Other Card Edge Components

Results:

Other card edge components include specialized or supplementary connector products that are not grouped with standard edgeboard connectors, housings, contacts, adapters or accessories. Because products in this category can use different interface and mounting formats, begin with the manufacturer part number and datasheet, identify the actual connector type, and then compare its mating and PCB requirements.

Pass the Part Identity Checkpoint

The category name alone does not define a single connector format. Use the following identification sequence before comparing products or approving a substitute.

1
Capture the Manufacturer Part Number Record the complete part number, manufacturer and product series without removing suffixes.
2
Identify the Actual Connector Type Determine whether the part is a header, socket, card-edge connector or another specialized component.
3
Confirm the Mating Interface Establish whether the product connects to a PCB card edge, another PCB, a cable assembly or a separate connector.
4
Decode the Physical Format Compare positions, rows, pitch, orientation, mounting type and termination method.
5
Verify the Datasheet Confirm the mating drawing, recommended PCB layout, ratings, materials and compatible product series.

Use the Part Number as the Primary Identifier

Product descriptions can be shortened or normalized across distributor databases. The complete manufacturer part number provides the most reliable route to the original drawing and product specification.

Manufacturer + Base Part Number + Prefix and Suffix + Series

Prefixes and suffixes may identify contact finish, packaging, mounting variation, keying or another configuration detail. Compare the complete ordering code when evaluating replacements.

Determine What the Part Connects

Establish the connection path before interpreting positions, pitch or mounting details. Products in this category may serve different interconnection functions.

PCB ↔ PCB
Board connection Confirm the interface on both boards, installed spacing and mating orientation.
PCB ↔ Cable
Wire connection Identify the mating housing, contact system, wire range and termination method.
Card ↔ Host
Card-edge interface Check card thickness, conductive-finger arrangement, insertion geometry and keying.

Decode the Connector Format

Once the product type and mating interface are known, translate the mechanical specification into a comparable set of fields.

Connector type Header, socket, receptacle, card-edge connector or another specified component.
Positions and rows Confirm the total number of electrical positions and how they are distributed across rows.
Pitch Match the center-to-center spacing of contacts or terminals to the mating product and PCB.
Orientation Check straight, vertical, right-angle, top-entry or side-entry configuration as applicable.
Mounting and termination Verify surface mount or through-hole installation and the specified solder or contact termination.

Match the PCB Installation

The connector body may fit the available space while its terminals or recommended footprint remain incompatible with the board. Check the complete installation drawing.

PCB footprint Compare pad or hole locations, terminal pattern, tolerances and keep-out areas.
Installed envelope Check connector height, body width, card approach and surrounding component clearance.
Assembly process Confirm soldering method, mounting hardware, packaging and automated assembly requirements.

Confirm the Mating Component

A compatible pitch and position count do not establish a complete mating match. Use the manufacturer’s drawing or related-products list to verify the opposing connector, housing, contact or PCB interface.

✓ Mating manufacturer part number ✓ Compatible product series ✓ Contact gender and arrangement ✓ Keying and polarization ✓ Engagement and insertion depth ✓ Electrical and temperature ratings

Build a Verifiable Part Identity

Save the identifying and mating information together so that purchasing, engineering and incoming inspection use the same product definition.

Part identity record
Manufacturer + Part number | Connector type | Mating product | Positions × pitch | Mounting

If the required product is already identifiable as a complete edgeboard connector, housing, contact, adapter or accessory, browse Card Edge Connectors & Components to select the corresponding product group.

