Connectors Accessories

Results:

Connector accessories complete specific mechanical, retention, sealing and protection functions within a rectangular connector system. This category includes terminal locks, retainers, wedge locks, seals, gaskets and backshells. Start with the main connector manufacturer, series and housing part number, then match the accessory by function, installed position and specified compatibility.

Start with the Missing Function

Identify what the completed connector assembly needs before searching by accessory appearance. One connector system may require several accessories serving different mechanical or environmental roles.

Required function Typical accessories
Prevent terminal back-out TPA, secondary lock or terminal retainer
Secure the mating pair CPA, wedge lock, latch or locking component
Seal the interface Interface seal, wire seal, gasket or cavity plug
Protect the cable exit Backshell, boot or strain-relief component
Support mounting or routing Bracket, clip, housing retainer or wire guide
Protect an unmated interface Dust cap or protective cover

Use the Main Connector as the Compatibility Key

Manufacturer → Product series → Housing part number → Plug or receptacle side → Accessory part number

Confirm the accessory in the manufacturer’s product drawing, application specification or accessory table. Continue checking positions, housing or shell size, orientation and product revision even when two components share the same series name. If the main connector body has not been selected, begin with Rectangular Connector Housings.

Match the Installed Position

Installation point Compatibility checks
Contact cavity Terminal size, locking lance, TPA orientation and insertion sequence
Mating interface Positions, keying, interface seal and connector side
Wire entry Wire gauge, insulation diameter and individual wire seal
Rear of housing Straight or right-angle exit, backshell size and cable clearance
Panel or enclosure Gasket, bracket, clip, mounting feature and panel thickness
Unused cavity or open face Cavity plug, dust cap and required environmental protection

Terminal locks and retainers must also match the conductive parts installed in the housing. Browse Rectangular Connector Contacts for compatible pins, sockets and crimp terminals.

Build the Complete Sealing System

Environmental protection can depend on several coordinated components: the sealed housing, mating-interface seal, individual wire seals, cavity plugs for unused positions, and any specified backshell or boot. Match each wire seal to the permitted insulation diameter and install every component in the manufacturer’s stated sequence.

A seal or gasket does not establish an IP rating by itself. Apply a sealing or protection rating only when it is specified for the complete connector assembly in its fully mated and correctly installed condition.

Separate the Retention Functions

  • Terminal retention: Holds each contact inside its housing cavity.
  • TPA or secondary lock: Confirms and reinforces terminal seating.
  • CPA: Confirms that the two connector housings are fully mated.
  • Wedge lock: Retains or positions contacts in specified connector families.
  • Panel retainer: Secures the connector housing to its mounting feature.
  • Strain relief: Reduces cable force and bending at the wire termination.

For more detail on housings, terminals, seals, TPA/CPA components and connector assembly records, see the Wiring Harness Connector Types guide.

Complete the Accessory BOM

Record the main housing, mating connector, contacts, seals, locks, backshell or strain-relief parts, mounting hardware and required tooling. Include the quantity of every accessory; one connector may need multiple individual wire seals, cavity plugs and retention components.

If the complete connector type or connection path has not yet been selected, return to Rectangular Connectors before finalizing the accessory list.

