Other Card Edge Components

Results:

Other card edge components include specialized or supplementary connector products that are not grouped with standard edgeboard connectors, housings, contacts, adapters or accessories. Because products in this category can use different interface and mounting formats, begin with the manufacturer part number and datasheet, identify the actual connector type, and then compare its mating and PCB requirements.

Pass the Part Identity Checkpoint

The category name alone does not define a single connector format. Use the following identification sequence before comparing products or approving a substitute.

1
Capture the Manufacturer Part Number Record the complete part number, manufacturer and product series without removing suffixes.
2
Identify the Actual Connector Type Determine whether the part is a header, socket, card-edge connector or another specialized component.
3
Confirm the Mating Interface Establish whether the product connects to a PCB card edge, another PCB, a cable assembly or a separate connector.
4
Decode the Physical Format Compare positions, rows, pitch, orientation, mounting type and termination method.
5
Verify the Datasheet Confirm the mating drawing, recommended PCB layout, ratings, materials and compatible product series.

Use the Part Number as the Primary Identifier

Product descriptions can be shortened or normalized across distributor databases. The complete manufacturer part number provides the most reliable route to the original drawing and product specification.

Manufacturer + Base Part Number + Prefix and Suffix + Series

Prefixes and suffixes may identify contact finish, packaging, mounting variation, keying or another configuration detail. Compare the complete ordering code when evaluating replacements.

Determine What the Part Connects

Establish the connection path before interpreting positions, pitch or mounting details. Products in this category may serve different interconnection functions.

PCB ↔ PCB
Board connection Confirm the interface on both boards, installed spacing and mating orientation.
PCB ↔ Cable
Wire connection Identify the mating housing, contact system, wire range and termination method.
Card ↔ Host
Card-edge interface Check card thickness, conductive-finger arrangement, insertion geometry and keying.

Decode the Connector Format

Once the product type and mating interface are known, translate the mechanical specification into a comparable set of fields.

Connector type Header, socket, receptacle, card-edge connector or another specified component.
Positions and rows Confirm the total number of electrical positions and how they are distributed across rows.
Pitch Match the center-to-center spacing of contacts or terminals to the mating product and PCB.
Orientation Check straight, vertical, right-angle, top-entry or side-entry configuration as applicable.
Mounting and termination Verify surface mount or through-hole installation and the specified solder or contact termination.

Match the PCB Installation

The connector body may fit the available space while its terminals or recommended footprint remain incompatible with the board. Check the complete installation drawing.

PCB footprint Compare pad or hole locations, terminal pattern, tolerances and keep-out areas.
Installed envelope Check connector height, body width, card approach and surrounding component clearance.
Assembly process Confirm soldering method, mounting hardware, packaging and automated assembly requirements.

Confirm the Mating Component

A compatible pitch and position count do not establish a complete mating match. Use the manufacturer’s drawing or related-products list to verify the opposing connector, housing, contact or PCB interface.

✓ Mating manufacturer part number ✓ Compatible product series ✓ Contact gender and arrangement ✓ Keying and polarization ✓ Engagement and insertion depth ✓ Electrical and temperature ratings

Build a Verifiable Part Identity

Save the identifying and mating information together so that purchasing, engineering and incoming inspection use the same product definition.

Part identity record
Manufacturer + Part number | Connector type | Mating product | Positions × pitch | Mounting

If the required product is already identifiable as a complete edgeboard connector, housing, contact, adapter or accessory, browse Card Edge Connectors & Components to select the corresponding product group.

