Other Card Edge Components

Results:

Other card edge components include specialized or supplementary connector products that are not grouped with standard edgeboard connectors, housings, contacts, adapters or accessories. Because products in this category can use different interface and mounting formats, begin with the manufacturer part number and datasheet, identify the actual connector type, and then compare its mating and PCB requirements.

Pass the Part Identity Checkpoint

The category name alone does not define a single connector format. Use the following identification sequence before comparing products or approving a substitute.

1
Capture the Manufacturer Part Number Record the complete part number, manufacturer and product series without removing suffixes.
2
Identify the Actual Connector Type Determine whether the part is a header, socket, card-edge connector or another specialized component.
3
Confirm the Mating Interface Establish whether the product connects to a PCB card edge, another PCB, a cable assembly or a separate connector.
4
Decode the Physical Format Compare positions, rows, pitch, orientation, mounting type and termination method.
5
Verify the Datasheet Confirm the mating drawing, recommended PCB layout, ratings, materials and compatible product series.

Use the Part Number as the Primary Identifier

Product descriptions can be shortened or normalized across distributor databases. The complete manufacturer part number provides the most reliable route to the original drawing and product specification.

Manufacturer + Base Part Number + Prefix and Suffix + Series

Prefixes and suffixes may identify contact finish, packaging, mounting variation, keying or another configuration detail. Compare the complete ordering code when evaluating replacements.

Determine What the Part Connects

Establish the connection path before interpreting positions, pitch or mounting details. Products in this category may serve different interconnection functions.

PCB ↔ PCB
Board connection Confirm the interface on both boards, installed spacing and mating orientation.
PCB ↔ Cable
Wire connection Identify the mating housing, contact system, wire range and termination method.
Card ↔ Host
Card-edge interface Check card thickness, conductive-finger arrangement, insertion geometry and keying.

Decode the Connector Format

Once the product type and mating interface are known, translate the mechanical specification into a comparable set of fields.

Connector type Header, socket, receptacle, card-edge connector or another specified component.
Positions and rows Confirm the total number of electrical positions and how they are distributed across rows.
Pitch Match the center-to-center spacing of contacts or terminals to the mating product and PCB.
Orientation Check straight, vertical, right-angle, top-entry or side-entry configuration as applicable.
Mounting and termination Verify surface mount or through-hole installation and the specified solder or contact termination.

Match the PCB Installation

The connector body may fit the available space while its terminals or recommended footprint remain incompatible with the board. Check the complete installation drawing.

PCB footprint Compare pad or hole locations, terminal pattern, tolerances and keep-out areas.
Installed envelope Check connector height, body width, card approach and surrounding component clearance.
Assembly process Confirm soldering method, mounting hardware, packaging and automated assembly requirements.

Confirm the Mating Component

A compatible pitch and position count do not establish a complete mating match. Use the manufacturer’s drawing or related-products list to verify the opposing connector, housing, contact or PCB interface.

✓ Mating manufacturer part number ✓ Compatible product series ✓ Contact gender and arrangement ✓ Keying and polarization ✓ Engagement and insertion depth ✓ Electrical and temperature ratings

Build a Verifiable Part Identity

Save the identifying and mating information together so that purchasing, engineering and incoming inspection use the same product definition.

Part identity record
Manufacturer + Part number | Connector type | Mating product | Positions × pitch | Mounting

If the required product is already identifiable as a complete edgeboard connector, housing, contact, adapter or accessory, browse Card Edge Connectors & Components to select the corresponding product group.

