Other Card Edge Components

Results:

Other card edge components include specialized or supplementary connector products that are not grouped with standard edgeboard connectors, housings, contacts, adapters or accessories. Because products in this category can use different interface and mounting formats, begin with the manufacturer part number and datasheet, identify the actual connector type, and then compare its mating and PCB requirements.

Pass the Part Identity Checkpoint

The category name alone does not define a single connector format. Use the following identification sequence before comparing products or approving a substitute.

1
Capture the Manufacturer Part Number Record the complete part number, manufacturer and product series without removing suffixes.
2
Identify the Actual Connector Type Determine whether the part is a header, socket, card-edge connector or another specialized component.
3
Confirm the Mating Interface Establish whether the product connects to a PCB card edge, another PCB, a cable assembly or a separate connector.
4
Decode the Physical Format Compare positions, rows, pitch, orientation, mounting type and termination method.
5
Verify the Datasheet Confirm the mating drawing, recommended PCB layout, ratings, materials and compatible product series.

Use the Part Number as the Primary Identifier

Product descriptions can be shortened or normalized across distributor databases. The complete manufacturer part number provides the most reliable route to the original drawing and product specification.

Manufacturer + Base Part Number + Prefix and Suffix + Series

Prefixes and suffixes may identify contact finish, packaging, mounting variation, keying or another configuration detail. Compare the complete ordering code when evaluating replacements.

Determine What the Part Connects

Establish the connection path before interpreting positions, pitch or mounting details. Products in this category may serve different interconnection functions.

PCB ↔ PCB
Board connection Confirm the interface on both boards, installed spacing and mating orientation.
PCB ↔ Cable
Wire connection Identify the mating housing, contact system, wire range and termination method.
Card ↔ Host
Card-edge interface Check card thickness, conductive-finger arrangement, insertion geometry and keying.

Decode the Connector Format

Once the product type and mating interface are known, translate the mechanical specification into a comparable set of fields.

Connector type Header, socket, receptacle, card-edge connector or another specified component.
Positions and rows Confirm the total number of electrical positions and how they are distributed across rows.
Pitch Match the center-to-center spacing of contacts or terminals to the mating product and PCB.
Orientation Check straight, vertical, right-angle, top-entry or side-entry configuration as applicable.
Mounting and termination Verify surface mount or through-hole installation and the specified solder or contact termination.

Match the PCB Installation

The connector body may fit the available space while its terminals or recommended footprint remain incompatible with the board. Check the complete installation drawing.

PCB footprint Compare pad or hole locations, terminal pattern, tolerances and keep-out areas.
Installed envelope Check connector height, body width, card approach and surrounding component clearance.
Assembly process Confirm soldering method, mounting hardware, packaging and automated assembly requirements.

Confirm the Mating Component

A compatible pitch and position count do not establish a complete mating match. Use the manufacturer’s drawing or related-products list to verify the opposing connector, housing, contact or PCB interface.

✓ Mating manufacturer part number ✓ Compatible product series ✓ Contact gender and arrangement ✓ Keying and polarization ✓ Engagement and insertion depth ✓ Electrical and temperature ratings

Build a Verifiable Part Identity

Save the identifying and mating information together so that purchasing, engineering and incoming inspection use the same product definition.

Part identity record
Manufacturer + Part number | Connector type | Mating product | Positions × pitch | Mounting

If the required product is already identifiable as a complete edgeboard connector, housing, contact, adapter or accessory, browse Card Edge Connectors & Components to select the corresponding product group.

