Connectors Accessories

Results:

Connector accessories complete specific mechanical, retention, sealing and protection functions within a rectangular connector system. This category includes terminal locks, retainers, wedge locks, seals, gaskets and backshells. Start with the main connector manufacturer, series and housing part number, then match the accessory by function, installed position and specified compatibility.

Start with the Missing Function

Identify what the completed connector assembly needs before searching by accessory appearance. One connector system may require several accessories serving different mechanical or environmental roles.

Required function Typical accessories
Prevent terminal back-out TPA, secondary lock or terminal retainer
Secure the mating pair CPA, wedge lock, latch or locking component
Seal the interface Interface seal, wire seal, gasket or cavity plug
Protect the cable exit Backshell, boot or strain-relief component
Support mounting or routing Bracket, clip, housing retainer or wire guide
Protect an unmated interface Dust cap or protective cover

Use the Main Connector as the Compatibility Key

Manufacturer → Product series → Housing part number → Plug or receptacle side → Accessory part number

Confirm the accessory in the manufacturer’s product drawing, application specification or accessory table. Continue checking positions, housing or shell size, orientation and product revision even when two components share the same series name. If the main connector body has not been selected, begin with Rectangular Connector Housings.

Match the Installed Position

Installation point Compatibility checks
Contact cavity Terminal size, locking lance, TPA orientation and insertion sequence
Mating interface Positions, keying, interface seal and connector side
Wire entry Wire gauge, insulation diameter and individual wire seal
Rear of housing Straight or right-angle exit, backshell size and cable clearance
Panel or enclosure Gasket, bracket, clip, mounting feature and panel thickness
Unused cavity or open face Cavity plug, dust cap and required environmental protection

Terminal locks and retainers must also match the conductive parts installed in the housing. Browse Rectangular Connector Contacts for compatible pins, sockets and crimp terminals.

Build the Complete Sealing System

Environmental protection can depend on several coordinated components: the sealed housing, mating-interface seal, individual wire seals, cavity plugs for unused positions, and any specified backshell or boot. Match each wire seal to the permitted insulation diameter and install every component in the manufacturer’s stated sequence.

A seal or gasket does not establish an IP rating by itself. Apply a sealing or protection rating only when it is specified for the complete connector assembly in its fully mated and correctly installed condition.

Separate the Retention Functions

  • Terminal retention: Holds each contact inside its housing cavity.
  • TPA or secondary lock: Confirms and reinforces terminal seating.
  • CPA: Confirms that the two connector housings are fully mated.
  • Wedge lock: Retains or positions contacts in specified connector families.
  • Panel retainer: Secures the connector housing to its mounting feature.
  • Strain relief: Reduces cable force and bending at the wire termination.

For more detail on housings, terminals, seals, TPA/CPA components and connector assembly records, see the Wiring Harness Connector Types guide.

Complete the Accessory BOM

Record the main housing, mating connector, contacts, seals, locks, backshell or strain-relief parts, mounting hardware and required tooling. Include the quantity of every accessory; one connector may need multiple individual wire seals, cavity plugs and retention components.

If the complete connector type or connection path has not yet been selected, return to Rectangular Connectors before finalizing the accessory list.