Read More
Other Card Edge ComponentsResults:
Comprehensive
Price Priority
Stock Priority
Image
Part Number
Description
Availability
Unit Price(USD)
Quantity
Operation
Amphenol
ECAD Model:
Conn HDR RCP 5Power/16Signal POS 6.35mm/2.54mm Solder ST Thru-Hole 21 Terminal 1 Port Tray
Available Stock
528
Estimated Ship Time:7-9 working days
23+
21+$5.346
55+$5.137
250+$4.939
- +
Ext. Price(USD):$112.26
MOQ:21
Mult:1
SPQ:1
Samtec
ECAD Model:
IDC Connector, M, 26 POS, 2.54mm, IDT, Right Angle, Cable Mount
Available Stock
10
Estimated Ship Time:9-14 working days
1+$5.2056
10+$4.4248
500+$3.3567
1,000+$3.1995
- +
Ext. Price(USD):$26.02
MOQ:5
Mult:1
SPQ:1
Extreme LPH Power Socket Assembly
Available Stock
26
Estimated Ship Time:6-13 working days
1+$16.675
60+$14.7312
100+$14.7204
- +
Ext. Price(USD):$16.67
MOQ:1
Mult:1
SPQ:1
Conn Wire to Board HDR 22 POS 2.54mm Solder ST Top Entry Thru-Hole Mini Mate®
Available Stock
81
Estimated Ship Time:6-13 working days
1+$9.6715
57+$8.7372
114+$5.1624
513+$5.0436
1,007+$4.6764
- +
Ext. Price(USD):$19.34
MOQ:2
Mult:1
SPQ:1
Conn Socket Strip F 72 POS 2.54mm Solder ST Top Entry Thru-Hole
Available Stock
683
Estimated Ship Time:6-12 working days
1+$6.3385
10+$5.5462
500+$5.3
1,000+$5.1897
- +
Ext. Price(USD):$25.35
MOQ:4
Mult:1
Molex
ECAD Model:
Conn Shrouded Header (4 Sides) HDR 25 POS 3mm Solder ST Thru-Hole Tray
Available Stock
216
Estimated Ship Time:7-9 working days
08+
55+$1.056
- +
Ext. Price(USD):$58.08
MOQ:55
Mult:1
SPQ:1
Molex
ECAD Model:
2.54mm (.100) Pitch QF 50 Header Vertical MIL
Available Stock
736
Estimated Ship Time:7-9 working days
13+
5+$11.66
- +
Ext. Price(USD):$58.30
MOQ:5
Mult:1
SPQ:1
Conn Socket Strip SKT 14 POS 1.27mm Solder ST Top Entry SMD TIGER CLAW™ Tube
Available Stock
58
Estimated Ship Time:6-13 working days
1+$6.164
25+$5.4216
558+$3.9852
1,054+$3.8448
- +
Ext. Price(USD):$18.49
MOQ:3
Mult:1
SPQ:1
Conn Board Stacker HDR 50 POS 1.27mm Solder ST Thru-Hole Tube
Available Stock
456
Estimated Ship Time:7-9 working days
21+
75+$2.651
200+$2.53
- +
Ext. Price(USD):$198.82
MOQ:75
Mult:1
SPQ:1
Pancon
ECAD Model:
Conn Unshrouded Header HDR 10 POS 2.54mm Solder RA Thru-Hole Bag
Available Stock
215
Estimated Ship Time:5-12 working days
50+$0.6406
250+$0.6112
2,250+$0.4141
3,000+$0.4057
- +
Ext. Price(USD):$32.03
MOQ:50
Mult:1
SPQ:100
Conn Shrouded Header (4 Sides) HDR 8Power/40Signal Pos 6.35mm/2.54mm Solder RA Side Entry Thru-Hole PowerStrip™ Tray
Available Stock
42
Estimated Ship Time:6-13 working days
1+$25.7025
12+$23.8788
108+$18.4788
252+$18.0144
- +
Ext. Price(USD):$25.70
MOQ:1
Mult:1
SPQ:1
Available Stock
1,270
Estimated Ship Time:6-13 working days
1+$5.8535
50+$5.0436
100+$4.7196
500+$3.7584
1,450+$3.6936
- +
Ext. Price(USD):$17.56
MOQ:3
Mult:1
SPQ:1
Fine Pitch Connector SKT 30 POS 0.4mm Solder ST SMD T/R
