Other Card Edge Components

Results:

Other card edge components include specialized or supplementary connector products that are not grouped with standard edgeboard connectors, housings, contacts, adapters or accessories. Because products in this category can use different interface and mounting formats, begin with the manufacturer part number and datasheet, identify the actual connector type, and then compare its mating and PCB requirements.

Pass the Part Identity Checkpoint

The category name alone does not define a single connector format. Use the following identification sequence before comparing products or approving a substitute.

1
Capture the Manufacturer Part Number Record the complete part number, manufacturer and product series without removing suffixes.
2
Identify the Actual Connector Type Determine whether the part is a header, socket, card-edge connector or another specialized component.
3
Confirm the Mating Interface Establish whether the product connects to a PCB card edge, another PCB, a cable assembly or a separate connector.
4
Decode the Physical Format Compare positions, rows, pitch, orientation, mounting type and termination method.
5
Verify the Datasheet Confirm the mating drawing, recommended PCB layout, ratings, materials and compatible product series.

Use the Part Number as the Primary Identifier

Product descriptions can be shortened or normalized across distributor databases. The complete manufacturer part number provides the most reliable route to the original drawing and product specification.

Manufacturer + Base Part Number + Prefix and Suffix + Series

Prefixes and suffixes may identify contact finish, packaging, mounting variation, keying or another configuration detail. Compare the complete ordering code when evaluating replacements.

Determine What the Part Connects

Establish the connection path before interpreting positions, pitch or mounting details. Products in this category may serve different interconnection functions.

PCB ↔ PCB
Board connection Confirm the interface on both boards, installed spacing and mating orientation.
PCB ↔ Cable
Wire connection Identify the mating housing, contact system, wire range and termination method.
Card ↔ Host
Card-edge interface Check card thickness, conductive-finger arrangement, insertion geometry and keying.

Decode the Connector Format

Once the product type and mating interface are known, translate the mechanical specification into a comparable set of fields.

Connector type Header, socket, receptacle, card-edge connector or another specified component.
Positions and rows Confirm the total number of electrical positions and how they are distributed across rows.
Pitch Match the center-to-center spacing of contacts or terminals to the mating product and PCB.
Orientation Check straight, vertical, right-angle, top-entry or side-entry configuration as applicable.
Mounting and termination Verify surface mount or through-hole installation and the specified solder or contact termination.

Match the PCB Installation

The connector body may fit the available space while its terminals or recommended footprint remain incompatible with the board. Check the complete installation drawing.

PCB footprint Compare pad or hole locations, terminal pattern, tolerances and keep-out areas.
Installed envelope Check connector height, body width, card approach and surrounding component clearance.
Assembly process Confirm soldering method, mounting hardware, packaging and automated assembly requirements.

Confirm the Mating Component

A compatible pitch and position count do not establish a complete mating match. Use the manufacturer’s drawing or related-products list to verify the opposing connector, housing, contact or PCB interface.

✓ Mating manufacturer part number ✓ Compatible product series ✓ Contact gender and arrangement ✓ Keying and polarization ✓ Engagement and insertion depth ✓ Electrical and temperature ratings

Build a Verifiable Part Identity

Save the identifying and mating information together so that purchasing, engineering and incoming inspection use the same product definition.

Part identity record
Manufacturer + Part number | Connector type | Mating product | Positions × pitch | Mounting

If the required product is already identifiable as a complete edgeboard connector, housing, contact, adapter or accessory, browse Card Edge Connectors & Components to select the corresponding product group.

