and cable clearance
Panel or enclosure Gasket, bracket, clip, mounting feature and panel thickness
Unused cavity or open face Cavity plug, dust cap and required environmental protection

Terminal locks and retainers must also match the conductive parts installed in the housing. Browse Rectangular Connector Contacts for compatible pins, sockets and crimp terminals.

Build the Complete Sealing System

Environmental protection can depend on several coordinated components: the sealed housing, mating-interface seal, individual wire seals, cavity plugs for unused positions, and any specified backshell or boot. Match each wire seal to the permitted insulation diameter and install every component in the manufacturer’s stated sequence.

A seal or gasket does not establish an IP rating by itself. Apply a sealing or protection rating only when it is specified for the complete connector assembly in its fully mated and correctly installed condition.

Separate the Retention Functions

  • Terminal retention: Holds each contact inside its housing cavity.
  • TPA or secondary lock: Confirms and reinforces terminal seating.
  • CPA: Confirms that the two connector housings are fully mated.
  • Wedge lock: Retains or positions contacts in specified connector families.
  • Panel retainer: Secures the connector housing to its mounting feature.
  • Strain relief: Reduces cable force and bending at the wire termination.

For more detail on housings, terminals, seals, TPA/CPA components and connector assembly records, see the Wiring Harness Connector Types guide.

Complete the Accessory BOM

Record the main housing, mating connector, contacts, seals, locks, backshell or strain-relief parts, mounting hardware and required tooling. Include the quantity of every accessory; one connector may need multiple individual wire seals, cavity plugs and retention components.

If the complete connector type or connection path has not yet been selected, return to Rectangular Connectors before finalizing the accessory list.