Available Stock
5,400
Estimated Ship Time:7-9 working days
24+
900+$3.19
- +
Ext. Price(USD):$2,871.00
MOQ:900
Mult:900
SPQ:900
Pancon
ECAD Model:
Conn Unshrouded Header HDR 24 POS 3.96mm Solder ST Thru-Hole Bag
Available Stock
1,220
Estimated Ship Time:5-12 working days
100+$2.365
300+$2.1935
7,500+$1.819
10,000+$1.5729
- +
Ext. Price(USD):$236.50
MOQ:100
Mult:100
SPQ:100
Conn Board Stacker HDR 20 POS 2.54mm Solder ST SMD Bag
Available Stock
1,500
Estimated Ship Time:7-9 working days
22+
61+$1.826
273+$1.749
546+$1.683
- +
Ext. Price(USD):$111.38
MOQ:61
Mult:1
SPQ:1
Shrouded Header 18 Pos 4.68mm Solder Right Angle Side Entry Thru-Hole
Available Stock
128
Estimated Ship Time:6-13 working days
1+$28.875
10+$24.2784
100+$20.52
280+$19.278
- +
Ext. Price(USD):$28.87
MOQ:1
Mult:1
SPQ:1
Conn Socket Strip RCP 40 POS 2.54mm Solder ST SMD Tube
Available Stock
153
Estimated Ship Time:7-9 working days
18+
80+$1.54
2,000+$1.54
- +
Ext. Price(USD):$123.20
MOQ:80
Mult:20
SPQ:20
Conn Fine Pitch Connector RCP 60 POS 0.8mm Solder ST SMD Box/Tube
Available Stock
4,583
Estimated Ship Time:5-12 working days
10+$15.521
25+$8.052
500+$3.3384
1,000+$3.2742
- +
Ext. Price(USD):$155.21
MOQ:10
Mult:1
SPQ:16
Available Stock
119
Estimated Ship Time:6-13 working days
1+$1.426
50+$1.32
5,000+$0.6545
10,000+$0.5929
- +
Ext. Price(USD):$14.26
MOQ:10
Mult:1
SPQ:1
multicomp
ECAD Model:
Conn Socket Strip RCP 6 POS 1.27mm Solder RA Thru-Hole
Available Stock
654
Estimated Ship Time:6-12 working days
50+$0.4795
100+$0.459
200+$0.4321
- +
Ext. Price(USD):$25.41
MOQ:53
Mult:1
Samtec
ECAD Model:
Unshrouded Header, 14 Pos, 2.54mm Pitch, Solder, ST Top Entry, TH, Tube
Available Stock
84
Estimated Ship Time:6-13 working days
1+$5.4165
50+$4.1472
93+$3.5964
1,023+$3.0348
2,015+$2.8728
- +
Ext. Price(USD):$16.24
MOQ:3
Mult:1
SPQ:1
Molex
ECAD Model:
1.50mm Pitch, Click Mate PCB Receptacle, Single Row, SMD, Right Angle, Tin Plating, Positive Lock, 4 Circuits, Green
Available Stock
50
Estimated Ship Time:9-14 working days
50+$10.8
100+$10.584
500+$10.3723
1,000+$10.1649
5,000+$9.9616
- +
Ext. Price(USD):$540.00
MOQ:50
Mult:50
SPQ:1
Conn Unshrouded Header HDR 20 POS 1.27mm Solder ST Top Entry Thru-Hole
Available Stock
1,288
Estimated Ship Time:6-12 working days
50+$0.5038
100+$0.4859
- +
Ext. Price(USD):$25.19
MOQ:50
Mult:5
Conn Shrouded Header HDR 5 POS 5mm Solder ST Thru-Hole Strip
Available Stock
675
Estimated Ship Time:5-12 working days
5+$3.473
50+$3.157
1,000+$0.8346
2,500+$0.7918
- +
Ext. Price(USD):$31.25
MOQ:9
Mult:1
SPQ:1
Molex
ECAD Model:
Conn Shrouded Header (4 Sides) HDR 20 POS 2mm Solder RA Side Entry Thru-Hole Automotive Tube
Available Stock
50
Estimated Ship Time:9-14 working days
50+$10.8
100+$10.584
500+$10.3723
1,000+$10.1649
5,000+$9.9616
- +
Ext. Price(USD):$540.00
MOQ:50
Mult:50
SPQ:1
25 / PageGoto