Read More
Other Card Edge ComponentsResults:
Comprehensive
Price Priority
Stock Priority
Image
Part Number
Description
Availability
Unit Price(USD)
Quantity
Operation
Unshrouded Header, HDR 6 POS 2.54mm Solder ST Thru-Hole
Available Stock
1,350
Estimated Ship Time:6-13 working days
1+$1.0005
50+$0.7821
1,000+$0.5681
10,000+$0.5616
- +
Ext. Price(USD):$14.00
MOQ:14
Mult:1
SPQ:1
Adam Tech
ECAD Model:
CONN HEADER R/A 5POS 3.96MM
Available Stock
96
Estimated Ship Time:9-14 working days
10+$0.4007
100+$0.3403
5,000+$0.2582
10,000+$0.2458
- +
Ext. Price(USD):$26.04
MOQ:65
Mult:1
SPQ:1
Molex
ECAD Model:
2.00mm (.079) Pitch Sherlock Wire-to-Board
Available Stock
2,400
Estimated Ship Time:7-9 working days
14+
5+$11.66
- +
Ext. Price(USD):$58.30
MOQ:5
Mult:1
SPQ:1
Conn Board Stacker HDR 6 POS 2mm Solder ST Top Entry SMD Layer
Available Stock
104
Estimated Ship Time:7-9 working days
20+
1+$3.971
25+$3.707
50+$3.41
100+$3.102
- +
Ext. Price(USD):$31.76
MOQ:8
Mult:1
SPQ:1
Molex
ECAD Model:
Conn Wire to Board HDR 3 POS 6.35mm Solder ST Thru-Hole Bag
Available Stock
7,000
Estimated Ship Time:7-9 working days
18+
870+$0.1342
2,200+$0.132
4,400+$0.1298
- +
Ext. Price(USD):$116.75
MOQ:870
Mult:1
SPQ:1
multicomp
ECAD Model:
Shrouded Pin Header
Available Stock
4,938
Estimated Ship Time:6-12 working days
200+$0.1092
- +
Ext. Price(USD):$25.00
MOQ:229
Mult:1
Conn Elevated Shrouded Header HDR 40 POS 2.54mm Solder ST Top Entry Thru-Hole
Available Stock
8
Estimated Ship Time:6-13 working days
1+$6.6815
25+$5.9184
500+$4.806
1,000+$4.5684
- +
Ext. Price(USD):$20.04
MOQ:3
Mult:1
SPQ:1
Amphenol
Package:SMD,P=0.8mm
ECAD Model:
Available Stock
208
Estimated Ship Time:6-13 working days
1+$3.082
10+$2.622
1,000+$1.8684
3,000+$1.7604
- +
Ext. Price(USD):$15.41
MOQ:5
Mult:1
SPQ:1
Socket Strip, SKT, 46-Pos, 2.54mm, Solder, ST, Top Entry, Thru-Hole
Available Stock
15
Estimated Ship Time:6-13 working days
1+$9.2115
25+$8.2296
500+$6.4368
1,000+$5.7672
- +
Ext. Price(USD):$18.42
MOQ:2
Mult:1
SPQ:1
Board to Board Connector, 120 Pos, 0.5mm Pitch, Solder, ST Top Entry, SMD, Reel
Available Stock
23
Estimated Ship Time:6-12 working days
1+$10.6423
10+$10.3423
250+$9.7218
500+$9.5154
- +
Ext. Price(USD):$31.92
MOQ:3
Mult:1
Conn Board Stacker HDR 16 POS 2mm Solder ST Top Entry SMD T/R
Available Stock
750
Estimated Ship Time:7-9 working days
17+
125+$3.091
500+$2.772
1,000+$2.288
2,500+$1.749
5,000+$1.485
- +
Ext. Price(USD):$386.37
MOQ:125
Mult:125
SPQ:125
Elevated Shrouded Header, HDR, 40 Pos, 2mm Pitch, Solder, ST, Thru-Hole, Bulk
Available Stock
190
Estimated Ship Time:7-10 working days
21+
1+$20.13
10+$19.063
500+$8.877
1,000+$5.489
- +
Ext. Price(USD):$40.26
MOQ:2
Mult:1
SPQ:1
Connector Socket Strip, SKT, 32 Pos, 2mm Pitch, Solder, ST, Top Entry, SMD, TIGER CLAW™, Tube
Available Stock
16
Estimated Ship Time:6-13 working days
