Other Card Edge Components

Results:

Other card edge components include specialized or supplementary connector products that are not grouped with standard edgeboard connectors, housings, contacts, adapters or accessories. Because products in this category can use different interface and mounting formats, begin with the manufacturer part number and datasheet, identify the actual connector type, and then compare its mating and PCB requirements.

Pass the Part Identity Checkpoint

The category name alone does not define a single connector format. Use the following identification sequence before comparing products or approving a substitute.

1
Capture the Manufacturer Part Number Record the complete part number, manufacturer and product series without removing suffixes.
2
Identify the Actual Connector Type Determine whether the part is a header, socket, card-edge connector or another specialized component.
3
Confirm the Mating Interface Establish whether the product connects to a PCB card edge, another PCB, a cable assembly or a separate connector.
4
Decode the Physical Format Compare positions, rows, pitch, orientation, mounting type and termination method.
5
Verify the Datasheet Confirm the mating drawing, recommended PCB layout, ratings, materials and compatible product series.

Use the Part Number as the Primary Identifier

Product descriptions can be shortened or normalized across distributor databases. The complete manufacturer part number provides the most reliable route to the original drawing and product specification.

Manufacturer + Base Part Number + Prefix and Suffix + Series

Prefixes and suffixes may identify contact finish, packaging, mounting variation, keying or another configuration detail. Compare the complete ordering code when evaluating replacements.

Determine What the Part Connects

Establish the connection path before interpreting positions, pitch or mounting details. Products in this category may serve different interconnection functions.

PCB ↔ PCB
Board connection Confirm the interface on both boards, installed spacing and mating orientation.
PCB ↔ Cable
Wire connection Identify the mating housing, contact system, wire range and termination method.
Card ↔ Host
Card-edge interface Check card thickness, conductive-finger arrangement, insertion geometry and keying.

Decode the Connector Format

Once the product type and mating interface are known, translate the mechanical specification into a comparable set of fields.

Connector type Header, socket, receptacle, card-edge connector or another specified component.
Positions and rows Confirm the total number of electrical positions and how they are distributed across rows.
Pitch Match the center-to-center spacing of contacts or terminals to the mating product and PCB.
Orientation Check straight, vertical, right-angle, top-entry or side-entry configuration as applicable.
Mounting and termination Verify surface mount or through-hole installation and the specified solder or contact termination.

Match the PCB Installation

The connector body may fit the available space while its terminals or recommended footprint remain incompatible with the board. Check the complete installation drawing.

PCB footprint Compare pad or hole locations, terminal pattern, tolerances and keep-out areas.
Installed envelope Check connector height, body width, card approach and surrounding component clearance.
Assembly process Confirm soldering method, mounting hardware, packaging and automated assembly requirements.

Confirm the Mating Component

A compatible pitch and position count do not establish a complete mating match. Use the manufacturer’s drawing or related-products list to verify the opposing connector, housing, contact or PCB interface.

✓ Mating manufacturer part number ✓ Compatible product series ✓ Contact gender and arrangement ✓ Keying and polarization ✓ Engagement and insertion depth ✓ Electrical and temperature ratings

Build a Verifiable Part Identity

Save the identifying and mating information together so that purchasing, engineering and incoming inspection use the same product definition.

Part identity record
Manufacturer + Part number | Connector type | Mating product | Positions × pitch | Mounting

If the required product is already identifiable as a complete edgeboard connector, housing, contact, adapter or accessory, browse Card Edge Connectors & Components to select the corresponding product group.

