Other Card Edge Components

Results:

Other card edge components include specialized or supplementary connector products that are not grouped with standard edgeboard connectors, housings, contacts, adapters or accessories. Because products in this category can use different interface and mounting formats, begin with the manufacturer part number and datasheet, identify the actual connector type, and then compare its mating and PCB requirements.

Pass the Part Identity Checkpoint

The category name alone does not define a single connector format. Use the following identification sequence before comparing products or approving a substitute.

1
Capture the Manufacturer Part Number Record the complete part number, manufacturer and product series without removing suffixes.
2
Identify the Actual Connector Type Determine whether the part is a header, socket, card-edge connector or another specialized component.
3
Confirm the Mating Interface Establish whether the product connects to a PCB card edge, another PCB, a cable assembly or a separate connector.
4
Decode the Physical Format Compare positions, rows, pitch, orientation, mounting type and termination method.
5
Verify the Datasheet Confirm the mating drawing, recommended PCB layout, ratings, materials and compatible product series.

Use the Part Number as the Primary Identifier

Product descriptions can be shortened or normalized across distributor databases. The complete manufacturer part number provides the most reliable route to the original drawing and product specification.

Manufacturer + Base Part Number + Prefix and Suffix + Series

Prefixes and suffixes may identify contact finish, packaging, mounting variation, keying or another configuration detail. Compare the complete ordering code when evaluating replacements.

Determine What the Part Connects

Establish the connection path before interpreting positions, pitch or mounting details. Products in this category may serve different interconnection functions.

PCB ↔ PCB
Board connection Confirm the interface on both boards, installed spacing and mating orientation.
PCB ↔ Cable
Wire connection Identify the mating housing, contact system, wire range and termination method.
Card ↔ Host
Card-edge interface Check card thickness, conductive-finger arrangement, insertion geometry and keying.

Decode the Connector Format

Once the product type and mating interface are known, translate the mechanical specification into a comparable set of fields.

Connector type Header, socket, receptacle, card-edge connector or another specified component.
Positions and rows Confirm the total number of electrical positions and how they are distributed across rows.
Pitch Match the center-to-center spacing of contacts or terminals to the mating product and PCB.
Orientation Check straight, vertical, right-angle, top-entry or side-entry configuration as applicable.
Mounting and termination Verify surface mount or through-hole installation and the specified solder or contact termination.

Match the PCB Installation

The connector body may fit the available space while its terminals or recommended footprint remain incompatible with the board. Check the complete installation drawing.

PCB footprint Compare pad or hole locations, terminal pattern, tolerances and keep-out areas.
Installed envelope Check connector height, body width, card approach and surrounding component clearance.
Assembly process Confirm soldering method, mounting hardware, packaging and automated assembly requirements.

Confirm the Mating Component

A compatible pitch and position count do not establish a complete mating match. Use the manufacturer’s drawing or related-products list to verify the opposing connector, housing, contact or PCB interface.

✓ Mating manufacturer part number ✓ Compatible product series ✓ Contact gender and arrangement ✓ Keying and polarization ✓ Engagement and insertion depth ✓ Electrical and temperature ratings

Build a Verifiable Part Identity

Save the identifying and mating information together so that purchasing, engineering and incoming inspection use the same product definition.

Part identity record
Manufacturer + Part number | Connector type | Mating product | Positions × pitch | Mounting

If the required product is already identifiable as a complete edgeboard connector, housing, contact, adapter or accessory, browse Card Edge Connectors & Components to select the corresponding product group.