Read More
Other Card Edge ComponentsResults:
Comprehensive
Price Priority
Stock Priority
Image
Part Number
Description
Availability
Unit Price(USD)
Quantity
Operation
Conn Unshrouded Header HDR 5 POS 2.54mm Solder ST Thru-Hole Carton
Pre-order
1,920,000
Factory Lead Time:22-26 weeks
19,200+$0.255
50,000+$0.2138
100,000+$0.1838
250,000+$0.1713
- +
Ext. Price(USD):$4,896.00
MOQ:19,200
Mult:19,200
SPQ:19,200
Wire-to-Board HDR 4 POS 4.2mm Solder ST Top Entry Thru-Hole T/R
Pre-order
750,000
Factory Lead Time:15 weeks
1,500+$0.585
- +
Ext. Price(USD):$877.50
MOQ:1,500
Mult:500
SPQ:500
Wire-to-Board HDR, 16 Pos, 4.2mm, Solder RA Side Entry TH T/R
Pre-order
675,000
Factory Lead Time:15 weeks
1,350+$5.3395
- +
Ext. Price(USD):$7,208.32
MOQ:1,350
Mult:1,350
SPQ:450
Wire-to-Board Header 16-Pos 4.2mm RA Side Entry TH Tray
Pre-order
495,000
Factory Lead Time:15 weeks
990+$5.2855
- +
Ext. Price(USD):$5,232.64
MOQ:990
Mult:990
SPQ:330
Molex
ECAD Model:
Conn Header PL 2Power/25Signal POS Press Fit RA Thru-Hole 49 Terminal 1 Port EXTreme Tray
Pre-order
27,000
Factory Lead Time:22-26 weeks
270+$18.15
800+$15.9
2,000+$15.55
- +
Ext. Price(USD):$4,900.50
MOQ:270
Mult:270
JST
ECAD Model:
JST Connector Housing, 3-Channel, 5.08mm Pitch, 1 Row
Pre-order
50,400
Factory Lead Time:18-22 weeks
26+
5,040+$1.6155
15,120+$1.5886
25,200+$1.5481
- +
Ext. Price(USD):$8,142.12
MOQ:5,040
Mult:5,040
SPQ:5,040
Wire-to-Board HDR 2 Pos 4.2mm Solder RA Side Entry TH T/R
Pre-order
1,200,000
Factory Lead Time:15 weeks
2,400+$0.8618
- +
Ext. Price(USD):$2,068.32
MOQ:2,400
Mult:2,400
SPQ:1,200
Wire-to-Board HDR, 8 Pos, 3mm Pitch, Solder, Top Entry, Thru-Hole, T/R
Pre-order
900,000
Factory Lead Time:15 weeks
1,800+$1.1212
- +
Ext. Price(USD):$2,018.16
MOQ:1,800
Mult:1,800
SPQ:600
Molex
ECAD Model:
Conn Wire to Board HDR 2 POS 3.96mm Solder RA Thru-Hole MV-396™ Bag
Available Stock
65
Estimated Ship Time:3-5 working days
08+
10+$0.7824
50+$0.7692
100+$0.7421
- +
Ext. Price(USD):$7.82
MOQ:10
Mult:10
SPQ:10
Wire-to-Board HDR, 10 POS, 4.2mm Pitch, Solder, ST Top Entry, Thru-Hole, T/R
Pre-order
600,000
Factory Lead Time:15 weeks
1,200+$1.0167
- +
Ext. Price(USD):$1,220.04
MOQ:1,200
Mult:1,200
SPQ:400
JST
ECAD Model:
Conn IDC RCP 10 POS 2.5mm IDT RA Cable Mount Box
Available Stock
161
Estimated Ship Time:14-16 working days
100+$2.2756
- +
Ext. Price(USD):$300.37
MOQ:132
Mult:1
SPQ:1
Amphenol
Package:SMD,P=0.8mm
ECAD Model:
Bergstak 0.80mm Pitch Mezzanine Connector 40-Pos Plug Dual Row
Pre-order
1,350,000
Factory Lead Time:6 weeks
2,700+$0.5658
- +
Ext. Price(USD):$1,527.66
