Connectors Accessories

Results:

Connector accessories complete specific mechanical, retention, sealing and protection functions within a rectangular connector system. This category includes terminal locks, retainers, wedge locks, seals, gaskets and backshells. Start with the main connector manufacturer, series and housing part number, then match the accessory by function, installed position and specified compatibility.

Start with the Missing Function

Identify what the completed connector assembly needs before searching by accessory appearance. One connector system may require several accessories serving different mechanical or environmental roles.

Required function Typical accessories
Prevent terminal back-out TPA, secondary lock or terminal retainer
Secure the mating pair CPA, wedge lock, latch or locking component
Seal the interface Interface seal, wire seal, gasket or cavity plug
Protect the cable exit Backshell, boot or strain-relief component
Support mounting or routing Bracket, clip, housing retainer or wire guide
Protect an unmated interface Dust cap or protective cover

Use the Main Connector as the Compatibility Key

Manufacturer → Product series → Housing part number → Plug or receptacle side → Accessory part number

Confirm the accessory in the manufacturer’s product drawing, application specification or accessory table. Continue checking positions, housing or shell size, orientation and product revision even when two components share the same series name. If the main connector body has not been selected, begin with Rectangular Connector Housings.

Match the Installed Position

Installation point Compatibility checks
Contact cavity Terminal size, locking lance, TPA orientation and insertion sequence
Mating interface Positions, keying, interface seal and connector side
Wire entry Wire gauge, insulation diameter and individual wire seal
Rear of housing Straight or right-angle exit, backshell size and cable clearance
Panel or enclosure Gasket, bracket, clip, mounting feature and panel thickness
Unused cavity or open face Cavity plug, dust cap and required environmental protection

Terminal locks and retainers must also match the conductive parts installed in the housing. Browse Rectangular Connector Contacts for compatible pins, sockets and crimp terminals.

Build the Complete Sealing System

Environmental protection can depend on several coordinated components: the sealed housing, mating-interface seal, individual wire seals, cavity plugs for unused positions, and any specified backshell or boot. Match each wire seal to the permitted insulation diameter and install every component in the manufacturer’s stated sequence.

A seal or gasket does not establish an IP rating by itself. Apply a sealing or protection rating only when it is specified for the complete connector assembly in its fully mated and correctly installed condition.

Separate the Retention Functions

  • Terminal retention: Holds each contact inside its housing cavity.
  • TPA or secondary lock: Confirms and reinforces terminal seating.
  • CPA: Confirms that the two connector housings are fully mated.
  • Wedge lock: Retains or positions contacts in specified connector families.
  • Panel retainer: Secures the connector housing to its mounting feature.
  • Strain relief: Reduces cable force and bending at the wire termination.

For more detail on housings, terminals, seals, TPA/CPA components and connector assembly records, see the Wiring Harness Connector Types guide.

Complete the Accessory BOM

Record the main housing, mating connector, contacts, seals, locks, backshell or strain-relief parts, mounting hardware and required tooling. Include the quantity of every accessory; one connector may need multiple individual wire seals, cavity plugs and retention components.

If the complete connector type or connection path has not yet been selected, return to Rectangular Connectors before finalizing the accessory list.