Read More
Other Card Edge ComponentsResults:
Comprehensive
Price Priority
Stock Priority
Image
Part Number
Description
Availability
Unit Price(USD)
Quantity
Operation
Conn Board Stacker HDR 44 POS 2mm Solder ST Top Entry Thru-Hole Bulk
Available Stock
17
Estimated Ship Time:6-13 working days
1+$7.5555
10+$6.952
500+$5.7024
1,000+$5.3892
- +
Ext. Price(USD):$15.11
MOQ:2
Mult:1
SPQ:1
Header 32 POS 2.54mm Press Fit ST Top Entry TH Tube
Available Stock
38
Estimated Ship Time:6-13 working days
1+$6.44
28+$5.8212
504+$4.2768
1,008+$3.8772
- +
Ext. Price(USD):$19.32
MOQ:3
Mult:1
SPQ:1
Micro Socket Strip, SKT, 6 POS, 1.27mm Pitch, Solder ST Thru-Hole Bulk
Available Stock
86
Estimated Ship Time:6-13 working days
1+$2.001
50+$1.848
2,000+$1.2096
5,000+$1.134
- +
Ext. Price(USD):$14.00
MOQ:7
Mult:1
SPQ:1
Conn Elevated Shrouded Header HDR 10 POS 1.27mm Solder ST Thru-Hole
Available Stock
21
Estimated Ship Time:6-13 working days
1+$7.5555
25+$6.6204
2,500+$3.4236
5,000+$1.4904
- +
Ext. Price(USD):$15.11
MOQ:2
Mult:1
SPQ:1
Conn Socket Terminal Strip HDR/SKT 60 POS 0.5mm Solder RA Side Entry SMD Razor Beam T/R
Available Stock
207
Estimated Ship Time:6-13 working days
1+$16.169
10+$14.6664
375+$10.7892
750+$10.0332
- +
Ext. Price(USD):$16.16
MOQ:1
Mult:1
SPQ:1
Conn Socket Strip HDR 4Power/2Signal POS 4.2mm/2mm Solder ST Top Entry Thru-Hole Tray
Available Stock
150
Estimated Ship Time:7-9 working days
15+
84+$1.32
- +
Ext. Price(USD):$110.88
MOQ:84
Mult:1
SPQ:1
Conn Socket Strip SKT 6 POS 2.54mm Solder ST Top Entry SMD T/R
Available Stock
221
Estimated Ship Time:6-12 working days
1+$0.9474
50+$0.7333
100+$0.6564
200+$0.5923
- +
Ext. Price(USD):$25.57
MOQ:27
Mult:1
Samtec
ECAD Model:
Available Stock
5
Estimated Ship Time:6-13 working days
1+$9.1425
7+$8.371
504+$6.9768
1,001+$6.7392
- +
Ext. Price(USD):$18.28
MOQ:2
Mult:1
SPQ:1
Molex
ECAD Model:
Headers & Wire Housings Micro-Fit+ Vert Header 7 Circuits Black
Available Stock
7,200
Estimated Ship Time:7-9 working days
22+
90+$1.584
270+$1.562
1,440+$1.474
4,000+$1.287
- +
Ext. Price(USD):$142.56
MOQ:90
Mult:1
SPQ:1
Conn Dual Blade Power Header RCP 8Power POS 2mm Solder ST Top Entry Thru-Hole PowerStrip™ T/R
Available Stock
98
Estimated Ship Time:6-13 working days
1+$8.556
200+$8.0352
400+$7.3116
1,000+$5.346
- +
Ext. Price(USD):$17.11
MOQ:2
Mult:1
SPQ:1
Available Stock
400
Estimated Ship Time:5-12 working days
400+$1.7227
800+$1.6478
10,000+$1.3803
15,200+$1.3696
- +
Ext. Price(USD):$689.08
MOQ:400
Mult:1
SPQ:400
.050 SEARAY™ High-Speed High-Density Riser, 85 Ohm
Available Stock
4
Estimated Ship Time:6-13 working days
1+$131.3604
- +
Ext. Price(USD):$131.36
MOQ:1
Mult:1
SPQ:1
Unshrouded Header Connector
