Other Card Edge Components

Results:

Other card edge components include specialized or supplementary connector products that are not grouped with standard edgeboard connectors, housings, contacts, adapters or accessories. Because products in this category can use different interface and mounting formats, begin with the manufacturer part number and datasheet, identify the actual connector type, and then compare its mating and PCB requirements.

Pass the Part Identity Checkpoint

The category name alone does not define a single connector format. Use the following identification sequence before comparing products or approving a substitute.

1
Capture the Manufacturer Part Number Record the complete part number, manufacturer and product series without removing suffixes.
2
Identify the Actual Connector Type Determine whether the part is a header, socket, card-edge connector or another specialized component.
3
Confirm the Mating Interface Establish whether the product connects to a PCB card edge, another PCB, a cable assembly or a separate connector.
4
Decode the Physical Format Compare positions, rows, pitch, orientation, mounting type and termination method.
5
Verify the Datasheet Confirm the mating drawing, recommended PCB layout, ratings, materials and compatible product series.

Use the Part Number as the Primary Identifier

Product descriptions can be shortened or normalized across distributor databases. The complete manufacturer part number provides the most reliable route to the original drawing and product specification.

Manufacturer + Base Part Number + Prefix and Suffix + Series

Prefixes and suffixes may identify contact finish, packaging, mounting variation, keying or another configuration detail. Compare the complete ordering code when evaluating replacements.

Determine What the Part Connects

Establish the connection path before interpreting positions, pitch or mounting details. Products in this category may serve different interconnection functions.

PCB ↔ PCB
Board connection Confirm the interface on both boards, installed spacing and mating orientation.
PCB ↔ Cable
Wire connection Identify the mating housing, contact system, wire range and termination method.
Card ↔ Host
Card-edge interface Check card thickness, conductive-finger arrangement, insertion geometry and keying.

Decode the Connector Format

Once the product type and mating interface are known, translate the mechanical specification into a comparable set of fields.

Connector type Header, socket, receptacle, card-edge connector or another specified component.
Positions and rows Confirm the total number of electrical positions and how they are distributed across rows.
Pitch Match the center-to-center spacing of contacts or terminals to the mating product and PCB.
Orientation Check straight, vertical, right-angle, top-entry or side-entry configuration as applicable.
Mounting and termination Verify surface mount or through-hole installation and the specified solder or contact termination.

Match the PCB Installation

The connector body may fit the available space while its terminals or recommended footprint remain incompatible with the board. Check the complete installation drawing.

PCB footprint Compare pad or hole locations, terminal pattern, tolerances and keep-out areas.
Installed envelope Check connector height, body width, card approach and surrounding component clearance.
Assembly process Confirm soldering method, mounting hardware, packaging and automated assembly requirements.

Confirm the Mating Component

A compatible pitch and position count do not establish a complete mating match. Use the manufacturer’s drawing or related-products list to verify the opposing connector, housing, contact or PCB interface.

✓ Mating manufacturer part number ✓ Compatible product series ✓ Contact gender and arrangement ✓ Keying and polarization ✓ Engagement and insertion depth ✓ Electrical and temperature ratings

Build a Verifiable Part Identity

Save the identifying and mating information together so that purchasing, engineering and incoming inspection use the same product definition.

Part identity record
Manufacturer + Part number | Connector type | Mating product | Positions × pitch | Mounting

If the required product is already identifiable as a complete edgeboard connector, housing, contact, adapter or accessory, browse Card Edge Connectors & Components to select the corresponding product group.