Read More
Connectors AccessoriesResults:
Comprehensive
Price Priority
Stock Priority
Image
Part Number
Description
Availability
Unit Price(USD)
Quantity
Operation
Clip, Burner Heavy Duty Burner Connectors
Available Stock
860
Estimated Ship Time:7-9 working days
18+
75+$1.507
200+$1.474
400+$1.452
750+$1.419
- +
Ext. Price(USD):$113.02
MOQ:75
Mult:1
SPQ:1
Molex
ECAD Model:
24-Pin Shroud C-Grid SL Series, Wire Mount, 77.31mm L × 8.12mm H
Available Stock
600
Estimated Ship Time:7-9 working days
21+
100+$2.277
200+$2.244
300+$2.189
600+$2.112
- +
Ext. Price(USD):$227.70
MOQ:100
Mult:1
SPQ:1
ITT Cannon D-Sub Shell, TSTRECT Series, 2-Pin, ABS Housing, Straight Out
Available Stock
763
Estimated Ship Time:7-10 working days
20+
30+$1.87
100+$1.727
200+$1.408
500+$1.188
- +
Ext. Price(USD):$56.10
MOQ:30
Mult:1
SPQ:1
60-Pin Cap (Cover), Front AMPMODU MT Series
Available Stock
2,982
Estimated Ship Time:5-12 working days
5+$5.612
25+$5.126
1,000+$4.4619
2,500+$4.3228
- +
Ext. Price(USD):$33.67
MOQ:6
Mult:1
SPQ:1
Backshell
Available Stock
12
Estimated Ship Time:7-9 working days
15+
1+$886.688
2+$870.848
- +
Ext. Price(USD):$886.68
MOQ:1
Mult:1
SPQ:1
Polarizing Device (Key, Plug, Post), AMPMODU Mod II & IV Series
Available Stock
18,431
Estimated Ship Time:6-13 working days
10+$0.8027
25+$0.7165
5,000+$0.4514
10,000+$0.4439
- +
Ext. Price(USD):$14.44
MOQ:18
Mult:1
SPQ:1
Coding Key
Available Stock
25
Estimated Ship Time:9-14 working days
5+$33.048
10+$31.3956
1,000+$25.5725
10,000+$24.2936
- +
Ext. Price(USD):$165.24
MOQ:5
Mult:5
SPQ:1
Molex
Package:-
ECAD Model:
Molex Terminal Position Assurance for use with
Available Stock
90,550
Estimated Ship Time:6-13 working days
25+$0.1369
100+$0.13
4,500+$0.095
9,000+$0.0896
- +
Ext. Price(USD):$14.04
MOQ:108
Mult:1
SPQ:1
Molex
ECAD Model:
44-Pin Shroud, C-Grid, SL Series
Available Stock
51
Estimated Ship Time:9-14 working days
50+$18.5998
100+$18.2278
500+$17.8633
1,000+$17.506
5,000+$17.1559
- +
Ext. Price(USD):$929.99
MOQ:50
Mult:50
SPQ:1
Molex
ECAD Model:
12-Pin Cable Holder for Ribbon Cables Wire Mount 3.8mm H
Available Stock
7,600
Estimated Ship Time:7-9 working days
20+
500+$0.1243
2,400+$0.1221
4,700+$0.1199
- +
Ext. Price(USD):$62.15
MOQ:500
Mult:1
SPQ:1
20-Pin Panel Mount Frame PQ50 Series
Available Stock
50
Estimated Ship Time:9-14 working days
1+$19.1052
10+$16.2367
250+$12.9386
500+$12.3217
- +
Ext. Price(USD):$38.21
MOQ:2
Mult:1
SPQ:1
Molex
ECAD Model:
6-Pin Backshell, MX150 Series
Available Stock
200
Estimated Ship Time:9-14 working days
80+$2.2248
- +
Ext. Price(USD):$177.98
MOQ:80
Mult:80
SPQ:1
2pin Cable Clamp ePower Series Clip Mount, Wire Mount
Available Stock
6
Estimated Ship Time:9-14 working days
1+$16.8912
10+$14.3521
100+$12.1999
250+$12.1913
- +
Ext. Price(USD):$33.78
MOQ:2
Mult:1
SPQ:1
Molex
ECAD Model:
Molex Connector Retainer, For 172708/172762/172767/200453/200471 Mini-Fit TPA2 Housing
Available Stock
9,700
Estimated Ship Time:7-9 working days
19+
1,100+$0.1177
3,300+$0.1155
5,500+$0.1133
8,800+$0.1089
- +
Ext. Price(USD):$129.47
MOQ:1,100
Mult:1
SPQ:1
Molex
ECAD Model:
Molex Rear Cover, Mega-Fit Series, For 171692 Mega-Fit Socket Housing
Available Stock
460
Estimated Ship Time:7-10 working days
25+
186+$0.627
500+$0.616
880+$0.583
2,000+$0.517
5,000+$0.506
- +
Ext. Price(USD):$116.62
MOQ:186
Mult:1
SPQ:1
60-Pin Strain Relief
Available Stock
400
Estimated Ship Time:9-14 working days
300+$0.3035
- +
Ext. Price(USD):$91.05
MOQ:300
Mult:300
SPQ:1
Molex
ECAD Model:
2-Pin Backshell, MX150 Series
Available Stock
546
Estimated Ship Time:9-14 working days
1+$4.8708
10+$4.1364
100+$3.5157
250+$3.2956
- +
Ext. Price(USD):$29.22
MOQ:6
Mult:1
SPQ:1
4-Pin Terminal Position Assurance (TPA) Val-U-Lok Housings
Available Stock
5,500
Estimated Ship Time:7-9 working days
23+
642+$0.1716
2,800+$0.1716
25,000+$0.132
50,000+$0.121
- +
Ext. Price(USD):$110.16
MOQ:642
Mult:1
SPQ:1
Boot
Available Stock
3,372
Estimated Ship Time:6-13 working days
1+$2.76
10+$2.415
2,500+$1.404
5,000+$1.3284
- +
Ext. Price(USD):$16.56
MOQ:6
Mult:1
SPQ:1
3M
ECAD Model:
8-Pin Strain Relief 3000 Series
Available Stock
100
Estimated Ship Time:9-14 working days
50+$0.4843
100+$0.4612
1,000+$0.3919
2,500+$0.3674
- +
Ext. Price(USD):$26.15
MOQ:54
Mult:1
SPQ:1
30-Pin Connector Holder CT Series Base Mount
Available Stock
6,790
Estimated Ship Time:9-14 working days
25+$0.651
50+$0.5149
1,000+$0.4168
3,000+$0.3857
- +
Ext. Price(USD):$26.25
MOQ:51
Mult:1
SPQ:1
12-Pin Retainer, DTM Series, Fixed Mount
Available Stock
3,459
Estimated Ship Time:6-13 working days
1+$1.6215
10+$1.403
2,500+$0.8316
5,000+$0.8122
- +
Ext. Price(USD):$14.59
MOQ:9
Mult:1
SPQ:1
Seal
Available Stock
7,185
Estimated Ship Time:6-13 working days
25+$0.322
100+$0.3003
250+$0.2827
1,000+$0.2549
2,500+$0.2441
- +
Ext. Price(USD):$14.16
MOQ:44
Mult:1
SPQ:1
1-Pin Adapter, Mounting
Available Stock
2,433
Estimated Ship Time:9-14 working days
1+$9.9576
10+$8.4661
500+$6.4238
1,000+$6.1175
- +
Ext. Price(USD):$29.87
MOQ:3
Mult:1
SPQ:1
23-Pin Strain Relief AMPSEAL Connector
Available Stock
1,346
Estimated Ship Time:5-12 working days
25+$1.5525
250+$1.309
500+$1.2305
1,000+$1.2198
- +
Ext. Price(USD):$38.81
MOQ:25
Mult:1
SPQ:1
25 / PageGoto