Other Card Edge Components

Results:

Other card edge components include specialized or supplementary connector products that are not grouped with standard edgeboard connectors, housings, contacts, adapters or accessories. Because products in this category can use different interface and mounting formats, begin with the manufacturer part number and datasheet, identify the actual connector type, and then compare its mating and PCB requirements.

Pass the Part Identity Checkpoint

The category name alone does not define a single connector format. Use the following identification sequence before comparing products or approving a substitute.

1
Capture the Manufacturer Part Number Record the complete part number, manufacturer and product series without removing suffixes.
2
Identify the Actual Connector Type Determine whether the part is a header, socket, card-edge connector or another specialized component.
3
Confirm the Mating Interface Establish whether the product connects to a PCB card edge, another PCB, a cable assembly or a separate connector.
4
Decode the Physical Format Compare positions, rows, pitch, orientation, mounting type and termination method.
5
Verify the Datasheet Confirm the mating drawing, recommended PCB layout, ratings, materials and compatible product series.

Use the Part Number as the Primary Identifier

Product descriptions can be shortened or normalized across distributor databases. The complete manufacturer part number provides the most reliable route to the original drawing and product specification.

Manufacturer + Base Part Number + Prefix and Suffix + Series

Prefixes and suffixes may identify contact finish, packaging, mounting variation, keying or another configuration detail. Compare the complete ordering code when evaluating replacements.

Determine What the Part Connects

Establish the connection path before interpreting positions, pitch or mounting details. Products in this category may serve different interconnection functions.

PCB ↔ PCB
Board connection Confirm the interface on both boards, installed spacing and mating orientation.
PCB ↔ Cable
Wire connection Identify the mating housing, contact system, wire range and termination method.
Card ↔ Host
Card-edge interface Check card thickness, conductive-finger arrangement, insertion geometry and keying.

Decode the Connector Format

Once the product type and mating interface are known, translate the mechanical specification into a comparable set of fields.

Connector type Header, socket, receptacle, card-edge connector or another specified component.
Positions and rows Confirm the total number of electrical positions and how they are distributed across rows.
Pitch Match the center-to-center spacing of contacts or terminals to the mating product and PCB.
Orientation Check straight, vertical, right-angle, top-entry or side-entry configuration as applicable.
Mounting and termination Verify surface mount or through-hole installation and the specified solder or contact termination.

Match the PCB Installation

The connector body may fit the available space while its terminals or recommended footprint remain incompatible with the board. Check the complete installation drawing.

PCB footprint Compare pad or hole locations, terminal pattern, tolerances and keep-out areas.
Installed envelope Check connector height, body width, card approach and surrounding component clearance.
Assembly process Confirm soldering method, mounting hardware, packaging and automated assembly requirements.

Confirm the Mating Component

A compatible pitch and position count do not establish a complete mating match. Use the manufacturer’s drawing or related-products list to verify the opposing connector, housing, contact or PCB interface.

✓ Mating manufacturer part number ✓ Compatible product series ✓ Contact gender and arrangement ✓ Keying and polarization ✓ Engagement and insertion depth ✓ Electrical and temperature ratings

Build a Verifiable Part Identity

Save the identifying and mating information together so that purchasing, engineering and incoming inspection use the same product definition.

Part identity record
Manufacturer + Part number | Connector type | Mating product | Positions × pitch | Mounting

If the required product is already identifiable as a complete edgeboard connector, housing, contact, adapter or accessory, browse Card Edge Connectors & Components to select the corresponding product group.