Read More
Other Card Edge ComponentsResults:
Comprehensive
Price Priority
Stock Priority
Image
Part Number
Description
Availability
Unit Price(USD)
Quantity
Operation
JST
ECAD Model:
Board to Board Connector RCP 13 Pos 2.5mm Solder Straight Thru-Hole
Available Stock
80
Estimated Ship Time:4-6 working days
26+
1+$1.2538
- +
Ext. Price(USD):$1.25
MOQ:1
Mult:1
SPQ:1
Molex
ECAD Model:
Pre-order
72,000
Factory Lead Time:22-26 weeks
720+$7.8875
1,000+$7.6625
- +
Ext. Price(USD):$5,679.00
MOQ:720
Mult:720
SPQ:720
Molex
ECAD Model:
Conn Board to Board RCP 16 POS 0.4mm Solder ST SMD SlimStack™ T/R
Available Stock
75
Estimated Ship Time:3-5 working days
07+
10+$0.4781
50+$0.47
100+$0.4535
- +
Ext. Price(USD):$4.78
MOQ:10
Mult:10
SPQ:10
Wire-to-Board Header 6 Pos 4.2mm Solder Straight Top Entry Thru-Hole T/R
Pre-order
750,000
Factory Lead Time:15 weeks
1,500+$2.3659
- +
Ext. Price(USD):$3,548.85
MOQ:1,500
Mult:1,500
SPQ:500
Conn Wire-to-Wire HDR 7 POS 1mm IDT ST Cable Mount Box
Available Stock
3,920
Estimated Ship Time:6-7 working days
22+
20+$0.3171
250+$0.1642
- +
Ext. Price(USD):$6.34
MOQ:20
Mult:20
Conn Shrouded Header HDR 2 POS Solder ST Top Entry Thru-Hole
Pre-order
270,000
Factory Lead Time:22-26 weeks
2,700+$0.9
15,000+$0.8875
30,000+$0.875
60,000+$0.85
- +
Ext. Price(USD):$2,430.00
MOQ:2,700
Mult:2,700
Molex
ECAD Model:
Conn Shrouded Header HDR 5 POS 1.5mm Solder ST Top Entry SMD CLIK-Mate T/R
Pre-order
540,000
Factory Lead Time:22-26 weeks
5,400+$1.0625
12,600+$0.925
30,600+$0.9125
- +
Ext. Price(USD):$5,737.50
MOQ:5,400
Mult:5,400
Wire-to-Board Connector, 3.0mm, Right Angle SMT Tails and Hold Down Header
Pre-order
1,500,000
Factory Lead Time:15 weeks
3,000+$3.3443
- +
Ext. Price(USD):$10,032.90
MOQ:3,000
Mult:3,000
SPQ:600
18P MTA100 HDR ASSY F/L SQ STR LF
Pre-order
500,000
Factory Lead Time:22-26 weeks
5,000+$1.0625
10,000+$1.025
25,000+$0.85
- +
Ext. Price(USD):$5,312.50
MOQ:5,000
Mult:5,000
SPQ:5,000
Wire-to-Board HDR 18 Pos 4.2mm Solder RA Side Entry TH Tray
Pre-order
450,000
Factory Lead Time:15 weeks
900+$1.2657
- +
Ext. Price(USD):$1,139.13
MOQ:900
Mult:300
SPQ:300
Wire-to-Board HDR 12-Pin 4.2mm Solder Right Angle Side Entry TH
Pre-order
675,000
Factory Lead Time:15 weeks
1,350+$0.82
- +
Ext. Price(USD):$1,107.00
MOQ:1,350
Mult:450
SPQ:450
JST
ECAD Model:
Conn Shrouded Header (3 Sides) HDR 13 POS 2.5mm Solder ST Top Entry Thru-Hole
Available Stock
5,239
Estimated Ship Time:6-7 working days
22+
20+$0.2075
250+$0.0887
- +
Ext. Price(USD):$4.15
MOQ:20
Mult:20
JST
ECAD Model:
2.5mm Pitch Shrouded Header