Read More
Connectors AccessoriesResults:
Comprehensive
Price Priority
Stock Priority
Image
Part Number
Description
Availability
Unit Price(USD)
Quantity
Operation
U-Clip for LEAVYSEAL Connectors, Fits 15/21/22/26/39/62 Pos
Available Stock
668
Estimated Ship Time:7-9 working days
24+
150+$0.968
300+$0.946
600+$0.891
- +
Ext. Price(USD):$145.20
MOQ:150
Mult:1
SPQ:1
Bracket Sumicon 1600 Series 24-Pin Bracket Mount
Available Stock
51
Estimated Ship Time:6-13 working days
1+$3.2545
10+$2.827
1,000+$1.9548
2,500+$1.9008
- +
Ext. Price(USD):$16.27
MOQ:5
Mult:1
SPQ:1
12-Pin Strain Relief Omnimate RSV Series
Available Stock
4
Estimated Ship Time:6-13 working days
1+$20.999
10+$13.8996
100+$9.8064
250+$9.5256
- +
Ext. Price(USD):$20.99
MOQ:1
Mult:1
SPQ:1
Polarizing Device (Key, Plug, Post) Box Series, 7.75mm L × 4.42mm H
Available Stock
803
Estimated Ship Time:5-12 working days
1+$28.2785
25+$24.6528
225+$19.688
300+$19.3028
- +
Ext. Price(USD):$56.55
MOQ:2
Mult:1
SPQ:1
Strain Relief for Ribbon Cable Connector, Glass Filled Polyester, Std & Heavy Duty, 6-50 Pins
Available Stock
900
Estimated Ship Time:7-10 working days
26+
150+$0.891
8,000+$0.891
10,000+$0.858
- +
Ext. Price(USD):$133.65
MOQ:150
Mult:50
SPQ:50
Harwin
ECAD Model:
Datamate J-Tek/Datamate Mix-Tek 14-Pin Backshell
Available Stock
15
Estimated Ship Time:9-14 working days
1+$143.1432
10+$121.6771
25+$114.0661
50+$108.629
100+$103.452
- +
Ext. Price(USD):$143.14
MOQ:1
Mult:1
SPQ:1
Molex
ECAD Model:
65-Pin Cap, Wire CMX Series 33.9mm L × 45.8mm H
Available Stock
51,207
Estimated Ship Time:7-9 working days
18+
264+$0.2211
3,000+$0.2134
6,000+$0.2046
15,000+$0.1958
47,000+$0.1892
- +
Ext. Price(USD):$58.37
MOQ:264
Mult:1
SPQ:1
34-Pin Backshell HIF3 Series
Available Stock
37
Estimated Ship Time:6-13 working days
1+$15.571
10+$11.8692
200+$9.8928
500+$9.666
- +
Ext. Price(USD):$15.57
MOQ:1
Mult:1
SPQ:1
Molex
ECAD Model:
2pin Wedgelock ML-XT 93444 Housings
Available Stock
16,905
Estimated Ship Time:7-9 working days
19+
715+$0.0814
8,000+$0.0781
16,000+$0.0748
- +
Ext. Price(USD):$58.20
MOQ:715
Mult:1
SPQ:1
Strain Relief for Ribbon Cable Connector, Glass Filled Polyester, Std & Heavy Duty, 6-50 Pins
Available Stock
163
Estimated Ship Time:6-13 working days
1+$3.381
10+$2.829
2,500+$1.7928
5,000+$1.674
- +
Ext. Price(USD):$16.90
MOQ:5
Mult:1
SPQ:1
20-Pin Terminal Position Assurance (TPA) Economy Power Housings
Available Stock
6,850
Estimated Ship Time:7-9 working days
14+
1,200+$0.1177
2,400+$0.1155
4,800+$0.1133
- +
Ext. Price(USD):$141.24
MOQ:1,200
Mult:400
SPQ:400
5-Pin Terminal Position Assurance (TPA) Economy Power Series
Available Stock
1,150
Estimated Ship Time:5-12 working days
1,150+$0.1023
3,450+$0.1005
100,050+$0.062
150,650+$0.0615
- +
