Other Card Edge Components

Results:

Other card edge components include specialized or supplementary connector products that are not grouped with standard edgeboard connectors, housings, contacts, adapters or accessories. Because products in this category can use different interface and mounting formats, begin with the manufacturer part number and datasheet, identify the actual connector type, and then compare its mating and PCB requirements.

Pass the Part Identity Checkpoint

The category name alone does not define a single connector format. Use the following identification sequence before comparing products or approving a substitute.

1
Capture the Manufacturer Part Number Record the complete part number, manufacturer and product series without removing suffixes.
2
Identify the Actual Connector Type Determine whether the part is a header, socket, card-edge connector or another specialized component.
3
Confirm the Mating Interface Establish whether the product connects to a PCB card edge, another PCB, a cable assembly or a separate connector.
4
Decode the Physical Format Compare positions, rows, pitch, orientation, mounting type and termination method.
5
Verify the Datasheet Confirm the mating drawing, recommended PCB layout, ratings, materials and compatible product series.

Use the Part Number as the Primary Identifier

Product descriptions can be shortened or normalized across distributor databases. The complete manufacturer part number provides the most reliable route to the original drawing and product specification.

Manufacturer + Base Part Number + Prefix and Suffix + Series

Prefixes and suffixes may identify contact finish, packaging, mounting variation, keying or another configuration detail. Compare the complete ordering code when evaluating replacements.

Determine What the Part Connects

Establish the connection path before interpreting positions, pitch or mounting details. Products in this category may serve different interconnection functions.

PCB ↔ PCB
Board connection Confirm the interface on both boards, installed spacing and mating orientation.
PCB ↔ Cable
Wire connection Identify the mating housing, contact system, wire range and termination method.
Card ↔ Host
Card-edge interface Check card thickness, conductive-finger arrangement, insertion geometry and keying.

Decode the Connector Format

Once the product type and mating interface are known, translate the mechanical specification into a comparable set of fields.

Connector type Header, socket, receptacle, card-edge connector or another specified component.
Positions and rows Confirm the total number of electrical positions and how they are distributed across rows.
Pitch Match the center-to-center spacing of contacts or terminals to the mating product and PCB.
Orientation Check straight, vertical, right-angle, top-entry or side-entry configuration as applicable.
Mounting and termination Verify surface mount or through-hole installation and the specified solder or contact termination.

Match the PCB Installation

The connector body may fit the available space while its terminals or recommended footprint remain incompatible with the board. Check the complete installation drawing.

PCB footprint Compare pad or hole locations, terminal pattern, tolerances and keep-out areas.
Installed envelope Check connector height, body width, card approach and surrounding component clearance.
Assembly process Confirm soldering method, mounting hardware, packaging and automated assembly requirements.

Confirm the Mating Component

A compatible pitch and position count do not establish a complete mating match. Use the manufacturer’s drawing or related-products list to verify the opposing connector, housing, contact or PCB interface.

✓ Mating manufacturer part number ✓ Compatible product series ✓ Contact gender and arrangement ✓ Keying and polarization ✓ Engagement and insertion depth ✓ Electrical and temperature ratings

Build a Verifiable Part Identity

Save the identifying and mating information together so that purchasing, engineering and incoming inspection use the same product definition.

Part identity record
Manufacturer + Part number | Connector type | Mating product | Positions × pitch | Mounting

If the required product is already identifiable as a complete edgeboard connector, housing, contact, adapter or accessory, browse Card Edge Connectors & Components to select the corresponding product group.

