Other Card Edge Components

Results:

Other card edge components include specialized or supplementary connector products that are not grouped with standard edgeboard connectors, housings, contacts, adapters or accessories. Because products in this category can use different interface and mounting formats, begin with the manufacturer part number and datasheet, identify the actual connector type, and then compare its mating and PCB requirements.

Pass the Part Identity Checkpoint

The category name alone does not define a single connector format. Use the following identification sequence before comparing products or approving a substitute.

1
Capture the Manufacturer Part Number Record the complete part number, manufacturer and product series without removing suffixes.
2
Identify the Actual Connector Type Determine whether the part is a header, socket, card-edge connector or another specialized component.
3
Confirm the Mating Interface Establish whether the product connects to a PCB card edge, another PCB, a cable assembly or a separate connector.
4
Decode the Physical Format Compare positions, rows, pitch, orientation, mounting type and termination method.
5
Verify the Datasheet Confirm the mating drawing, recommended PCB layout, ratings, materials and compatible product series.

Use the Part Number as the Primary Identifier

Product descriptions can be shortened or normalized across distributor databases. The complete manufacturer part number provides the most reliable route to the original drawing and product specification.

Manufacturer + Base Part Number + Prefix and Suffix + Series

Prefixes and suffixes may identify contact finish, packaging, mounting variation, keying or another configuration detail. Compare the complete ordering code when evaluating replacements.

Determine What the Part Connects

Establish the connection path before interpreting positions, pitch or mounting details. Products in this category may serve different interconnection functions.

PCB ↔ PCB
Board connection Confirm the interface on both boards, installed spacing and mating orientation.
PCB ↔ Cable
Wire connection Identify the mating housing, contact system, wire range and termination method.
Card ↔ Host
Card-edge interface Check card thickness, conductive-finger arrangement, insertion geometry and keying.

Decode the Connector Format

Once the product type and mating interface are known, translate the mechanical specification into a comparable set of fields.

Connector type Header, socket, receptacle, card-edge connector or another specified component.
Positions and rows Confirm the total number of electrical positions and how they are distributed across rows.
Pitch Match the center-to-center spacing of contacts or terminals to the mating product and PCB.
Orientation Check straight, vertical, right-angle, top-entry or side-entry configuration as applicable.
Mounting and termination Verify surface mount or through-hole installation and the specified solder or contact termination.

Match the PCB Installation

The connector body may fit the available space while its terminals or recommended footprint remain incompatible with the board. Check the complete installation drawing.

PCB footprint Compare pad or hole locations, terminal pattern, tolerances and keep-out areas.
Installed envelope Check connector height, body width, card approach and surrounding component clearance.
Assembly process Confirm soldering method, mounting hardware, packaging and automated assembly requirements.

Confirm the Mating Component

A compatible pitch and position count do not establish a complete mating match. Use the manufacturer’s drawing or related-products list to verify the opposing connector, housing, contact or PCB interface.

✓ Mating manufacturer part number ✓ Compatible product series ✓ Contact gender and arrangement ✓ Keying and polarization ✓ Engagement and insertion depth ✓ Electrical and temperature ratings

Build a Verifiable Part Identity

Save the identifying and mating information together so that purchasing, engineering and incoming inspection use the same product definition.

Part identity record
Manufacturer + Part number | Connector type | Mating product | Positions × pitch | Mounting

If the required product is already identifiable as a complete edgeboard connector, housing, contact, adapter or accessory, browse Card Edge Connectors & Components to select the corresponding product group.