Read More
Other Card Edge ComponentsResults:
Comprehensive
Price Priority
Stock Priority
Image
Part Number
Description
Availability
Unit Price(USD)
Quantity
Operation
Wire-to-Board HDR Connector 22 Pos 4.2mm Solder ST Top Entry Thru-Hole T/R
Pre-order
450,000
Factory Lead Time:15 weeks
900+$1.6243
- +
Ext. Price(USD):$1,461.87
MOQ:900
Mult:900
SPQ:300
Connector Header 50P 2mm
Available Stock
1,320
Estimated Ship Time:5-7 working days
11+$4.7395
550+$3.7095
- +
Ext. Price(USD):$52.13
MOQ:11
Mult:1
SPQ:110
Wire-to-Board HDR, 20 Pos, 4.2mm Pitch, Solder, RA Side Entry, TH, T/R
Pre-order
675,000
Factory Lead Time:15 weeks
1,350+$1.3423
- +
Ext. Price(USD):$1,812.10
MOQ:1,350
Mult:450
SPQ:450
Wire-to-Board HDR 16-Pin 4.2mm Solder RA Side Entry TH
Pre-order
405,000
Factory Lead Time:15 weeks
810+$1.0202
- +
Ext. Price(USD):$826.36
MOQ:810
Mult:810
SPQ:270
Board to Board Connector, 120 Pos, 0.8mm Pitch, Solder, Straight, SMD, Box/Tube
Pre-order
540,000
Factory Lead Time:22-26 weeks
5,400+$6.925
10,008+$6.125
25,002+$5.1625
- +
Ext. Price(USD):$37,395.00
MOQ:5,400
Mult:5,400
SPQ:5,400
JST
ECAD Model:
IDC Connector SKT 8 POS 2.5mm IDT ST Top Entry Cable Mount Bag
Pre-order
90,000
Factory Lead Time:18-22 weeks
26+
9,000+$0.1005
27,000+$0.0988
45,000+$0.0963
- +
Ext. Price(USD):$904.50
MOQ:9,000
Mult:9,000
SPQ:9,000
Molex
ECAD Model:
Pre-order
540,000
Factory Lead Time:22-26 weeks
5,400+$0.625
12,600+$0.5375
30,600+$0.525
- +
Ext. Price(USD):$3,375.00
MOQ:5,400
Mult:5,400
Wire-to-Board HDR, 10 POS, 4.2mm Pitch, Solder, ST Top Entry, Thru-Hole, T/R
Pre-order
600,000
Factory Lead Time:15 weeks
1,200+$3.6612
- +
Ext. Price(USD):$4,393.44
MOQ:1,200
Mult:1,200
SPQ:400
JST
ECAD Model:
Conn Shrouded Header HDR 6 POS 1.5mm Solder RA Thru-Hole Box
Available Stock
5,040
Estimated Ship Time:4-6 working days
720+$0.1748
- +
Ext. Price(USD):$125.85
MOQ:720
Mult:720
SPQ:720
Wire-to-Board Header, 20 Pos, 4.2mm Pitch, Solder, Straight Top Entry Thru-Hole, T/R
Pre-order
450,000
Factory Lead Time:15 weeks
900+$1.4188
- +
Ext. Price(USD):$1,276.92
MOQ:900
Mult:300
SPQ:300
Wire-to-Board HDR 6 Pos 4.2mm Solder RA Side Entry Thru-Hole T/R
Pre-order
675,000
Factory Lead Time:15 weeks
1,350+$2.2388
- +
Ext. Price(USD):$3,022.38
MOQ:1,350
Mult:1,350
SPQ:450
Wire-to-Board Header 14 POS 3mm Solder ST Top Entry Thru-Hole Tray
Pre-order
1,080,000
Factory Lead Time:15 weeks
2,160+$1.3318
- +
Ext. Price(USD):$2,876.68
MOQ:2,160
Mult:2,160
SPQ:720
Molex
ECAD Model:
Nano-Fit Right-Angle Header, Through Hole, 2.50mm Pitch, Single Row
Pre-order
180,000
Factory Lead Time:22-26 weeks
1,800+$1.375
4,000+$1.2
10,000+$1.175
- +
Ext. Price(USD):$2,475.00
MOQ:1,800
Mult:1,800
Conn Ejector Header HDR 34 POS 2.54mm Solder ST Thru-Hole Box
Available Stock
52
Estimated Ship Time:6-7 working days
24+
20+$3.1183
25+$1.0603
- +
Ext. Price(USD):$62.36
MOQ:20
Mult:20
Wire-to-Board HDR, 10 POS, 4.2mm Pitch, Solder, ST Top Entry, Thru-Hole, T/R
Pre-order
600,000
Factory Lead Time:15 weeks
1,200+$3.9989
- +
Ext. Price(USD):$4,798.68
MOQ:1,200
Mult:1,200
SPQ:400
Available Stock
1,869
Estimated Ship Time:14-17 working days
100+$0.4585
500+$0.4483
1,000+$0.4221
2,000+$0.4013
4,000+$0.399
- +
Ext. Price(USD):$50.43
MOQ:110
Mult:1
SPQ:1
Pre-order
600,000
Factory Lead Time:15 weeks
1,200+$5.1027
- +
Ext. Price(USD):$6,123.24
MOQ:1,200
Mult:1,200
SPQ:400
Conn Board Stacker HDR 10 2.54 mm Solder Straight Through Hole Poly Bag
Pre-order
15,000
Factory Lead Time:10-16 weeks
24+
1,500+$0.7026
1,650+$0.6842
- +
Ext. Price(USD):$1,053.90
MOQ:1,500
Mult:150
SPQ:150
Wire-to-Board Header, 24 Pos, 4.2mm Pitch, Solder, ST Top Entry, Thru-Hole, T/R
Pre-order
450,000
Factory Lead Time:15 weeks
900+$1.8541
- +
Ext. Price(USD):$1,668.69
MOQ:900
Mult:900
SPQ:300
JST
ECAD Model:
Conn Unshrouded Header HDR 8 POS 5mm Solder ST Thru-Hole Box
Available Stock
2,000
Estimated Ship Time:4-6 working days
200+$0.5053
- +
Ext. Price(USD):$101.06
MOQ:200
Mult:200
SPQ:200
JST Wire-to-Board Connector, JFA J2000 Series, Right Angle, 2.54mm Pitch, 3-Pin
Available Stock
294
Estimated Ship Time:14-17 working days
10+$4.295
30+$3.7291
200+$3.1073
300+$3.0939
- +
Ext. Price(USD):$51.54
MOQ:12
Mult:1
SPQ:1
Wire-to-Board Connector HDR 20 Pos 4.2mm Solder Straight Top Entry Thru-Hole Tray
Pre-order
540,000
Factory Lead Time:15 weeks
1,080+$8.7325
- +
Ext. Price(USD):$9,431.10
MOQ:1,080
Mult:1,080
SPQ:360
Wire-to-Board Header 14 Pos 4.2mm Solder Straight Top Entry Thru-Hole T/R
Pre-order
600,000
Factory Lead Time:15 weeks
1,200+$1.1334
- +
Ext. Price(USD):$1,360.08
MOQ:1,200
Mult:1,200
SPQ:400
Wire-to-Board HDR Connector 22 Pos 4.2mm Solder ST Top Entry Thru-Hole T/R
Pre-order
450,000
Factory Lead Time:15 weeks
900+$1.6399
- +
Ext. Price(USD):$1,475.91
MOQ:900
Mult:900
SPQ:300
Molex
ECAD Model:
Socket Strip RCP 22 Pos 2mm Solder ST TH Milli-Grid™ Tube
Pre-order
26,500
Factory Lead Time:22-26 weeks
265+$1.725
529+$1.5875
1,058+$1.5125
2,500+$1.3125
5,000+$1.225
- +
Ext. Price(USD):$457.12
MOQ:265
Mult:265
SPQ:265
25 / PageGoto