Read More
Other Card Edge ComponentsResults:
Comprehensive
Price Priority
Stock Priority
Image
Part Number
Description
Availability
Unit Price(USD)
Quantity
Operation
Wire-to-Board HDR, 2 POS, 4.2mm, ST Top Entry Thru-Hole T/R
Pre-order
750,000
Factory Lead Time:15 weeks
1,500+$0.5049
- +
Ext. Price(USD):$757.35
MOQ:1,500
Mult:500
SPQ:500
Wire-to-Board Connector HDR 19 Pos 2.54mm Solder RA Thru-Hole
Pre-order
50,000
Factory Lead Time:22-26 weeks
500+$3.125
1,000+$2.95
2,500+$2.7375
5,000+$2.625
10,000+$2.525
- +
Ext. Price(USD):$1,562.50
MOQ:500
Mult:500
SPQ:500
Molex
ECAD Model:
Conn Shrouded Header (4 Sides) M 18 POS 2mm Solder ST Top Entry Thru-Hole Tube
Pre-order
468,000
Factory Lead Time:22-26 weeks
4,680+$2.0375
- +
Ext. Price(USD):$9,535.50
MOQ:4,680
Mult:4,680
SPQ:4,680
Wire-to-Board HDR, 14 Pos, 3mm Pitch, Solder, ST, Top Entry, TH, T/R
Pre-order
675,000
Factory Lead Time:15 weeks
1,350+$0.7956
- +
Ext. Price(USD):$1,074.06
MOQ:1,350
Mult:1,350
SPQ:450
JST
ECAD Model:
2.5mm Pitch Disconnectable Crimp Style Connectors
Pre-order
5,000
Factory Lead Time:16-18 weeks
500+$0.4391
- +
Ext. Price(USD):$219.55
MOQ:500
Mult:500
Wire-to-Board HDR, 2 Pos, 4.2mm Pitch, Solder, ST Top Entry, TH
Pre-order
2,362,500
Factory Lead Time:15 weeks
4,725+$1.485
- +
Ext. Price(USD):$7,016.62
MOQ:4,725
Mult:4,725
SPQ:1,575
Molex
ECAD Model:
Conn Shrouded Header (4 Sides) M 36 POS 2mm Solder ST Top Entry Thru-Hole Tube
Pre-order
468,000
Factory Lead Time:22-26 weeks
4,680+$1.825
- +
Ext. Price(USD):$8,541.00
MOQ:4,680
Mult:4,680
SPQ:4,680
Wire-to-Board HDR, 22 POS, 3mm, Solder, ST Top Entry, Thru-Hole, T/R
Pre-order
675,000
Factory Lead Time:15 weeks
1,350+$2.3955
- +
Ext. Price(USD):$3,233.92
MOQ:1,350
Mult:1,350
SPQ:450
Wire-to-Board HDR 12-Pin 4.2mm Solder Top Entry Thru-Hole T/R
Pre-order
600,000
Factory Lead Time:15 weeks
1,200+$4.5004
- +
Ext. Price(USD):$5,400.48
MOQ:1,200
Mult:1,200
SPQ:400
JST
ECAD Model:
Shrouded Header (4 Sides) HDR 30 POS 2mm Solder RA Side Entry Thru-Hole Box
Pre-order
36,000
Factory Lead Time:18-22 weeks
26+
3,600+$0.4346
10,800+$0.4273
18,000+$0.4165
- +
Ext. Price(USD):$1,564.56
MOQ:3,600
Mult:3,600
SPQ:3,600
Conn Shrouded Header (4 Sides) HDR 28 POS 2mm Solder ST Top Entry SMD
Available Stock
1,205
Estimated Ship Time:6-7 working days
23+
20+$3.0158
400+$0.8053
- +
Ext. Price(USD):$60.31
MOQ:20
Mult:20
Molex
ECAD Model:
Conn Unshrouded Header HDR 18 POS 3.96mm Solder ST Top Entry Thru-Hole KK® Bag
Pre-order
30,000
Factory Lead Time:22-26 weeks
300+$1.5125
1,200+$1.425
- +
Ext. Price(USD):$453.75
MOQ:300
Mult:300
SPQ:300