Read More
Other Card Edge ComponentsResults:
Comprehensive
Price Priority
Stock Priority
Image
Part Number
Description
Availability
Unit Price(USD)
Quantity
Operation
Wire-to-Board HDR, 22 POS, 3mm, Solder, ST Top Entry, Thru-Hole, T/R
Pre-order
675,000
Factory Lead Time:15 weeks
1,350+$3.252
- +
Ext. Price(USD):$4,390.20
MOQ:1,350
Mult:450
SPQ:450
Wire-to-Board HDR 12-Pin 4.2mm Solder Top Entry Thru-Hole T/R
Pre-order
600,000
Factory Lead Time:15 weeks
1,200+$4.6779
- +
Ext. Price(USD):$5,613.48
MOQ:1,200
Mult:1,200
SPQ:400
JST
ECAD Model:
Conn Shrouded Header HDR 9 POS 2mm Solder ST Thru-Hole Box
Pre-order
120,000
Factory Lead Time:18-22 weeks
26+
12,000+$0.0948
36,000+$0.0932
60,000+$0.0908
- +
Ext. Price(USD):$1,137.60
MOQ:12,000
Mult:12,000
SPQ:12,000
Wire-to-Board HDR 22 Pos 4.2mm Solder ST Top Entry TH
Pre-order
540,000
Factory Lead Time:15 weeks
1,080+$1.6365
- +
Ext. Price(USD):$1,767.42
MOQ:1,080
Mult:1,080
SPQ:360
Molex
ECAD Model:
Conn Shrouded Header (4 Sides) M 24 POS 2mm Solder ST Top Entry Thru-Hole Tube
Pre-order
560,000
Factory Lead Time:22-26 weeks
5,600+$1.5125
- +
Ext. Price(USD):$8,470.00
MOQ:5,600
Mult:5,600
SPQ:5,600
Wire-to-Board Connector HDR 18 Pos 3mm Solder Straight Top Entry TH
Pre-order
810,000
Factory Lead Time:15 weeks
1,620+$1.4502
- +
Ext. Price(USD):$2,349.32
MOQ:1,620
Mult:1,620
SPQ:540
Wire-to-Board Connector, Crimp-to-Wire, Vertical Header, 1.27mm Pitch, 6 Pos, SMD
Pre-order
2,500
Factory Lead Time:10-16 weeks
24+
250+$1.4724
500+$1.434
- +
Ext. Price(USD):$368.10
MOQ:250
Mult:250
SPQ:250
Wire-to-Board HDR 6 Pos 3mm Solder ST Top Entry TH T/R
Pre-order
900,000
Factory Lead Time:15 weeks
1,800+$0.914
- +
Ext. Price(USD):$1,645.20
MOQ:1,800
Mult:1,800
SPQ:600
Wire-to-Board Connector HDR 2 Pos 3mm Solder Top Entry Thru-Hole
Pre-order
4,050,000
Factory Lead Time:15 weeks
8,100+$0.3551
- +
Ext. Price(USD):$2,876.31
MOQ:8,100
Mult:2,700
SPQ:2,700
Wire-to-Board Header, 24 Pos, 4.2mm Pitch, Solder, ST Top Entry, Thru-Hole, T/R
Pre-order
450,000
Factory Lead Time:15 weeks
900+$1.2743
- +
Ext. Price(USD):$1,146.87
MOQ:900
Mult:900
SPQ:300
One27 Male Angled
Available Stock
486
Estimated Ship Time:5-7 working days
2+$14.0661
- +
Ext. Price(USD):$28.13
MOQ:2
Mult:1
Molex
ECAD Model:
Shrouded Header (4 Sides) HDR 5 Pos 2mm Solder Straight Thru-Hole Tube
Pre-order
234,000
Factory Lead Time:22-26 weeks
2,340+$0.975
4,680+$0.925
- +
Ext. Price(USD):$2,281.50
MOQ:2,340
Mult:2,340
SPQ:2,340
Pre-order
25,000
Factory Lead Time:22-26 weeks
250+$1.7125
1,000+$1.6