Read More
Other Card Edge ComponentsResults:
Comprehensive
Price Priority
Stock Priority
Image
Part Number
Description
Availability
Unit Price(USD)
Quantity
Operation
CONN HEADER VERT 3POS 1.5MM
Available Stock
8,095
Estimated Ship Time:9-14 working days
100+$0.1005
500+$0.0897
1,000+$0.0854
5,000+$0.0762
10,000+$0.0726
- +
Ext. Price(USD):$26.02
MOQ:259
Mult:1
SPQ:1
PCB SOCKET, SINGLE ROW, 14 PIN,
Available Stock
1,082
Estimated Ship Time:9-14 working days
1+$0.648
500+$0.54
1,000+$0.432
1,500+$0.3672
2,000+$0.3348
- +
Ext. Price(USD):$26.56
MOQ:41
Mult:1
SPQ:1
Conn Shrouded Header (4 Sides) HDR 4 POS 3.5mm Solder Thru-Hole Box
Available Stock
1,350
Estimated Ship Time:7-9 working days
15+
295+$0.374
1,342+$0.352
- +
Ext. Price(USD):$110.33
MOQ:295
Mult:1
SPQ:1
Molex
ECAD Model:
Conn Shrouded Header (4 Sides), HDR 15 POS, 2.5mm, Solder ST Thru-Hole, Bag
Available Stock
1,400
Estimated Ship Time:7-9 working days
11+
266+$0.2189
- +
Ext. Price(USD):$58.22
MOQ:266
Mult:1
SPQ:1
Available Stock
58
Estimated Ship Time:6-13 working days
1+$2.4955
50+$2.013
2,000+$1.1556
5,000+$0.9882
- +
Ext. Price(USD):$14.97
MOQ:6
Mult:1
SPQ:1
WAGO
ECAD Model:
TERM BLOCK HDR 11POS 3.50MM
Available Stock
4
Estimated Ship Time:9-14 working days
1+$8.8884
10+$6.2996
500+$4.115
1,000+$3.9427
- +
Ext. Price(USD):$26.66
MOQ:3
Mult:1
SPQ:1
Aptiv
ECAD Model:
Conn Wire to Board F 38 POS Crimp ST Cable Mount
Available Stock
31
Estimated Ship Time:6-13 working days
1+$5.8765
25+$3.311
1,152+$1.8792
2,592+$1.7712
- +
Ext. Price(USD):$17.62
MOQ:3
Mult:1
SPQ:1
Conn Unshrouded Header HDR 160 POS 2mm Solder ST Top Entry Thru-Hole
Available Stock
1
Estimated Ship Time:6-13 working days
1+$27.692
10+$25.6608
100+$23.166
250+$22.5396
- +
Ext. Price(USD):$27.69
MOQ:1
Mult:1
SPQ:1
Available Stock
336
Estimated Ship Time:6-13 working days
1+$10.8905
10+$9.889
375+$7.3764
750+$7.1064
- +
Ext. Price(USD):$21.78
MOQ:2
Mult:1
SPQ:1
Pancon
ECAD Model:
Available Stock
1,750
Estimated Ship Time:5-12 working days
100+$1.529
300+$1.496
7,500+$1.3054
10,000+$1.2305
- +
Ext. Price(USD):$152.90
MOQ:100
Mult:100
SPQ:100
Conn Open Pin Field Array M 120 POS 1.27mm Solder ST Top Entry SMD T/R
Available Stock
353
Estimated Ship Time:6-13 working days
1+$18.6185
10+$16.7184
250+$12.042
475+$11.9124
- +
Ext. Price(USD):$18.61
MOQ:1
Mult:1
SPQ:1
Conn Unshrouded Header HDR 14 POS 2.54mm Solder ST Top Entry Thru-Hole FLEX STACK
Available Stock
130
Estimated Ship Time:6-13 working days
1+$2.2195
50+$2.101
100+$1.9548
500+$1.3608
- +
Ext. Price(USD):$15.53
MOQ:7
Mult:1
SPQ:1
Molex
ECAD Model:
Header and PCB Receptacle Connector
Available Stock
153
Estimated Ship Time:7-9 working days
13+
4+$17.27
18+$16.577
74+$15.917