Conn Shrouded Header (4 Sides) HDR 3 POS 2.5mm Solder ST Top Entry Thru-Hole Box
Available Stock
5,807
Estimated Ship Time:5-9 working days
22+
10+$0.0559
50+$0.0533
150+$0.0524
- +
Ext. Price(USD):$0.55
MOQ:10
Mult:5
SPQ:400
Wire-to-Board Connector
Pre-order
350,000
Factory Lead Time:22-26 weeks
3,500+$0.95
5,600+$0.8125
500,500+$0.45
750,400+$0.4125
- +
Ext. Price(USD):$3,325.00
MOQ:3,500
Mult:3,500
Conn Mictor SB Connector PL 200 POS 0.8mm Solder ST SMD Box/Tray
Pre-order
500
Factory Lead Time:22-26 weeks
5+$27.625
10+$23.2375
20+$19.5125
1,000+$18.5
5,000+$17.4625
- +
Ext. Price(USD):$138.12
MOQ:5
Mult:5
SPQ:5
Conn Shrouded Header HDR 22 POS 2mm Solder ST Thru-Hole Box
Pre-order
28,800
Factory Lead Time:16-18 weeks
2,880+$0.4729
- +
Ext. Price(USD):$1,361.95
MOQ:2,880
Mult:2,880
Wire-to-Board Header, 18 Pos, 4.2mm Pitch, Solder RA Side Entry, Thru-Hole, T/R
Pre-order
675,000
Factory Lead Time:15 weeks
1,350+$6.4884
- +
Ext. Price(USD):$8,759.34
MOQ:1,350
Mult:1,350
SPQ:450
JST
ECAD Model:
Shrouded Header HDR 2 Pos 2mm Solder Straight SMD T/R
Pre-order
80,000
Factory Lead Time:18-22 weeks
26+
8,000+$0.1486
24,000+$0.1461
40,000+$0.1424
- +
Ext. Price(USD):$1,188.80
MOQ:8,000
Mult:8,000
SPQ:8,000
Ejector Header HDR 34 Pos 2.54mm Solder RA Thru-Hole
Available Stock
439
Estimated Ship Time:6-7 working days
22+
20+$3.0188
25+$1.2048
- +
Ext. Price(USD):$60.37
MOQ:20
Mult:20
Available Stock
2,000
Estimated Ship Time:5-7 working days
10+$2.7971
500+$2.1954
2,500+$1.8594
- +
Ext. Price(USD):$27.97
MOQ:10
Mult:1
SPQ:200
Conn Unshrouded Header HDR 8 POS 2.54mm Solder ST Thru-Hole Automotive Carton
Pre-order
16,000
Factory Lead Time:22-26 weeks
160+$0.7875
640+$0.7375
5,000+$0.5625
10,000+$0.425
50,000+$0.3538
- +
Ext. Price(USD):$126.00
MOQ:160
Mult:160
SPQ:160
JST
ECAD Model:
Conn Wire to Board HDR 8 POS 2.5mm Solder ST Thru-Hole
Pre-order
30,000
Factory Lead Time:18-22 weeks
26+
3,000+$0.2919
9,000+$0.2871
15,000+$0.2798
- +
Ext. Price(USD):$875.70
MOQ:3,000
Mult:3,000
SPQ:3,000
Wire-to-Board HDR 2 Pos 4.2mm Solder RA Side Entry TH T/R
Pre-order
1,200,000
Factory Lead Time:15 weeks
2,400+$0.4057
- +
Ext. Price(USD):$973.68
MOQ:2,400
Mult:2,400
SPQ:1,200
Wire-to-Board Header 14 Pos 4.2mm Solder Straight Top Entry Thru-Hole T/R
Pre-order
600,000
Factory Lead Time:15 weeks
1,200+$1.2535
- +
Ext. Price(USD):$1,504.20
MOQ:1,200
Mult:1,200
SPQ:400
Elevated Shrouded Header, 20 Pos, 2.54mm, Solder, ST Top Entry, Thru-Hole, Bulk
Available Stock
2
Estimated Ship Time:4-6 working days
1+$2.1349
- +
Ext. Price(USD):$2.13
MOQ:1
Mult:1
SPQ:1
25 / PageGoto