Ext. Price(USD):$117.64
MOQ:1,150
Mult:1,150
SPQ:1,150
Cap (Cover), Protective, ATM Series, 6-Pin
Available Stock
400
Estimated Ship Time:5-10 working days
1+$2.2293
10+$2.0458
25+$1.8482
- +
Ext. Price(USD):$6.68
MOQ:3
Mult:1
4-Pin Holder HVH-280 Series Thread Mount 18.2mm × 10.75mm × 10.75mm
Available Stock
1,645
Estimated Ship Time:6-13 working days
10+$0.6969
25+$0.6222
5,000+$0.4234
10,000+$0.4126
- +
Ext. Price(USD):$14.63
MOQ:21
Mult:1
SPQ:1
Molex
ECAD Model:
4-Pin Cable Holder, Ribbon Cables, Wire Mount, 3.8mm H
Available Stock
93,953
Estimated Ship Time:7-9 working days
19+
4,000+$0.0147
22,000+$0.0135
47,000+$0.0125
- +
Ext. Price(USD):$58.80
MOQ:4,000
Mult:1
SPQ:1
ITT Cannon
ECAD Model:
Connector, 6-Pin, Wedgelock IT Series
Available Stock
4,981
Estimated Ship Time:9-14 working days
100+$0.1958
250+$0.1835
500+$0.1747
1,000+$0.1664
2,500+$0.156
- +
Ext. Price(USD):$26.04
MOQ:133
Mult:1
SPQ:1
26-Pin Cap (Cover), Front, AMPMODU MT Series
Available Stock
349
Estimated Ship Time:5-12 working days
25+$3.7072
250+$3.531
3,000+$1.3054
4,000+$1.284
- +
Ext. Price(USD):$92.68
MOQ:25
Mult:1
SPQ:1
Molex
ECAD Model:
26-Pin Shroud, C-Grid SL Series, Clip Mount, Free Hanging
Available Stock
634
Estimated Ship Time:9-14 working days
10+$2.3965
25+$2.2464
250+$1.9091
500+$1.8179
- +
Ext. Price(USD):$26.36
MOQ:11
Mult:1
SPQ:1
Hardware Kit AMPMODU Mod II Series
Available Stock
153
Estimated Ship Time:9-14 working days
1+$7.644
5+$5.8817
10+$5.6916
25+$5.4505
- +
Ext. Price(USD):$30.57
MOQ:4
Mult:1
SPQ:1
Mounting Base DMC-M Inserts base mount,Bracket mounting,panel mount
Available Stock
28
Estimated Ship Time:9-14 working days
2+$765.9414
10+$750.6227
50+$735.61
100+$720.8977
500+$706.4798
- +
Ext. Price(USD):$1,531.88
MOQ:2
Mult:2
SPQ:1
2-Pin Strain Relief, Quadrax Series
Available Stock
651
Estimated Ship Time:7-9 working days
20+
15+$8.668
35+$8.514
65+$8.349
150+$8.195
- +
Ext. Price(USD):$130.02
MOQ:15
Mult:1
SPQ:1
Assembly Module 12-Pin MATE-N-LOK Series 26.67mm L
Available Stock
122
Estimated Ship Time:5-12 working days
25+$2.5312
250+$2.4075
- +
Ext. Price(USD):$63.28
MOQ:25
Mult:1
SPQ:1
Amphenol
ECAD Model:
Socket Wedge, 4-Pin, ATP Series
Available Stock
588
Estimated Ship Time:6-13 working days
25+$0.4612
100+$0.4092
5,500+$0.2776
10,450+$0.27
- +
Ext. Price(USD):$14.29
MOQ:31
Mult:1
SPQ:1
Amphenol
ECAD Model:
40-Pin Boot, ARC Series, 123.3mm L
Available Stock
179
Estimated Ship Time:6-13 working days
1+$4.117
10+$3.344
1,080+$2.1492
2,520+$2.0736
- +
Ext. Price(USD):$16.46
MOQ:4
Mult:1
SPQ:1
11-Pin Frame DuoPlug Mark II PCB Connector
Available Stock
28,620
Estimated Ship Time:7-9 working days
24+
250+$0.506
550+$0.495
3,000+$0.462
25,000+$0.407
- +
Ext. Price(USD):$126.50
MOQ:250
Mult:1
SPQ:1
25 / PageGoto