Read More
Other Card Edge ComponentsResults:
Comprehensive
Price Priority
Stock Priority
Image
Part Number
Description
Availability
Unit Price(USD)
Quantity
Operation
Conn Low Profile Terminal Strip HDR 40 POS 0.5mm Solder ST SMD Tube
Available Stock
39
Estimated Ship Time:6-13 working days
1+$4.968
42+$4.4064
504+$4.1148
1,008+$3.8232
- +
Ext. Price(USD):$14.90
MOQ:3
Mult:1
SPQ:1
Molex
ECAD Model:
Conn Shrouded Header (4 Sides) HDR 6 POS 2.5mm Solder RA Thru-Hole Bag
Available Stock
900
Estimated Ship Time:5-12 working days
527+$0.1325
6,000+$0.1201
12,000+$0.1157
30,000+$0.1113
93,000+$0.1081
- +
Ext. Price(USD):$69.82
MOQ:527
Mult:1
SPQ:1
Shrouded Header 18 Pos 4.68mm Solder Right Angle Side Entry Thru-Hole
Available Stock
102
Estimated Ship Time:6-13 working days
1+$32.912
10+$29.0412
100+$24.9804
280+$24.1056
- +
Ext. Price(USD):$32.91
MOQ:1
Mult:1
SPQ:1
Conn Socket Strip SKT 6 POS 1.27mm Solder ST SMD
Available Stock
140
Estimated Ship Time:7-9 working days
23+
75+$1.639
- +
Ext. Price(USD):$122.92
MOQ:75
Mult:75
SPQ:75
Unshrouded Header Connector
Available Stock
1,828
Estimated Ship Time:5-12 working days
100+$1.584
300+$1.551
7,500+$1.3375
10,000+$1.1556
- +
Ext. Price(USD):$158.40
MOQ:100
Mult:100
SPQ:100
Molex
ECAD Model:
1.00mm Pitch Pico Clasp PCB Header Single Row Right Angle SMD 0.10μm Gold Plated Outer Positive Lock 5 Circuits Green
Available Stock
19,500
Estimated Ship Time:7-9 working days
18+
321+$0.1815
4,000+$0.1738
7,000+$0.1672
19,000+$0.1606
- +
Ext. Price(USD):$58.26
MOQ:321
Mult:1
SPQ:1
Amphenol IDC Connector, T812 Series, Receptacle, 12-Pos, 2-Row, 2.54mm Pitch, Wire Mount
Available Stock
600
Estimated Ship Time:5-10 working days
1+$0.9815
10+$0.956
100+$0.9305
500+$0.905
1,000+$0.8795
- +
Ext. Price(USD):$6.87
MOQ:7
Mult:1
Molex
ECAD Model:
Conn IDC RCP 10 POS 1.27mm IDT ST Cable Mount Picoflex® T/R
Available Stock
12,000
Estimated Ship Time:9-14 working days
4,000+$0.3564
- +
Ext. Price(USD):$1,425.60
MOQ:4,000
Mult:4,000
SPQ:1
Molex
ECAD Model:
Conn Ejector Header HDR 30 POS 2.54mm Solder RA Thru-Hole QF-50 Tray
Available Stock
204
Estimated Ship Time:7-9 working days
04+
44+$2.442
- +
Ext. Price(USD):$107.44
MOQ:44
Mult:1
SPQ:1
CONEC
ECAD Model:
DIP Connector, IDC
Available Stock
1,073
Estimated Ship Time:7-9 working days
07+
200+$0.572
500+$0.55
- +
Ext. Price(USD):$114.40
MOQ:200
Mult:1
SPQ:1
Socket Strip SKT 50 POS 1.27mm Solder ST Thru-Hole Tube
Available Stock
8
Estimated Ship Time:6-13 working days
1+$11.339
10+$8.866
504+$6.6528
1,008+$6.2964
- +
Ext. Price(USD):$22.67
MOQ:2
Mult:1
SPQ:1
Conn Unshrouded Header HDR 24 POS 1.27mm Solder ST Top Entry Thru-Hole Tube
Available Stock
60
Estimated Ship Time:6-13 working days
1+$5.451
38+$5.1084
1,026+$3.1212
2,508+$2.9052
- +
Ext. Price(USD):$16.35
MOQ:3
Mult:1
SPQ:1
