Connectors Accessories

Results:

Connector accessories complete specific mechanical, retention, sealing and protection functions within a rectangular connector system. This category includes terminal locks, retainers, wedge locks, seals, gaskets and backshells. Start with the main connector manufacturer, series and housing part number, then match the accessory by function, installed position and specified compatibility.

Start with the Missing Function

Identify what the completed connector assembly needs before searching by accessory appearance. One connector system may require several accessories serving different mechanical or environmental roles.

Required function Typical accessories
Prevent terminal back-out TPA, secondary lock or terminal retainer
Secure the mating pair CPA, wedge lock, latch or locking component
Seal the interface Interface seal, wire seal, gasket or cavity plug
Protect the cable exit Backshell, boot or strain-relief component
Support mounting or routing Bracket, clip, housing retainer or wire guide
Protect an unmated interface Dust cap or protective cover

Use the Main Connector as the Compatibility Key

Manufacturer → Product series → Housing part number → Plug or receptacle side → Accessory part number

Confirm the accessory in the manufacturer’s product drawing, application specification or accessory table. Continue checking positions, housing or shell size, orientation and product revision even when two components share the same series name. If the main connector body has not been selected, begin with Rectangular Connector Housings.

Match the Installed Position

Installation point Compatibility checks
Contact cavity Terminal size, locking lance, TPA orientation and insertion sequence
Mating interface Positions, keying, interface seal and connector side
Wire entry Wire gauge, insulation diameter and individual wire seal
Rear of housing Straight or right-angle exit, backshell size and cable clearance
Panel or enclosure Gasket, bracket, clip, mounting feature and panel thickness
Unused cavity or open face Cavity plug, dust cap and required environmental protection

Terminal locks and retainers must also match the conductive parts installed in the housing. Browse Rectangular Connector Contacts for compatible pins, sockets and crimp terminals.

Build the Complete Sealing System

Environmental protection can depend on several coordinated components: the sealed housing, mating-interface seal, individual wire seals, cavity plugs for unused positions, and any specified backshell or boot. Match each wire seal to the permitted insulation diameter and install every component in the manufacturer’s stated sequence.

A seal or gasket does not establish an IP rating by itself. Apply a sealing or protection rating only when it is specified for the complete connector assembly in its fully mated and correctly installed condition.

Separate the Retention Functions

  • Terminal retention: Holds each contact inside its housing cavity.
  • TPA or secondary lock: Confirms and reinforces terminal seating.
  • CPA: Confirms that the two connector housings are fully mated.
  • Wedge lock: Retains or positions contacts in specified connector families.
  • Panel retainer: Secures the connector housing to its mounting feature.
  • Strain relief: Reduces cable force and bending at the wire termination.

For more detail on housings, terminals, seals, TPA/CPA components and connector assembly records, see the Wiring Harness Connector Types guide.

Complete the Accessory BOM

Record the main housing, mating connector, contacts, seals, locks, backshell or strain-relief parts, mounting hardware and required tooling. Include the quantity of every accessory; one connector may need multiple individual wire seals, cavity plugs and retention components.

If the complete connector type or connection path has not yet been selected, return to Rectangular Connectors before finalizing the accessory list.