Read More
Connectors AccessoriesResults:
Comprehensive
Price Priority
Stock Priority
Image
Part Number
Description
Availability
Unit Price(USD)
Quantity
Operation
Cap (Cover), Strain Relief, MTA-156 Series, 24-Pin, TH, 11.18mm H
Available Stock
1,052
Estimated Ship Time:7-9 working days
13+
300+$0.407
800+$0.363
- +
Ext. Price(USD):$122.10
MOQ:300
Mult:100
SPQ:100
Molex
ECAD Model:
Molex MX150 Series Connector Backshell, 32.93mm W x 53.56mm H, Black
Available Stock
14,915
Estimated Ship Time:7-9 working days
21+
102+$1.155
320+$1.133
7,680+$0.99
16,000+$0.88
- +
Ext. Price(USD):$117.81
MOQ:102
Mult:1
SPQ:1
Molex
ECAD Model:
Molex Connector Cover, Flat Cap for Mini-Fit Sigma Sealed Plug Housing
Available Stock
7,425
Estimated Ship Time:7-9 working days
22+
414+$0.2827
1,100+$0.2761
2,100+$0.2717
2,950+$0.2607
- +
Ext. Price(USD):$117.03
MOQ:414
Mult:1
SPQ:1
Molex
ECAD Model:
Terminal Block Housing, 2-Pos, 3mm Pitch, 1 Row
Available Stock
41,554
Estimated Ship Time:7-9 working days
22+
2,381+$0.0495
6,000+$0.0473
12,000+$0.0462
21,000+$0.0451
- +
Ext. Price(USD):$117.85
MOQ:2,381
Mult:1
SPQ:1
Molex
ECAD Model:
Connector 16-Pin Shroud C-Grid SL Series Wire Mount 56.99mm L × 8.12mm H
Available Stock
50
Estimated Ship Time:9-14 working days
50+$10.8
100+$10.584
500+$10.3723
1,000+$10.1649
5,000+$9.9616
- +
Ext. Price(USD):$540.00
MOQ:50
Mult:50
SPQ:1
12-Pin Retainer, iBridge Ultra Female Connector
Available Stock
10,020
Estimated Ship Time:5-12 working days
500+$0.4259
1,000+$0.4161
10,000+$0.3517
15,000+$0.3509
- +
Ext. Price(USD):$212.95
MOQ:500
Mult:500
SPQ:500
2mm Receptacle Connector Strain Relief, Ribbon Cable, Glass-Filled Polyester, Latch, 14-50 Pins
Available Stock
3,815
Estimated Ship Time:9-14 working days
25+$0.7072
50+$0.6733
1,000+$0.5448
2,500+$0.5107
- +
Ext. Price(USD):$26.16
MOQ:37
Mult:1
SPQ:1
1-Pin Backshell DMC-MD Inserts
Available Stock
214
Estimated Ship Time:5-12 working days
1+$48.8865
5+$39.457
100+$31.137
250+$30.7946
- +
Ext. Price(USD):$48.88
MOQ:1
Mult:1
SPQ:1
2-Pin Retainer HVA 280 Series, Bracket Mount, 27.2mm L
Available Stock
532
Estimated Ship Time:5-12 working days
25+$0.9419
250+$0.8426
7,500+$0.7362
10,000+$0.7297
- +
Ext. Price(USD):$30.14
MOQ:32
Mult:1
SPQ:1
Mounting Hardware Box Series
Available Stock
100
Estimated Ship Time:7-9 working days
12+
3+$36.993
8+$36.355
15+$35.717
30+$35.079
- +
Ext. Price(USD):$110.97
MOQ:3
Mult:1
SPQ:1
Anderson Power
ECAD Model:
Handle, EBC Series
Available Stock
47
Estimated Ship Time:9-14 working days
1+$3.8556
20+$3.1185
1,000+$2.3659
2,500+$2.2179
- +
Ext. Price(USD):$26.98
MOQ:7
Mult:1
SPQ:1
Nylon PCB Connector Covers: 2.54mm Strain Relief, MTA 100
Available Stock
800
Estimated Ship Time:7-9 working days
21+
300+$0.385
1,000+$0.33
10,000+$0.2673
25,000+$0.2222
- +
Ext. Price(USD):$115.50
MOQ:300
Mult:1
SPQ:1
4-Pin Backshell AMPSEAL Connectors
Available Stock
2,300
Estimated Ship Time:7-9 working days
19+
45+$2.475
150+$2.42
500+$2.288
2,000+$2.145
- +
Ext. Price(USD):$111.37
MOQ:45
Mult:1
SPQ:1
Mounting Base, DMC-MD Inserts, Bracket Mount, TH
Available Stock
148
Estimated Ship Time:5-12 working days
1+$75.8912
10+$72.3213
150+$26.8035
200+$26.2685
- +
Ext. Price(USD):$75.89
MOQ:1
Mult:1
SPQ:1
Amphenol
ECAD Model:
3-Pin Boot, ATM Series
Available Stock
376
Estimated Ship Time:6-13 working days
10+$0.9798
25+$0.8752
2,800+$0.5454
5,200+$0.5346
- +
Ext. Price(USD):$14.69
MOQ:15
Mult:1
SPQ:1
ITT Cannon T2P Series Circular Connector Receptacle, Crimp, 18-16 AWG
Available Stock
7,035
Estimated Ship Time:6-13 working days
10+$1.2995
25+$1.111
1,000+$0.8996
5,000+$0.8899
- +
Ext. Price(USD):$14.29
MOQ:11
Mult:1
SPQ:1
Molex
ECAD Model:
8-Pin Backshell, MX150 Series
Available Stock
6,214
Estimated Ship Time:9-14 working days
10+$1.6556
25+$1.5513
1,000+$1.1956
2,500+$1.148
- +
Ext. Price(USD):$26.48
MOQ:16
Mult:1
SPQ:1
ASSMANN WSW IDC Tool, Pull and Insert Tool
Available Stock
212
Estimated Ship Time:5-10 working days
10+$0.1861
50+$0.1835
- +
Ext. Price(USD):$7.44
MOQ:40
Mult:10
12-Pin Shroud AMPMODU MTE Series Wire Mount
Available Stock
868
Estimated Ship Time:6-13 working days
1+$6.1985
10+$5.39
500+$3.9636
1,000+$3.1428
- +
Ext. Price(USD):$18.59
MOQ:3
Mult:1
SPQ:1
1-Pin Plug, Sealing AT Series 39.5mm L
Available Stock
19,452
Estimated Ship Time:6-13 working days
25+$0.3301
100+$0.3014
5,000+$0.2236
10,000+$0.2138
- +
Ext. Price(USD):$14.19
MOQ:43
Mult:1
SPQ:1
Molex
ECAD Model:
4-Pin Wedgelock ML-XT 93444 Housings
Available Stock
5,547
Estimated Ship Time:7-9 working days
19+
447+$0.1309
5,000+$0.1254
- +
Ext. Price(USD):$58.51
MOQ:447
Mult:1
SPQ:1
Harwin
ECAD Model:
8-Pin Backshell, Datamate J-Tek, Datamate Mix-Tek
Available Stock
19
Estimated Ship Time:9-14 working days
1+$131.4684
10+$111.7519
25+$104.7613
50+$99.7676
100+$95.0129
- +
Ext. Price(USD):$131.46
MOQ:1
Mult:1
SPQ:1
14-Pin Terminal Position Assurance (TPA) Economy Power Housings, Bracket Mount
Available Stock
37,437
Estimated Ship Time:6-13 working days
25+$0.2507
100+$0.2174
5,000+$0.1372
7,000+$0.1048
- +
Ext. Price(USD):$14.03
MOQ:56
Mult:1
SPQ:1
3M
ECAD Model:
Strain Relief 12-Pin 451 Series
Available Stock
50
Estimated Ship Time:9-14 working days
50+$10.8
100+$10.584
500+$10.3723
1,000+$10.1649
5,000+$9.9616
- +
Ext. Price(USD):$540.00
MOQ:50
Mult:50
SPQ:1
3-Pin Terminal Position Assurance (TPA), Economy Power Series
Available Stock
13,289
Estimated Ship Time:6-13 working days
10+$0.153
250+$0.1298
1,150+$0.1058
2,300+$0.0983
5,750+$0.0929
- +
Ext. Price(USD):$14.07
MOQ:92
Mult:1
SPQ:1
25 / PageGoto