- +
Ext. Price(USD):$69.08
MOQ:4
Mult:1
SPQ:1
Amphenol IDC Connector, T812 Series, Receptacle, 12-Pos, 2-Row, 2.54mm Pitch, Wire Mount
Available Stock
1,119
Estimated Ship Time:5-10 working days
1+$1.6188
10+$1.5805
100+$1.5423
500+$1.4913
1,000+$1.4531
- +
Ext. Price(USD):$8.09
MOQ:5
Mult:1
Adam Tech
ECAD Model:
CONN HEADER VERT 12POS 2.54MM
Available Stock
809
Estimated Ship Time:9-14 working days
100+$0.2143
500+$0.1912
1,000+$0.1821
5,000+$0.1625
10,000+$0.1548
- +
Ext. Price(USD):$26.14
MOQ:122
Mult:1
SPQ:1
Adam Tech
ECAD Model:
Wire to Board Connector HDR 8 Pos 2.54mm Solder RA Side Entry TH Bag
Available Stock
484
Estimated Ship Time:9-14 working days
10+$0.4072
100+$0.3455
5,000+$0.2621
10,000+$0.2496
- +
Ext. Price(USD):$26.06
MOQ:64
Mult:1
SPQ:1
Unshrouded Header HDR 6 POS 2.54mm Solder ST Top Entry Thru-Hole
Available Stock
695
Estimated Ship Time:5-12 working days
1+$1.0684
250+$0.9016
5,000+$0.4036
7,500+$0.3926
- +
Ext. Price(USD):$30.98
MOQ:29
Mult:1
SPQ:1
Available Stock
12
Estimated Ship Time:6-13 working days
1+$8.8895
25+$6.9336
500+$5.6484
1,000+$5.2056
- +
Ext. Price(USD):$17.77
MOQ:2
Mult:1
SPQ:1
Headers&Wire Housings IDC RCPT 26P W/STR RLF
Available Stock
109
Estimated Ship Time:7-10 working days
10+
12+$9.295
- +
Ext. Price(USD):$111.54
MOQ:12
Mult:1
SPQ:1
Conn Wire to Board HDR 6 POS 2.54mm Solder ST Top Entry Thru-Hole Mini Mate® Bulk
Available Stock
45
Estimated Ship Time:6-13 working days
1+$4.7265
25+$3.938
1,020+$2.4948
2,516+$2.322
- +
Ext. Price(USD):$14.17
MOQ:3
Mult:1
SPQ:1
Wieland 5.0mm Pitch 6P Pluggable Terminal Block Receptacle, Wiecon Series, 300V, Solder
Available Stock
500
Estimated Ship Time:5-10 working days
10+$1.4365
250+$1.3932
750+$1.3511
2,000+$1.3205
4,000+$1.2925
- +
Ext. Price(USD):$14.36
MOQ:10
Mult:10
Elevated Socket SKT 8 POS 2mm Solder ST Top Entry Thru-Hole
Available Stock
68
Estimated Ship Time:6-13 working days
1+$2.599
50+$2.4084
2,000+$1.4472
5,000+$1.3824
- +
Ext. Price(USD):$15.59
MOQ:6
Mult:1
SPQ:1
Conn Unshrouded Header HDR 4 POS 2.54mm Solder ST Top Entry Thru-Hole BergStik® Bulk
Available Stock
1,500
Estimated Ship Time:7-10 working days
18+
466+$0.2365
- +
Ext. Price(USD):$110.20
MOQ:466
Mult:1
SPQ:1
Samtec
ECAD Model:
Socket Strip SKT 14 POS 2.54mm Solder ST Top Entry Thru-Hole Tube
Available Stock
27
Estimated Ship Time:6-13 working days
1+$9.3265
50+$8.4024
96+$7.398
512+$6.4044
1,024+$6.0048
- +
Ext. Price(USD):$18.65
MOQ:2
Mult:1
SPQ:1
Conn Unshrouded Header HDR 4 POS 5mm Solder ST Top Entry Thru-Hole Carton
Available Stock
17,106
Estimated Ship Time:5-12 working days
20+$0.9085
50+$0.8625
1,000+$0.3454
2,500+$0.3189
- +
Ext. Price(USD):$30.88
MOQ:34
Mult:1
SPQ:50
25 / PageGoto