Other Card Edge Components

Results:

Other card edge components include specialized or supplementary connector products that are not grouped with standard edgeboard connectors, housings, contacts, adapters or accessories. Because products in this category can use different interface and mounting formats, begin with the manufacturer part number and datasheet, identify the actual connector type, and then compare its mating and PCB requirements.

Pass the Part Identity Checkpoint

The category name alone does not define a single connector format. Use the following identification sequence before comparing products or approving a substitute.

1
Capture the Manufacturer Part Number Record the complete part number, manufacturer and product series without removing suffixes.
2
Identify the Actual Connector Type Determine whether the part is a header, socket, card-edge connector or another specialized component.
3
Confirm the Mating Interface Establish whether the product connects to a PCB card edge, another PCB, a cable assembly or a separate connector.
4
Decode the Physical Format Compare positions, rows, pitch, orientation, mounting type and termination method.
5
Verify the Datasheet Confirm the mating drawing, recommended PCB layout, ratings, materials and compatible product series.

Use the Part Number as the Primary Identifier

Product descriptions can be shortened or normalized across distributor databases. The complete manufacturer part number provides the most reliable route to the original drawing and product specification.

Manufacturer + Base Part Number + Prefix and Suffix + Series

Prefixes and suffixes may identify contact finish, packaging, mounting variation, keying or another configuration detail. Compare the complete ordering code when evaluating replacements.

Determine What the Part Connects

Establish the connection path before interpreting positions, pitch or mounting details. Products in this category may serve different interconnection functions.

PCB ↔ PCB
Board connection Confirm the interface on both boards, installed spacing and mating orientation.
PCB ↔ Cable
Wire connection Identify the mating housing, contact system, wire range and termination method.
Card ↔ Host
Card-edge interface Check card thickness, conductive-finger arrangement, insertion geometry and keying.

Decode the Connector Format

Once the product type and mating interface are known, translate the mechanical specification into a comparable set of fields.

Connector type Header, socket, receptacle, card-edge connector or another specified component.
Positions and rows Confirm the total number of electrical positions and how they are distributed across rows.
Pitch Match the center-to-center spacing of contacts or terminals to the mating product and PCB.
Orientation Check straight, vertical, right-angle, top-entry or side-entry configuration as applicable.
Mounting and termination Verify surface mount or through-hole installation and the specified solder or contact termination.

Match the PCB Installation

The connector body may fit the available space while its terminals or recommended footprint remain incompatible with the board. Check the complete installation drawing.

PCB footprint Compare pad or hole locations, terminal pattern, tolerances and keep-out areas.
Installed envelope Check connector height, body width, card approach and surrounding component clearance.
Assembly process Confirm soldering method, mounting hardware, packaging and automated assembly requirements.

Confirm the Mating Component

A compatible pitch and position count do not establish a complete mating match. Use the manufacturer’s drawing or related-products list to verify the opposing connector, housing, contact or PCB interface.

✓ Mating manufacturer part number ✓ Compatible product series ✓ Contact gender and arrangement ✓ Keying and polarization ✓ Engagement and insertion depth ✓ Electrical and temperature ratings

Build a Verifiable Part Identity

Save the identifying and mating information together so that purchasing, engineering and incoming inspection use the same product definition.

Part identity record
Manufacturer + Part number | Connector type | Mating product | Positions × pitch | Mounting

If the required product is already identifiable as a complete edgeboard connector, housing, contact, adapter or accessory, browse Card Edge Connectors & Components to select the corresponding product group.