Pre-order
96,000
Factory Lead Time:18-22 weeks
26+
9,600+$0.2544
28,800+$0.2502
48,000+$0.2438
- +
Ext. Price(USD):$2,442.24
MOQ:9,600
Mult:9,600
SPQ:9,600
Wire-to-Board Connector, Header, 6 Pos, 4.2mm Pitch, Solder, Right Angle, Side Entry, TH, Tray
Pre-order
1,260,000
Factory Lead Time:15 weeks
2,520+$1.9203
- +
Ext. Price(USD):$4,839.15
MOQ:2,520
Mult:2,520
SPQ:840
JST
ECAD Model:
Conn Wire-to-Board HDR 3 POS 3.96mm Solder RA Side Entry TH
Pre-order
90,000
Factory Lead Time:16-18 weeks
9,000+$1.8847
- +
Ext. Price(USD):$16,962.30
MOQ:9,000
Mult:9,000
Pre-order
3,000,000
Factory Lead Time:11 weeks
6,000+$0.2786
- +
Ext. Price(USD):$1,671.60
MOQ:6,000
Mult:6,000
SPQ:6,000
Pre-order
150,000
Factory Lead Time:22-26 weeks
1,500+$3.0125
5,000+$2.8125
10,000+$2.6375
- +
Ext. Price(USD):$4,518.75
MOQ:1,500
Mult:1,500
SPQ:1,500
Conn Shrouded Header (4 Sides) HDR 8 POS 1.5mm Solder RA Side Entry SMD T/R
Available Stock
5,545
Estimated Ship Time:6-7 working days
23+
20+$0.403
1,000+$0.1519
- +
Ext. Price(USD):$8.06
MOQ:20
Mult:20
Wire-to-Board Header 16 Pos 3mm Solder Straight Top Entry Thru-Hole T/R
Pre-order
675,000
Factory Lead Time:15 weeks
1,350+$0.8287
- +
Ext. Price(USD):$1,118.74
MOQ:1,350
Mult:1,350
SPQ:450
Wire-to-Board HDR Connector 22 Pos 4.2mm Solder ST Top Entry Thru-Hole T/R
Pre-order
450,000
Factory Lead Time:15 weeks
900+$1.6312
- +
Ext. Price(USD):$1,468.08
MOQ:900
Mult:900
SPQ:300
Molex
ECAD Model:
2.00mm Pitch Milli Grid PCB Header Dual Row Right Angle TH, 28 Circuits, Tin Plated, 2.60mm Tail Length, Glow Wire Capable, Tube
Pre-order
571,200
Factory Lead Time:22-26 weeks
5,712+$1.2625
- +
Ext. Price(USD):$7,211.40
MOQ:5,712
Mult:5,712
SPQ:5,712
Molex
ECAD Model:
Conn Shrouded Header (4 Sides) HDR 12 POS 2mm Solder RA Side Entry Thru-Hole Milli-Grid™ Tube
Pre-order
2,880,000
Factory Lead Time:22-26 weeks
28,800+$0.7875
80,000+$0.675
200,000+$0.6625
- +
Ext. Price(USD):$22,680.00
MOQ:28,800
Mult:28,800
Molex
ECAD Model:
Wire-to-Board Connector HDR 16-Pin 1.25mm Soldering Straight Top Entry SMD T/R
Pre-order
200,000
Factory Lead Time:22-26 weeks
2,000+$1.425
4,000+$1.2625
10,000+$1.2375
- +
Ext. Price(USD):$2,850.00
MOQ:2,000
Mult:2,000
Pre-order
1,260,000
Factory Lead Time:15 weeks
2,520+$0.5101
- +
Ext. Price(USD):$1,285.45
MOQ:2,520
Mult:1,260
SPQ:1,260
Shrouded Header HDR 2 Pos 2mm Solder Straight SMD T/R
Pre-order
1,750,000
Factory Lead Time:22-26 weeks
17,500+$0.65
25,000+$0.5375
1,000,000+$0.36
2,000,000+$0.34
- +
Ext. Price(USD):$11,375.00
MOQ:17,500
Mult:17,500
25 / PageGoto