MOQ:2,700
Mult:900
SPQ:900
Molex
ECAD Model:
2.00mm Pitch Milli Grid PCB Header Dual Row Vertical TH 0.05um Gold Au Plating w/ Peg 3.60mm PC Tail Length w/ Pick & Place Cap 40 Circuits Glow Wire Capable Tube
Pre-order
588,000
Factory Lead Time:22-26 weeks
5,880+$2.0625
- +
Ext. Price(USD):$12,127.50
MOQ:5,880
Mult:5,880
SPQ:5,880
Wire-to-Board HDR, 12 Pos, 4.2mm Pitch, Solder RA Side Entry TH T/R
Pre-order
675,000
Factory Lead Time:15 weeks
1,350+$4.2235
- +
Ext. Price(USD):$5,701.72
MOQ:1,350
Mult:1,350
SPQ:450
Molex
ECAD Model:
Conn HDR 4 POS 6.35mm Solder ST Thru-Hole 4 Terminal 1 Port
Pre-order
108,000
Factory Lead Time:22-26 weeks
1,080+$0.45
2,160+$0.375
4,320+$0.32
- +
Ext. Price(USD):$486.00
MOQ:1,080
Mult:1,080
SPQ:1,080
Wire-to-Board Connector HDR 24-Pin 3mm Solder Straight Top Entry Thru-Hole Tray
Pre-order
675,000
Factory Lead Time:15 weeks
1,350+$2.6462
- +
Ext. Price(USD):$3,572.37
MOQ:1,350
Mult:450
SPQ:450
Wire-to-Board HDR, 18-Pos, 4.2mm, Solder, ST Top Entry, TH, T/R
Pre-order
450,000
Factory Lead Time:15 weeks
900+$1.0254
- +
Ext. Price(USD):$922.86
MOQ:900
Mult:300
SPQ:300
Wire-to-Board HDR, 16 Pos, 4.2mm, Solder RA Side Entry TH T/R
Pre-order
675,000
Factory Lead Time:15 weeks
1,350+$1.2378
- +
Ext. Price(USD):$1,671.03
MOQ:1,350
Mult:1,350
SPQ:450
Wire-to-Board HDR 6 Pos 4.2mm Solder RA Side Entry Thru-Hole T/R
Pre-order
675,000
Factory Lead Time:15 weeks
1,350+$0.5397
- +
Ext. Price(USD):$728.59
MOQ:1,350
Mult:1,350
SPQ:450
Wire-to-Board HDR 12 POS 3mm Solder ST Top Entry Thru-Hole T/R
Pre-order
900,000
Factory Lead Time:15 weeks
1,800+$1.5337
- +
Ext. Price(USD):$2,760.66
MOQ:1,800
Mult:1,800
SPQ:600
Wire-to-Wire Connector, Plug, 2Pwr/39Sig Pos, 7.5mm/1.5mm Pitch, ST, Panel Mount
Pre-order
5,040
Factory Lead Time:16-18 weeks
504+$3.613
- +
Ext. Price(USD):$1,820.95
MOQ:504
Mult:504
Wire-to-Board HDR, 12 Pos, 4.2mm Pitch, Solder RA Side Entry TH T/R
Pre-order
675,000
Factory Lead Time:15 weeks
1,350+$4.314
- +
Ext. Price(USD):$5,823.90
MOQ:1,350
Mult:450
SPQ:450
High Power DIP Header Connector
Pre-order
2,550,000
Factory Lead Time:15 weeks
5,100+$2.9474
- +
Ext. Price(USD):$15,031.74
MOQ:5,100
Mult:5,100
SPQ:1,700
Wire-to-Board Header, 24 Pos, 4.2mm Pitch, Solder, ST Top Entry, Thru-Hole, T/R
Pre-order
450,000
Factory Lead Time:15 weeks
900+$8.2764
- +
Ext. Price(USD):$7,448.76
MOQ:900
Mult:900
SPQ:300
Wire-to-Board Connector HDR 22 POS 3mm Solder RA Side Entry TH T/R
Pre-order
900,000
Factory Lead Time:15 weeks
1,800+$0.9941
- +
Ext. Price(USD):$1,789.38
MOQ:1,800
Mult:1,800
SPQ:600
25 / PageGoto