Read More
Other Card Edge ComponentsResults:
Comprehensive
Price Priority
Stock Priority
Image
Part Number
Description
Availability
Unit Price(USD)
Quantity
Operation
Wire-to-Board Header 14 Pos 4.2mm Solder Straight Top Entry Thru-Hole T/R
Pre-order
600,000
Factory Lead Time:15 weeks
1,200+$0.7468
- +
Ext. Price(USD):$896.16
MOQ:1,200
Mult:1,200
SPQ:400
Conn Wire to Wire HDR 31 POS 1mm IDT ST Cable Mount Box
Available Stock
1,700
Estimated Ship Time:6-7 working days
22+
100+$0.439
- +
Ext. Price(USD):$43.90
MOQ:100
Mult:100
Board to Board Connector RCP 30 POS 1mm Solder ST SMD T/R
Available Stock
526
Estimated Ship Time:14-17 working days
10+$3.6182
30+$3.0154
500+$2.2544
1,000+$2.2464
- +
Ext. Price(USD):$50.65
MOQ:14
Mult:1
SPQ:1
Wire-to-Board Connector Header, 20 Pos, 4.2mm Pitch, Solder, Right Angle, Side Entry, Thru-Hole
Pre-order
315,000
Factory Lead Time:15 weeks
630+$7.3467
- +
Ext. Price(USD):$4,628.42
MOQ:630
Mult:630
SPQ:210
Conn Shrouded Header (2 Sides) HDR 3 POS 5mm Solder RA Side Entry Thru-Hole
Available Stock
67
Estimated Ship Time:6-12 working days
10+$0.7788
50+$0.7476
500+$0.6853
1,500+$0.6853
- +
Ext. Price(USD):$31.15
MOQ:40
Mult:10
JST
ECAD Model:
Conn Board to Board RCP 7 POS 1.25mm Solder ST Thru-Hole Box
Available Stock
990
Estimated Ship Time:6-7 working days
20+$0.4671
- +
Ext. Price(USD):$9.34
MOQ:20
Mult:20
Wire-to-Board HDR, 4 Pos, 3mm Pitch, Solder, ST, Top Entry, TH, Tray
Pre-order
2,767,500
Factory Lead Time:15 weeks
5,535+$0.4805
- +
Ext. Price(USD):$2,659.56
MOQ:5,535
Mult:5,535
SPQ:1,845
Wire-to-Board HDR 10 Pos 3mm Solder ST Top Entry TH T/R
Pre-order
900,000
Factory Lead Time:15 weeks
1,800+$0.6825
- +
Ext. Price(USD):$1,228.50
MOQ:1,800
Mult:1,800
SPQ:600
JST
ECAD Model:
Shrouded Header (4 Sides), HDR, 6 POS, 2mm Pitch, Solder, ST, Top Entry, Thru-Hole, Box
Available Stock
6,000
Estimated Ship Time:4-6 working days
1,000+$0.0629
- +
Ext. Price(USD):$62.90
MOQ:1,000
Mult:1,000
SPQ:1,000
Wire-to-Board HDR, 14 Pos, 3mm Pitch, Solder, ST, Top Entry, TH, T/R
Pre-order
675,000
Factory Lead Time:15 weeks
1,350+$1.6278
- +
Ext. Price(USD):$2,197.53
MOQ:1,350
Mult:1,350
SPQ:450
JST
ECAD Model:
Conn Unshrouded Header HDR 4 POS 8mm Solder ST Thru-Hole Box
Available Stock
230
Estimated Ship Time:14-17 working days
100+$0.422
300+$0.3658
4,000+$0.2902
5,000+$0.2902
- +
Ext. Price(USD):$50.21
MOQ:119
Mult:1
SPQ:1
Conn Shrouded Header HDR 7 POS 1.5mm Solder RA Thru-Hole Box
Available Stock
5,716
Estimated Ship Time:6-7 working days
22+
20+$0.3465
640+$0.1401
- +
Ext. Price(USD):$6.93
MOQ:20
Mult:20