1+$4.508
504+$3.8664
1,008+$3.7584
- +
Ext. Price(USD):$18.03
MOQ:4
Mult:1
SPQ:1
Conn Unshrouded Header HDR 8 POS 2.54mm Solder RA Thru-Hole Automotive Tray
Available Stock
2,199
Estimated Ship Time:7-9 working days
21+
200+$0.572
500+$0.561
1,000+$0.55
2,000+$0.539
- +
Ext. Price(USD):$114.40
MOQ:200
Mult:1
SPQ:1
Conn Unshrouded Header HDR 14 POS 1.27mm Solder ST SMD Bulk
Available Stock
89
Estimated Ship Time:6-13 working days
1+$4.163
50+$3.6288
1,040+$2.4084
2,535+$2.1492
- +
Ext. Price(USD):$16.65
MOQ:4
Mult:1
SPQ:1
Shrouded Header, 5-Pos, 3.81mm Pitch, Solder, ST, TH
Available Stock
747
Estimated Ship Time:5-12 working days
50+$0.9206
250+$0.7154
7,500+$0.5642
10,000+$0.5345
- +
Ext. Price(USD):$46.03
MOQ:50
Mult:1
SPQ:500
Molex
ECAD Model:
RAST 5 Potted HDR 4CKT Tin Green
Available Stock
12,200
Estimated Ship Time:7-9 working days
21+
300+$0.429
700+$0.418
2,800+$0.407
- +
Ext. Price(USD):$128.70
MOQ:300
Mult:1
SPQ:1
Conn Card Edge SKT 40 POS 0.8mm Solder ST SMD EDGE RATE™ T/R
Available Stock
15
Estimated Ship Time:6-13 working days
1+$5.336
25+$4.6764
825+$2.9376
2,475+$2.7756
- +
Ext. Price(USD):$16.00
MOQ:3
Mult:1
SPQ:1
Unshrouded Header HDR 10 POS 1.27mm Solder ST Top Entry Thru-Hole Bulk
Available Stock
865
Estimated Ship Time:5-12 working days
25+$1.1969
250+$1.0707
7,500+$0.5683
10,000+$0.4475
- +
Ext. Price(USD):$31.11
MOQ:26
Mult:1
SPQ:1
Connector, Board Stacker HDR, 2.54mm, Solder Straight, Through Hole
Available Stock
1,200
Estimated Ship Time:6-13 working days
1+$0.2875
100+$0.2496
500+$0.2322
2,000+$0.1382
5,000+$0.1026
- +
Ext. Price(USD):$14.08
MOQ:49
Mult:1
SPQ:1
Amphenol
ECAD Model:
Available Stock
2,489
Estimated Ship Time:6-13 working days
1+$6.693
10+$5.83
500+$3.6612
1,250+$3.3156
- +
Ext. Price(USD):$20.07
MOQ:3
Mult:1
SPQ:1
CONNECTOR, HEADER, 16POS, 2ROW, 2.5MM; Pitch Spacing:2.54mm; No. of Contacts:16Contacts; Gender:Header; Product Range:-; Contact Termination Type:Through Hole; No. of Rows:2Rows; Contact Plating:Gold Plated Contacts; Con
Available Stock
2,207
Estimated Ship Time:6-12 working days
50+$0.3667
100+$0.3449
200+$0.3295
- +
Ext. Price(USD):$25.30
MOQ:69
Mult:1
Conn Board Stacker HDR 20 POS 1.27mm Solder ST Top Entry SMD FLEX STACK™ T/R
Available Stock
375
Estimated Ship Time:7-9 working days
23+
375+$3.553
750+$3.146
1,125+$2.684
2,625+$2.112
5,250+$1.727
- +
Ext. Price(USD):$1,332.37
MOQ:375
Mult:375
SPQ:375
Conn Board Stacker HDR 3 POS 5.08mm Solder ST SMD Layer
Available Stock
482
Estimated Ship Time:5-12 working days
1+$1.6675
250+$1.397
7,500+$0.6729
10,000+$0.53
- +
Ext. Price(USD):$30.01
MOQ:18
Mult:1
SPQ:1
Conn Board Stacker HDR 22 POS 1.27mm Solder ST Top Entry SMD FLEX STACK™ Bulk
Available Stock
52
Estimated Ship Time:6-13 working days
1+$5.221
25+$4.482
1,025+$3.4344
2,501+$3.2616
- +
Ext. Price(USD):$15.66
MOQ:3
Mult:1
SPQ:1
25 / PageGoto