Available Stock
215
Estimated Ship Time:5-12 working days
50+$0.6406
250+$0.6112
2,250+$0.4141
3,000+$0.4057
- +
Ext. Price(USD):$32.03
MOQ:50
Mult:1
SPQ:100
Available Stock
19
Estimated Ship Time:6-13 working days
1+$4.1055
50+$3.0456
1,000+$2.3328
2,000+$2.0952
- +
Ext. Price(USD):$16.42
MOQ:4
Mult:1
SPQ:1
CT P/HDR ASSY V 6P W/O KINK NA
Available Stock
10,517
Estimated Ship Time:6-13 working days
10+$0.6061
25+$0.6003
500+$0.4784
5,000+$0.4536
- +
Ext. Price(USD):$14.54
MOQ:24
Mult:1
SPQ:1
Conn Shrouded Header HDR 50 POS 1.27mm Solder ST Top Entry Thru-Hole Tube
Available Stock
10
Estimated Ship Time:6-13 working days
1+$5.612
10+$5.038
1,008+$3.996
2,002+$3.9096
- +
Ext. Price(USD):$16.83
MOQ:3
Mult:1
SPQ:1
Conn Board Stacker HDR 14 POS 1.27mm Solder ST Top Entry SMD FLEX STACK™ Tube
Available Stock
10
Estimated Ship Time:6-13 working days
1+$4.6345
50+$3.0672
1,040+$2.5488
2,015+$2.16
- +
Ext. Price(USD):$18.53
MOQ:4
Mult:1
SPQ:1
Samtec
ECAD Model:
Unshrouded Header HDR 18 POS 2.54mm Solder ST Top Entry Thru-Hole Tube
Available Stock
30
Estimated Ship Time:6-13 working days
1+$6.6355
48+$5.67
504+$4.752
1,008+$4.4388
- +
Ext. Price(USD):$19.90
MOQ:3
Mult:1
SPQ:1
Samtec TSW Series, 2.54mm Pitch, 50-Pin Single Row, Right Angle
Available Stock
19
Estimated Ship Time:6-13 working days
1+$10.212
25+$8.0568
500+$6.3828
1,000+$6.0588
- +
Ext. Price(USD):$20.42
MOQ:2
Mult:1
SPQ:1
Available Stock
6
Estimated Ship Time:6-13 working days
1+$14.329
10+$8.756
500+$7.0956
1,000+$6.804
- +
Ext. Price(USD):$14.32
MOQ:1
Mult:1
SPQ:1
Automotive Connectors 025/090 56POS CAP ASSY H
Available Stock
1,932
Estimated Ship Time:7-9 working days
20+
24+$6.193
54+$6.083
90+$5.973
252+$5.874
- +
Ext. Price(USD):$148.63
MOQ:24
Mult:6
SPQ:6
Conn Board Stacker HDR 10 POS 1.27mm Solder ST Top Entry SMD FLEX STACK™ Tube
Available Stock
15
Estimated Ship Time:6-13 working days
1+$3.1625
50+$2.4192
2,024+$1.5552
5,060+$1.5228
- +
Ext. Price(USD):$15.81
MOQ:5
Mult:1
SPQ:1
Unshrouded Header HDR 18 POS 2.54mm Solder ST Top Entry Thru-Hole Bag
Available Stock
103
Estimated Ship Time:6-13 working days
1+$1.6905
50+$1.595
5,000+$0.9094
10,000+$0.8597
- +
Ext. Price(USD):$15.21
MOQ:9
Mult:1
SPQ:1
JST
ECAD Model:
Disconnectable Crimp Style Connectors, Shrouded Header
Available Stock
2,495
Estimated Ship Time:9-14 working days
10+$0.5281
100+$0.4485
500+$0.4003
1,000+$0.3812
- +
Ext. Price(USD):$26.40
MOQ:50
Mult:1
SPQ:1
Samtec
ECAD Model:
Unshrouded Header HDR, 4 Pos, 2.54mm Pitch, Solder ST Top Entry Thru-Hole
Available Stock
236
Estimated Ship Time:6-13 working days
1+$1.725
500+$1.2312
5,000+$0.9104
10,000+$0.8597
- +
Ext. Price(USD):$15.52
MOQ:9
Mult:1
SPQ:1
25 / PageGoto