Connectors Accessories

Results:

Connector accessories complete specific mechanical, retention, sealing and protection functions within a rectangular connector system. This category includes terminal locks, retainers, wedge locks, seals, gaskets and backshells. Start with the main connector manufacturer, series and housing part number, then match the accessory by function, installed position and specified compatibility.

Start with the Missing Function

Identify what the completed connector assembly needs before searching by accessory appearance. One connector system may require several accessories serving different mechanical or environmental roles.

Required function Typical accessories
Prevent terminal back-out TPA, secondary lock or terminal retainer
Secure the mating pair CPA, wedge lock, latch or locking component
Seal the interface Interface seal, wire seal, gasket or cavity plug
Protect the cable exit Backshell, boot or strain-relief component
Support mounting or routing Bracket, clip, housing retainer or wire guide
Protect an unmated interface Dust cap or protective cover

Use the Main Connector as the Compatibility Key

Manufacturer → Product series → Housing part number → Plug or receptacle side → Accessory part number

Confirm the accessory in the manufacturer’s product drawing, application specification or accessory table. Continue checking positions, housing or shell size, orientation and product revision even when two components share the same series name. If the main connector body has not been selected, begin with Rectangular Connector Housings.

Match the Installed Position

Installation point Compatibility checks
Contact cavity Terminal size, locking lance, TPA orientation and insertion sequence
Mating interface Positions, keying, interface seal and connector side
Wire entry Wire gauge, insulation diameter and individual wire seal
Rear of housing Straight or right-angle exit, backshell size and cable clearance
Panel or enclosure Gasket, bracket, clip, mounting feature and panel thickness
Unused cavity or open face Cavity plug, dust cap and required environmental protection

Terminal locks and retainers must also match the conductive parts installed in the housing. Browse Rectangular Connector Contacts for compatible pins, sockets and crimp terminals.

Build the Complete Sealing System

Environmental protection can depend on several coordinated components: the sealed housing, mating-interface seal, individual wire seals, cavity plugs for unused positions, and any specified backshell or boot. Match each wire seal to the permitted insulation diameter and install every component in the manufacturer’s stated sequence.

A seal or gasket does not establish an IP rating by itself. Apply a sealing or protection rating only when it is specified for the complete connector assembly in its fully mated and correctly installed condition.

Separate the Retention Functions

  • Terminal retention: Holds each contact inside its housing cavity.
  • TPA or secondary lock: Confirms and reinforces terminal seating.
  • CPA: Confirms that the two connector housings are fully mated.
  • Wedge lock: Retains or positions contacts in specified connector families.
  • Panel retainer: Secures the connector housing to its mounting feature.
  • Strain relief: Reduces cable force and bending at the wire termination.

For more detail on housings, terminals, seals, TPA/CPA components and connector assembly records, see the Wiring Harness Connector Types guide.

Complete the Accessory BOM

Record the main housing, mating connector, contacts, seals, locks, backshell or strain-relief parts, mounting hardware and required tooling. Include the quantity of every accessory; one connector may need multiple individual wire seals, cavity plugs and retention components.

If the complete connector type or connection path has not yet been selected, return to Rectangular Connectors before finalizing the accessory list.