Minitek Reg Pwr 5.7 Wire-to-Board Connector, Right Angle TH Header, Dual Row, Black, 10 Pos, 30 Gold Plating, Glow Wire Compatible, T/R Packing
Pre-order
600,000
Factory Lead Time:15 weeks
1,200+$6.1403
- +
Ext. Price(USD):$7,368.36
MOQ:1,200
Mult:1,200
SPQ:400
CamdenBoss
ECAD Model:
Wire-to-Board Connector HDR, 8 Pos, 3.81mm Pitch, Solder, RA Side Entry, Thru-Hole
Available Stock
72
Estimated Ship Time:6-12 working days
1+$2.725
10+$2.4416
500+$2.3544
1,000+$2.3544
- +
Ext. Price(USD):$24.52
MOQ:9
Mult:1
JST
ECAD Model:
Board-to-Board Insulation Displacement Connectors
Available Stock
11,547
Estimated Ship Time:6-7 working days
21+
20+$0.2379
1,000+$0.1145
- +
Ext. Price(USD):$4.75
MOQ:20
Mult:20
Wire-to-Board HDR, 2 POS, 4.2mm, ST Top Entry Thru-Hole T/R
Pre-order
750,000
Factory Lead Time:15 weeks
1,500+$1.5877
- +
Ext. Price(USD):$2,381.55
MOQ:1,500
Mult:1,500
SPQ:500
Molex
ECAD Model:
Wire-to-Board HDR 20 Pos 4.2mm Solder RA Side Entry Thru-Hole Tray
Pre-order
56,000
Factory Lead Time:22-26 weeks
560+$3.4625
1,120+$3.3375
2,500+$2.9
5,000+$2.7
- +
Ext. Price(USD):$1,939.00
MOQ:560
Mult:560
SPQ:560
Wire-to-Board HDR 10-Pin 4.2mm Pitch Solder RA Side Entry TH T/R
Pre-order
675,000
Factory Lead Time:15 weeks
1,350+$0.7782
- +
Ext. Price(USD):$1,050.57
MOQ:1,350
Mult:1,350
SPQ:450
Molex
ECAD Model:
Pre-order
432,000
Factory Lead Time:22-26 weeks
4,320+$1.5875
- +
Ext. Price(USD):$6,858.00
MOQ:4,320
Mult:4,320
SPQ:4,320
Conn Shrouded Header HDR 3 POS 1mm Solder RA SMD T/R
Available Stock
8,820
Estimated Ship Time:6-7 working days
20+$0.3171
- +
Ext. Price(USD):$6.34
MOQ:20
Mult:20
Wire-to-Board HDR, 16 POS, 4.2mm, Solder, ST Top Entry, TH, T/R
Pre-order
450,000
Factory Lead Time:15 weeks
900+$0.914
- +
Ext. Price(USD):$822.60
MOQ:900
Mult:900
SPQ:300
Wire-to-Wire Connector HDR 5 Pos 1mm IDT ST Cable Mount Box
Available Stock
4,270
Estimated Ship Time:6-7 working days
22+
20+$0.2364
250+$0.1224
- +
Ext. Price(USD):$4.72
MOQ:20
Mult:20
Wire-to-Board HDR, 10 POS, 4.2mm Pitch, Solder, ST Top Entry, Thru-Hole, T/R
Pre-order
600,000
Factory Lead Time:15 weeks
1,200+$0.968
- +
Ext. Price(USD):$1,161.60
MOQ:1,200
Mult:1,200
SPQ:400
Wire-to-Board HDR, 18-Pos, 4.2mm, Solder, ST Top Entry, TH, T/R
Pre-order
450,000
Factory Lead Time:15 weeks
900+$1.485
- +
Ext. Price(USD):$1,336.50
MOQ:900
Mult:900
SPQ:300
Conn Unshrouded Header HDR 5 POS 2.54mm Solder ST Thru-Hole Carton
Pre-order
1,920,000
Factory Lead Time:22-26 weeks
19,200+$0.255
50,000+$0.2138
100,000+$0.1838
250,000+$0.1713
- +
Ext. Price(USD):$4,896.00
MOQ:19,200
Mult:19,200
SPQ:19,200
25 / PageGoto