2,500+$1.5
5,000+$1.425
10,000+$1.375
- +
Ext. Price(USD):$428.12
MOQ:250
Mult:250
SPQ:250
JST
ECAD Model:
Shrouded Header, 20 Pos, 2.5mm Pitch, Solder RA, Thru-Hole
Available Stock
30
Estimated Ship Time:4-6 working days
26+
4+$8.8902
- +
Ext. Price(USD):$35.56
MOQ:4
Mult:4
SPQ:1
JST
ECAD Model:
Conn Shrouded Header HDR 8 POS 2mm Solder ST Thru-Hole Box
Available Stock
8,475
Estimated Ship Time:6-7 working days
24+
20+$0.2307
500+$0.0869
- +
Ext. Price(USD):$4.61
MOQ:20
Mult:20
3P RAST 5 Tab Header, TH
Pre-order
200,000
Factory Lead Time:22-26 weeks
2,000+$0.525
4,000+$0.475
50,000+$0.3875
100,000+$0.3375
250,000+$0.3
- +
Ext. Price(USD):$1,050.00
MOQ:2,000
Mult:2,000
SPQ:2,000
Minitek Reg Pwr 4.2 Hcc Wire-to-Board Connector, Single Row Vertical Through Hole Header
Pre-order
2,550,000
Factory Lead Time:15 weeks
5,100+$1.156
- +
Ext. Price(USD):$5,895.60
MOQ:5,100
Mult:5,100
SPQ:1,700
Wire-to-Board Header, 20 Pos, 4.2mm Pitch, Solder, Straight Top Entry Thru-Hole, T/R
Pre-order
450,000
Factory Lead Time:15 weeks
900+$1.0985
- +
Ext. Price(USD):$988.65
MOQ:900
Mult:900
SPQ:300
Wire-to-Board Connector, 4.2mm, Right Angle Through Hole Header
Pre-order
3,150,000
Factory Lead Time:15 weeks
6,300+$1.2082
- +
Ext. Price(USD):$7,611.66
MOQ:6,300
Mult:6,300
SPQ:2,100
Wire-to-Board Header 18-Pin 3mm Solder Straight Top Entry Thru-Hole Tray
Pre-order
810,000
Factory Lead Time:15 weeks
1,620+$2.0873
- +
Ext. Price(USD):$3,381.42
MOQ:1,620
Mult:1,620
SPQ:540
Molex
ECAD Model:
Conn Wire to Board HDR 6 POS 5mm Solder ST Top Entry Thru-Hole Carton
Pre-order
22,500
Factory Lead Time:22-26 weeks
225+$0.6125
900+$0.5875
1,000+$0.575
- +
Ext. Price(USD):$137.81
MOQ:225
Mult:225
SPQ:225
JST
ECAD Model:
Shrouded Header, HDR, 10 Pos, 5.08mm Pitch, Solder, ST, Thru-Hole, Box
Pre-order
8,400
Factory Lead Time:18-22 weeks
26+
840+$1.3493
2,520+$1.3268
4,200+$1.2931
- +
Ext. Price(USD):$1,133.41
MOQ:840
Mult:840
SPQ:840
Wire-to-Board HDR Connector 22 Pos 4.2mm Solder ST Top Entry Thru-Hole T/R
Pre-order
450,000
Factory Lead Time:15 weeks
900+$1.633
- +
Ext. Price(USD):$1,469.70
MOQ:900
Mult:900
SPQ:300
Wire-to-Board HDR 12-Pin 4.2mm Solder Right Angle Side Entry TH
Pre-order
540,000
Factory Lead Time:15 weeks
1,080+$0.8252
- +
Ext. Price(USD):$891.21
MOQ:1,080
Mult:1,080
SPQ:360
Molex
ECAD Model:
Nano-Fit Right-Angle Header, Through Hole, 2.50mm Pitch, Dual Row
Pre-order
150,000
Factory Lead Time:22-26 weeks
1,500+$2.45
4,000+$2.15
10,000+$2.1125
- +
Ext. Price(USD):$3,675.00
MOQ:1,500
Mult:1,500
25 / PageGoto