Read More
Connectors AccessoriesResults:
Comprehensive
Price Priority
Stock Priority
Image
Part Number
Description
Availability
Unit Price(USD)
Quantity
Operation
Strain Relief for Ribbon Cable Connector, Glass Filled Polyester, Std & Heavy Duty, 6-50 Pins
Available Stock
1,605
Estimated Ship Time:6-13 working days
1+$1.8515
10+$1.495
500+$1.0238
1,000+$0.9396
- +
Ext. Price(USD):$14.81
MOQ:8
Mult:1
SPQ:1
Connector Cap (Cover), Front, AMPMODU MT Series, 16-Pin
Available Stock
1,293
Estimated Ship Time:6-13 working days
1+$2.99
10+$2.5415
25+$1.804
100+$1.6956
250+$1.62
- +
Ext. Price(USD):$14.95
MOQ:5
Mult:1
SPQ:1
Harwin
ECAD Model:
Nut, Datamate Series, TH Mount
Available Stock
59,854
Estimated Ship Time:9-14 working days
12+$1.233
36+$1.1403
1,008+$0.9012
2,508+$0.8451
- +
Ext. Price(USD):$27.12
MOQ:22
Mult:1
SPQ:1
Plug, Sealing EconoSeal Series, Adhesive Mount
Available Stock
19,857
Estimated Ship Time:6-13 working days
25+$0.4508
100+$0.3894
5,000+$0.2635
10,000+$0.2592
- +
Ext. Price(USD):$14.42
MOQ:32
Mult:1
SPQ:1
Amphenol
ECAD Model:
Connector 12-Pin Boot ATM Series
Available Stock
306
Estimated Ship Time:6-13 working days
1+$2.1505
10+$1.8285
2,700+$1.0476
5,100+$1.0271
- +
Ext. Price(USD):$15.05
MOQ:7
Mult:1
SPQ:1
Molex
ECAD Model:
3-Pin Wedgelock ML-XT 93445 Housings
Available Stock
35,630
Estimated Ship Time:7-9 working days
18+
477+$0.1221
5,000+$0.1166
11,000+$0.1122
27,000+$0.1089
- +
Ext. Price(USD):$58.24
MOQ:477
Mult:1
SPQ:1
Polarizing Device (Key, Plug, Post) Square Post Contacts 0.025" (0.64mm) (AMP MODU)
Available Stock
473,750
Estimated Ship Time:6-13 working days
25+$0.2852
100+$0.2714
6,000+$0.1825
10,000+$0.1771
- +
Ext. Price(USD):$14.26
MOQ:50
Mult:1
SPQ:1
Polyester PCB Connector Covers: 2.54mm Strain Relief, Dust Protection, MTA 100
Available Stock
360
Estimated Ship Time:6-13 working days
10+$0.3899
100+$0.3718
5,000+$0.2203
10,000+$0.2117
- +
Ext. Price(USD):$14.03
MOQ:36
Mult:1
SPQ:1
Molex
ECAD Model:
14-Pin TPA Micro-Fit+ Connector 206461
Available Stock
2,038
Estimated Ship Time:6-13 working days
25+$0.2783
100+$0.2565
5,000+$0.1642
10,000+$0.162
- +
Ext. Price(USD):$14.19
MOQ:51
Mult:1
SPQ:1
Harwin
ECAD Model:
10-Pin Backshell, Gecko Series
Available Stock
199
Estimated Ship Time:9-14 working days
1+$130.4748
10+$110.9117
25+$103.9738
50+$99.0176
100+$94.2991
- +
Ext. Price(USD):$130.47
MOQ:1
Mult:1
SPQ:1
3M
ECAD Model:
Ejector Latch, Short, 810 Series
Available Stock
137
Estimated Ship Time:6-13 working days
1+$1.679
10+$1.426
2,600+$0.8251
5,000+$0.8014
- +
Ext. Price(USD):$15.11
MOQ:9
Mult:1
SPQ:1
Adapter Universal MATE-N-LOK Series 16mm L
Available Stock
8,400
Estimated Ship Time:7-9 working days
21+
800+$0.143
2,000+$0.1408
3,900+$0.1375
7,700+$0.1353
- +
Ext. Price(USD):$114.40
MOQ:800
Mult:1
SPQ:1
Harwin
ECAD Model:
16-Pin Backshell, Datamate J-Tek, Datamate Mix-Tek
Available Stock
115
Estimated Ship Time:9-14 working days
1+$71.1936
10+$60.5113
30+$56.0002
50+$54.0194
100+$51.4442
- +
Ext. Price(USD):$71.19
MOQ:1
Mult:1
SPQ:1
10-Pin Grounding Block, Board Mount
Available Stock
16
Estimated Ship Time:6-13 working days
1+$109.944
20+$109.9332
- +
Ext. Price(USD):$109.94
MOQ:1
Mult:1
SPQ:1
Polyester PCB Connector Covers: 2.54mm Strain Relief, Dust Protection, MTA 100
Available Stock
790
Estimated Ship Time:5-12 working days
100+$0.2441
1,000+$0.18
50,000+$0.1167
100,000+$0.1165
- +
Ext. Price(USD):$30.02
MOQ:123
Mult:1
SPQ:1
TE Connectivity Screw Terminal, AMPLIMITE Series, For Plug
Available Stock
7,626
Estimated Ship Time:6-13 working days
1+$2.714
10+$2.3345
1,000+$1.5552
2,500+$1.5228
- +
Ext. Price(USD):$16.28
MOQ:6
Mult:1
SPQ:1
Molex
ECAD Model:
Available Stock
22,864
Estimated Ship Time:6-13 working days
25+$0.4589
100+$0.396
5,000+$0.2678
10,000+$0.2549
- +
Ext. Price(USD):$14.22
MOQ:31
Mult:1
SPQ:1
10pin Taper Block 53 Series Taper Pins Adhesive Mount 15.49mm H
Available Stock
50
Estimated Ship Time:7-9 working days
11+
1+$124.608
3+$122.298
5+$119.999
9+$117.689
- +
Ext. Price(USD):$124.60
MOQ:1
Mult:1
SPQ:1
2-Pin Cap Cover, Strain Relief, 9176 Series, 8mm L × 6.3mm H
Available Stock
4,595
Estimated Ship Time:6-13 working days
25+$0.4848
100+$0.4186
5,000+$0.2825
10,000+$0.2678
- +
Ext. Price(USD):$26.66
MOQ:55
Mult:1
SPQ:1
28-Pin Terminal Position Assurance (TPA) Economy Power Housings
Available Stock
10,609
Estimated Ship Time:7-9 working days
14+
950+$0.1166
2,400+$0.1144
4,800+$0.1122
9,500+$0.11
- +
Ext. Price(USD):$110.77
MOQ:950
Mult:1
SPQ:1
AMPSEAL 16 Connector Tail, High Protection, Direct or 90° Wire Exit, Fits Corrugated or Sheathed Cable
Available Stock
1,000
Estimated Ship Time:7-9 working days
26+
150+$0.814
400+$0.715
4,000+$0.605
10,000+$0.528
- +
Ext. Price(USD):$122.10
MOQ:150
Mult:1
SPQ:1
8-Pin PCB Frame DuoPlug Mark II PCB Connector, PCB Mount, 25.5mm L × 15mm H
Available Stock
241,311
Estimated Ship Time:7-9 working days
16+
700+$0.1617
1,800+$0.1584
3,500+$0.1562
6,900+$0.1529
54,000+$0.1397
- +
Ext. Price(USD):$113.19
MOQ:700
Mult:1
SPQ:1
16-Pin Cap (Cover) 0600 Series Header SMD
Available Stock
139
Estimated Ship Time:6-13 working days
1+$4.163
10+$3.377
1,000+$2.3976
2,500+$2.2464
- +
Ext. Price(USD):$16.65
MOQ:4
Mult:1
SPQ:1
Molex
ECAD Model:
Connector Accessories 2 POS Strain Relief Nylon 6/6 Natural Bulk
Available Stock
15,129
Estimated Ship Time:7-9 working days
26+
93+$1.254
250+$1.232
500+$1.21
950+$1.188
- +
Ext. Price(USD):$116.62
MOQ:93
Mult:1
SPQ:1
50-Pin Cap (Cover) AMPMODU MT Series 63.5mm L
Available Stock
9,576
Estimated Ship Time:7-9 working days
23+
95+$1.177
500+$1.133
2,000+$1.078
3,000+$1.045
9,000+$1.001
- +
Ext. Price(USD):$111.81
MOQ:95
Mult:1
SPQ:1
25 / PageGoto