Shrouded Header (4 Sides), HDR, 18 POS, 4.68mm, Solder, ST Top Entry, Thru-Hole
Available Stock
165
Estimated Ship Time:9-14 working days
1+$18.4788
10+$15.701
210+$12.6659
630+$11.7222
- +
Ext. Price(USD):$36.95
MOQ:2
Mult:1
SPQ:1
Molex
ECAD Model:
Wire-to-Board Connector HDR 4 POS 2.54mm Solder ST Top Entry Thru-Hole Bulk
Available Stock
50
Estimated Ship Time:9-14 working days
50+$10.8
100+$10.584
500+$10.3723
1,000+$10.1649
5,000+$9.9616
- +
Ext. Price(USD):$540.00
MOQ:50
Mult:50
SPQ:1
Pancon
ECAD Model:
Conn Unshrouded Header HDR 4 POS 3.96mm Solder ST Thru-Hole Bag
Available Stock
1,928
Estimated Ship Time:5-12 working days
60+$1.958
100+$1.386
2,250+$0.3017
3,000+$0.2953
- +
Ext. Price(USD):$117.48
MOQ:60
Mult:1
SPQ:500
Available Stock
11,790
Estimated Ship Time:5-12 working days
100+$0.84
300+$0.6703
10,000+$0.4442
15,000+$0.443
- +
Ext. Price(USD):$84.00
MOQ:100
Mult:100
SPQ:100
Unshrouded Header HDR 2 POS 2mm Solder ST Top Entry Thru-Hole
Available Stock
335
Estimated Ship Time:6-13 working days
1+$0.759
50+$0.7073
2,000+$0.2873
5,000+$0.2106
- +
Ext. Price(USD):$14.42
MOQ:19
Mult:1
SPQ:1
TERM BLOCK HDR 8POS 5.08MM
Available Stock
750
Estimated Ship Time:9-14 working days
10+$2.1956
25+$1.9159
1,000+$1.2706
5,000+$1.1574
- +
Ext. Price(USD):$26.34
MOQ:12
Mult:1
SPQ:1
Samtec
ECAD Model:
Low Profile Double Row Assembly
Available Stock
250
Estimated Ship Time:7-9 working days
19+
55+$1.991
150+$1.914
- +
Ext. Price(USD):$109.50
MOQ:55
Mult:1
SPQ:1
Right Angle Cable and Plated Thr
Available Stock
217
Estimated Ship Time:9-14 working days
1+$494.1216
10+$484.2396
50+$474.5628
100+$465.0696
500+$455.7708
- +
Ext. Price(USD):$494.12
MOQ:1
Mult:1
SPQ:1
Conn Unshrouded Header HDR 8 POS 5mm Solder ST Thru-Hole Carton
Available Stock
2,950
Estimated Ship Time:5-12 working days
5+$3.266
25+$3.024
500+$1.001
1,000+$0.9202
- +
Ext. Price(USD):$32.66
MOQ:10
Mult:1
SPQ:50
Conn Shrouded Header HDR 2 POS 1.5mm Solder ST Thru-Hole Box/Tray
Available Stock
16,394
Estimated Ship Time:6-13 working days
25+$0.4658
100+$0.4026
5,500+$0.2711
11,000+$0.2138
- +
Ext. Price(USD):$14.43
MOQ:31
Mult:1
SPQ:1
Unshrouded Header HDR 12 POS 2.54mm Solder ST Thru-Hole
Available Stock
32
Estimated Ship Time:6-13 working days
1+$1.449
50+$1.276
5,000+$0.742
10,000+$0.6145
- +
Ext. Price(USD):$14.49
MOQ:10
Mult:1
SPQ:1
Conn Shrouded Header (4 Sides) HDR 20 POS 1.27mm Solder ST Thru-Hole Bulk
Available Stock
40
Estimated Ship Time:6-13 working days
1+$8.0385
10+$7.678
25+$7.398
50+$6.6312
500+$6.48
- +
Ext. Price(USD):$16.07
MOQ:2
Mult:1
SPQ:1
Unshrouded Header, 8-Pos, 2mm Pitch, Solder, ST Top Entry, Thru-Hole
Available Stock
84
Estimated Ship Time:6-13 working days
1+$0.989
50+$0.9427
5,000+$0.3953
10,000+$0.2689
- +
Ext. Price(USD):$14.83
MOQ:15
Mult:1
SPQ:1
25 / PageGoto