Read More
Connectors AccessoriesResults:
Comprehensive
Price Priority
Stock Priority
Image
Part Number
Description
Availability
Unit Price(USD)
Quantity
Operation
5pin Shroud AMPMODU MTE Series
Available Stock
30
Estimated Ship Time:6-13 working days
1+$3.726
10+$3.245
25+$3.069
- +
Ext. Price(USD):$14.90
MOQ:4
Mult:1
SPQ:1
4-Pin Cap (Cover), Dust Commercial MATE-N-LOK Series
Available Stock
6,840
Estimated Ship Time:6-13 working days
25+$0.3496
100+$0.3135
250+$0.2838
1,000+$0.2538
10,000+$0.2084
- +
Ext. Price(USD):$14.33
MOQ:41
Mult:1
SPQ:1
Boot SDL Connectors Wire Mount
Available Stock
270
Estimated Ship Time:6-13 working days
1+$4.278
10+$3.542
1,000+$2.4516
2,500+$2.1168
- +
Ext. Price(USD):$17.11
MOQ:4
Mult:1
SPQ:1
HARTING
ECAD Model:
HARTING PCB Connector, T-Module Connector, For Connectors
Available Stock
76
Estimated Ship Time:5-10 working days
1+$2.3326
10+$2.2561
100+$2.1414
- +
Ext. Price(USD):$6.99
MOQ:3
Mult:1
Harwin
ECAD Model:
Nut Gecko Series Thread Mount
Available Stock
5,289
Estimated Ship Time:9-14 working days
60+$0.4007
108+$0.3844
1,008+$0.3283
2,508+$0.3078
- +
Ext. Price(USD):$26.04
MOQ:65
Mult:1
SPQ:1
Molex
ECAD Model:
34-Pin Strain Relief, Milli-Grid, 8mm H
Available Stock
24,000
Estimated Ship Time:3-4 weeks
25+
15,000+$0.0946
- +
Ext. Price(USD):$1,419.00
MOQ:15,000
Mult:15,000
SPQ:15,000
Dynamic Multi-Enclosure Outside Case, Wire-to-Wire, Metal/Plastic, IP67/IP65 with Glands
Available Stock
219
Estimated Ship Time:9-14 working days
1+$50.4144
20+$40.8008
100+$36.4243
260+$34.0528
- +
Ext. Price(USD):$50.41
MOQ:1
Mult:1
SPQ:1
24-Pin Rail Mounting Adapter Omnimate RSV Series Bracket Mount
Available Stock
30
Estimated Ship Time:9-14 working days
1+$9.288
10+$7.8926
30+$7.3033
- +
Ext. Price(USD):$27.86
MOQ:3
Mult:1
SPQ:1
Backshell/Cable Clamp For Connectors
Available Stock
1
Estimated Ship Time:9-14 working days
1+$167.0004
- +
Ext. Price(USD):$167.00
MOQ:1
Mult:1
SPQ:1
Guide Socket EX Series, Bracket Mount
Available Stock
353
Estimated Ship Time:6-13 working days
1+$12.075
10+$9.812
250+$8.5212
500+$7.3224
- +
Ext. Price(USD):$24.15
MOQ:2
Mult:1
SPQ:1
Molex
ECAD Model:
4-Pin Backshell MultiCat Housings
Available Stock
187
Estimated Ship Time:9-14 working days
1+$3.888
10+$3.2994
2,000+$2.2696
4,000+$2.1614
- +
Ext. Price(USD):$27.21
MOQ:7
Mult:1
SPQ:1
1pin Cap (Cover) 9176 Series
Available Stock
52,567
Estimated Ship Time:6-13 working days
25+$0.2604
100+$0.2436
6,000+$0.1548
10,000+$0.1503
- +
Ext. Price(USD):$26.55
MOQ:109
Mult:1
SPQ:1
Connector 6-Pin Terminal Position Assurance (TPA) Grace Inertia
Available Stock
94,500
Estimated Ship Time:7-9 working days
21+
2,000+$0.0572
4,900+$0.0561
27,000+$0.0528
50,000+$0.0495
- +
Ext. Price(USD):$114.40
MOQ:2,000
Mult:1
SPQ:1
Sumicon 1600 Series Connector, 28-Pin Shell
Available Stock
498
Estimated Ship Time:6-13 working days
1+$23.8855
10+$14.4612
- +
Ext. Price(USD):$23.88
MOQ:1
Mult:1
SPQ:1
Backshell, Nickel, Thermoplastic
Available Stock
75
Estimated Ship Time:9-14 working days
5+$45.9281
10+$43.6309
1,000+$35.5383
10,000+$33.7609
- +
Ext. Price(USD):$229.64
MOQ:5
Mult:5
SPQ:1
Amphenol
ECAD Model:
10-Pin Strain Relief, Quickie Series, 28.08mm L
Available Stock
5,820
Estimated Ship Time:7-10 working days
10+
394+$0.2794
3,060+$0.2794
6,120+$0.2475
- +
Ext. Price(USD):$110.08
MOQ:394
Mult:1
SPQ:1
10-Pin Retainer iBridge Ultra Female Connector
Available Stock
500
Estimated Ship Time:5-12 working days
100+$0.6763
250+$0.6625
1,875+$0.4499
2,500+$0.4411
- +
Ext. Price(USD):$67.63
MOQ:100
Mult:1
SPQ:500
1-Pin TPA Terminal Position Assurance Val-U-Lok Housing
Available Stock
630
Estimated Ship Time:6-13 working days
25+$0.2266
100+$0.2162
5,000+$0.1523
10,000+$0.1447
- +
Ext. Price(USD):$14.04
MOQ:62
Mult:1
SPQ:1
Harwin
ECAD Model:
4pin Backshell Datamate J-Tek
Available Stock
7
Estimated Ship Time:9-14 working days
1+$74.9196
10+$63.6768
25+$59.6929
50+$56.8462
100+$54.1366
- +
Ext. Price(USD):$74.91
MOQ:1
Mult:1
SPQ:1
8-Pin Cap (Cover), Front AMPMODU MT Series 10.16mm L
Available Stock
890
Estimated Ship Time:5-12 working days
25+$1.84
100+$1.683
5,000+$1.4552
7,500+$1.4338
- +
Ext. Price(USD):$46.00
MOQ:25
Mult:1
SPQ:1
8-Pin Cap (Cover) AMPMODU Mod IV Series Board Mount
Available Stock
6,702
Estimated Ship Time:7-9 working days
21+
35+$3.63
80+$3.564
1,000+$3.135
5,000+$2.838
- +
Ext. Price(USD):$127.05
MOQ:35
Mult:1
SPQ:1
8-Pin TPA Grace Inertia Connectors
Available Stock
2,256
Estimated Ship Time:6-13 working days
25+$0.1875
100+$0.1679
3,600+$0.1015
10,800+$0.0832
- +
Ext. Price(USD):$14.06
MOQ:75
Mult:1
SPQ:1
Mounting Base DMC-M Inserts, Panel Mount
Available Stock
51
Estimated Ship Time:6-13 working days
1+$240.5052
10+$141.21
25+$141.102
50+$121.8348
- +
Ext. Price(USD):$240.50
MOQ:1
Mult:1
SPQ:1
9-Pin Assembly Module Universal MATE-N-LOK Series
Available Stock
146
Estimated Ship Time:5-12 working days
25+$0.8729
250+$0.7821
7,500+$0.6837
10,000+$0.6441
- +
Ext. Price(USD):$30.55
MOQ:35
Mult:1
SPQ:1
ITT Cannon Trident Series Socket Terminal, Male Plug, For Trident Circular Connector Housing
Available Stock
2,643
Estimated Ship Time:6-13 working days
10+$1.0661
25+$1.0143
2,500+$0.6221
5,000+$0.6113
- +
Ext. Price(USD):$14.92
MOQ:14
Mult:1
SPQ:1
25 / PageGoto