Read More
Connectors AccessoriesResults:
Comprehensive
Price Priority
Stock Priority
Image
Part Number
Description
Availability
Unit Price(USD)
Quantity
Operation
Amphenol
ECAD Model:
26-Pin Strain Relief, Quickie™ Series
Available Stock
13,500
Estimated Ship Time:7-9 working days
25+
378+$0.2915
6,750+$0.2915
13,500+$0.2563
- +
Ext. Price(USD):$110.18
MOQ:378
Mult:1
SPQ:1
12-Pin TPA Economy Power Housing 29.4mm × 2.5146mm H
Available Stock
5,962
Estimated Ship Time:7-9 working days
15+
1,200+$0.099
3,000+$0.0968
6,000+$0.0946
- +
Ext. Price(USD):$118.80
MOQ:1,200
Mult:600
SPQ:600
2-Pin Retainer, Fixed Mount
Available Stock
2,886
Estimated Ship Time:9-14 working days
10+$1.2949
25+$1.2139
1,000+$0.9353
2,500+$0.8768
- +
Ext. Price(USD):$27.19
MOQ:21
Mult:1
SPQ:1
Amphenol
ECAD Model:
40-Pin Strain Relief, Quickie™ Series
Available Stock
540
Estimated Ship Time:7-10 working days
22+
80+$1.452
250+$1.221
500+$1.144
1,100+$1.089
4,400+$0.902
- +
Ext. Price(USD):$116.16
MOQ:80
Mult:1
SPQ:1
Amphenol
ECAD Model:
12-Pin Boot AT Series™
Available Stock
145
Estimated Ship Time:6-13 working days
1+$1.5985
10+$1.3685
2,600+$0.7949
5,000+$0.7765
- +
Ext. Price(USD):$15.05
MOQ:11
Mult:1
SPQ:1
Ferrule SMB Connector SMD 9.3mm L
Available Stock
9,365
Estimated Ship Time:6-13 working days
25+$0.3531
100+$0.3168
5,000+$0.2473
10,000+$0.2225
- +
Ext. Price(USD):$14.12
MOQ:40
Mult:1
SPQ:1
Heavy Duty Sealed Connector Clamps for Installation; Fits All Connector Housing Sizes; No Hardware or Tools Required
Available Stock
17,027
Estimated Ship Time:7-10 working days
22+
450+$0.2607
1,100+$0.2563
1,200+$0.2409
4,000+$0.2299
- +
Ext. Price(USD):$117.31
MOQ:450
Mult:1
SPQ:1
Sumicon 1600 Series Connector, 28-Pin, Bracket Mount
Available Stock
186
Estimated Ship Time:6-13 working days
1+$2.944
10+$2.576
2,500+$1.512
5,000+$1.4796
- +
Ext. Price(USD):$14.72
MOQ:5
Mult:1
SPQ:1
Amphenol
ECAD Model:
40-Pin Strain Relief, Quickie™ Series
Available Stock
180
Estimated Ship Time:5-12 working days
100+$0.7317
1,000+$0.6972
12,150+$0.2585
16,200+$0.2533
- +
Ext. Price(USD):$73.17
MOQ:100
Mult:1
SPQ:180
HARTING
ECAD Model:
Connector Cover, DIN Rail Mount, For PCB Connectors
Available Stock
109
Estimated Ship Time:5-10 working days
1+$1.2109
10+$1.1727
100+$1.1217
- +
Ext. Price(USD):$7.26
MOQ:6
Mult:1
Connector, Type: Accessories
Available Stock
167
Estimated Ship Time:7-9 working days
18+
30+$3.96
70+$3.883
150+$3.817
- +
Ext. Price(USD):$118.80
MOQ:30
Mult:1
SPQ:1
Cable Clamp MTC Series, Bracket Mount, Wire Mount
Available Stock
28
Estimated Ship Time:9-14 working days
5+$258.0055
10+$252.8453
50+$247.7879
100+$242.8322
500+$237.9755
- +
Ext. Price(USD):$1,290.02
MOQ:5
Mult:5
SPQ:1
Samtec
ECAD Model:
Cap Cover 40-Pin
Available Stock
923
Estimated Ship Time:6-13 working days
1+$1.9205
50+$1.419
5,000+$0.8154
10,000+$0.783
- +
Ext. Price(USD):$15.36
MOQ:8
Mult:1
SPQ:1
7-Pin TPA Economy Power Housings, Bracket Mount, 7.8mm H
Available Stock
5,608
Estimated Ship Time:5-12 working days
800+$0.1035
3,200+$0.0934
50,400+$0.0896
100,000+$0.0893
- +
Ext. Price(USD):$82.80
MOQ:800
Mult:800
SPQ:800
Molex
ECAD Model:
Molex Backshell 204723 Series For Mini-Fit Jr Plug & Receptacle Housing
Available Stock
27,404
Estimated Ship Time:6-13 working days
10+$0.9235
25+$0.8246
500+$0.5983
5,000+$0.5908
- +
Ext. Price(USD):$14.77
MOQ:16
Mult:1
SPQ:1
20-Pin Cap (Cover), Front AMPMODU MT Series
Available Stock
451
Estimated Ship Time:5-12 working days
10+$1.909
100+$1.705
2,500+$1.5087
5,000+$1.4766
- +
Ext. Price(USD):$30.54
MOQ:16
Mult:1
SPQ:1
Amphenol
ECAD Model:
3-Pin Boot, ATM Series
Available Stock
1,184
Estimated Ship Time:6-13 working days
10+$0.7498
25+$0.7372
2,800+$0.5152
5,200+$0.5108
- +
Ext. Price(USD):$14.24
MOQ:19
Mult:1
SPQ:1
Plug, Sealing DT-XT Series
Available Stock
102
Estimated Ship Time:9-14 working days
100+$10.692
200+$10.4782
500+$10.2686
1,000+$10.0632
5,000+$9.862
- +
Ext. Price(USD):$1,069.20
MOQ:100
Mult:100
SPQ:1
Harwin
ECAD Model:
10-Pin Backshell, Datamate J-Tek, Datamate Mix-Tek
Available Stock
8
Estimated Ship Time:6-13 working days
1+$127.7964
10+$112.1688
25+$105.138
50+$100.1268
- +
Ext. Price(USD):$127.79
MOQ:1
Mult:1
SPQ:1
Deutsch Connector Housing, DT Series, 6 Contacts
Available Stock
2,683
Estimated Ship Time:6-13 working days
1+$5.5315
10+$4.356
900+$3.2616
2,700+$3.0564
- +
Ext. Price(USD):$16.59
MOQ:3
Mult:1
SPQ:1
Molex
ECAD Model:
Connector Accessory, Terminal Position Assurance Retainer, Right Angle, Bag
Available Stock
17,517
Estimated Ship Time:9-14 working days
50+$0.3219
100+$0.2546
1,000+$0.2163
2,500+$0.2028
- +
Ext. Price(USD):$26.22
MOQ:103
Mult:1
SPQ:1
Molex
ECAD Model:
14-Pin Retention Key Mini-Fit Sr Series 24.32mm H
Available Stock
1,939
Estimated Ship Time:7-9 working days
25+
159+$0.737
400+$0.726
10,000+$0.583
20,000+$0.55
- +
Ext. Price(USD):$117.18
MOQ:159
Mult:1
SPQ:1
Shell Connector 48-Pin PQ50S Series
Available Stock
56
Estimated Ship Time:9-14 working days
1+$48.0492
10+$40.8402
120+$34.2762
300+$32.1333
- +
Ext. Price(USD):$48.04
MOQ:1
Mult:1
SPQ:1
9-Pin Cap (Cover), Dust MTA-156 Series, 35.66mm L
Available Stock
1,214
Estimated Ship Time:9-14 working days
50+$0.3516
100+$0.3348
1,000+$0.2846
3,000+$0.2633
- +
Ext. Price(USD):$26.01
MOQ:74
Mult:1
SPQ:1
Amphenol
ECAD Model:
4-Pin Shroud, Mini-PV Series
Available Stock
12,386
Estimated Ship Time:6-13 working days
25+$0.4623
100+$0.4213
5,000+$0.2894
10,000+$0.27
- +
Ext. Price(USD):$14.33
MOQ:31
Mult:1
SPQ:1
25 / PageGoto