Read More
Other Card Edge ComponentsResults:
Comprehensive
Price Priority
Stock Priority
Image
Part Number
Description
Availability
Unit Price(USD)
Quantity
Operation
Unshrouded Header HDR 12 POS 2mm Solder ST Top Entry Thru-Hole
Available Stock
25
Estimated Ship Time:6-13 working days
1+$1.4145
50+$1.177
5,000+$0.6523
10,000+$0.4482
- +
Ext. Price(USD):$14.14
MOQ:10
Mult:1
SPQ:1
Shrouded Header (4 Sides), HDR 40 Pos, 2mm Pitch, Solder RA Thru-Hole, Tube
Available Stock
4
Estimated Ship Time:6-13 working days
1+$7.084
22+$6.264
506+$4.7088
1,012+$4.2444
- +
Ext. Price(USD):$14.16
MOQ:2
Mult:1
SPQ:1
Socket Strip Connector, SKT, 20 Pos, 1.27mm Pitch, Solder, ST, SMD, Tube
Available Stock
290
Estimated Ship Time:6-13 working days
1+$7.5325
25+$6.4044
105+$6.0372
525+$4.7736
1,015+$4.4604
- +
Ext. Price(USD):$15.06
MOQ:2
Mult:1
SPQ:1
Available Stock
1,483
Estimated Ship Time:6-13 working days
1+$4.646
50+$4.158
100+$3.9096
500+$3.618
1,450+$3.3696
- +
Ext. Price(USD):$18.58
MOQ:4
Mult:1
SPQ:1
WAGO
ECAD Model:
Pre-order
2,500
Factory Lead Time:4-5 weeks
25+$3.1595
125+$3.1068
250+$3.0278
2,500+$2.9752
- +
Ext. Price(USD):$78.98
MOQ:25
Mult:25
SPQ:25
Conn Board Stacker HDR 26 POS 2mm Solder ST Top Entry SMD
Available Stock
26
Estimated Ship Time:6-13 working days
1+$6.3595
22+$5.8536
506+$4.6224
1,012+$3.9528
- +
Ext. Price(USD):$19.07
MOQ:3
Mult:1
SPQ:1
Amphenol
ECAD Model:
Available Stock
140
Estimated Ship Time:5-12 working days
50+$4.521
100+$4.422
1,320+$3.9697
2,640+$3.8841
- +
Ext. Price(USD):$226.05
MOQ:50
Mult:1
SPQ:660
Conn Board Stacker HDR 16 POS 2.54mm Solder ST Thru-Hole Bag
Available Stock
300
Estimated Ship Time:7-9 working days
21+
51+$2.178
230+$2.079
- +
Ext. Price(USD):$111.07
MOQ:51
Mult:1
SPQ:1
Conn Shrouded Header HDR 40 POS 1.27mm Solder ST Top Entry SMD Tube
Available Stock
125
Estimated Ship Time:7-9 working days
16+
20+$8.294
40+$7.722
60+$7.348
100+$6.292
- +
Ext. Price(USD):$165.88
MOQ:20
Mult:20
SPQ:20
JST
ECAD Model:
Shrouded Header, 7 Pos, 2.5mm Pitch, Solder, ST, Top Entry, Thru-Hole
Available Stock
5,943
Estimated Ship Time:9-14 working days
10+$0.378
250+$0.3011
5,000+$0.2436
10,000+$0.232
- +
Ext. Price(USD):$26.08
MOQ:69
Mult:1
SPQ:1
18 Position Terminal Block Header Female Sockets 0.200 (5.08mm) Vertical Through Hole
Available Stock
18
Estimated Ship Time:7-10 working days
24+
10+$12.001
18+$11.099
- +
Ext. Price(USD):$120.01
MOQ:10
Mult:1
SPQ:1
Available Stock
1,750
Estimated Ship Time:5-12 working days
100+$1.529
300+$1.496
7,500+$1.3054
10,000+$1.2305
- +
Ext. Price(USD):$152.90
MOQ:100
Mult:100
SPQ:100
Wire-to-Board Header, 8-Pos, 3.5mm Pitch, Solder, Right Angle, TH
Available Stock
99
Estimated Ship Time:9-14 working days
10+$2.1308
25+$1.8589
1,000+$1.2284
5,000+$1.1174
- +
Ext. Price(USD):$27.70
MOQ:13
Mult:1
SPQ:1
Samtec
ECAD Model:
Socket Strip SKT 1 Pos Solder ST Top Entry Thru-Hole Tube
Available Stock
569
Estimated Ship Time:6-13 working days
1+$0.575
50+$0.4658
1,135+$0.2765
2,043+$0.2408
- +
Ext. Price(USD):$14.37
MOQ:25
Mult:1
SPQ:1
Pancon
ECAD Model:
Available Stock
120
Estimated Ship Time:5-12 working days
100+$0.8691
300+$0.8404
7,500+$0.7073
10,000+$0.6741
- +
Ext. Price(USD):$86.91
MOQ:100
Mult:100
SPQ:100
PCB Connector
Available Stock
5
Estimated Ship Time:7-9 working days
18+
1+$730.642
2+$716.584
- +
Ext. Price(USD):$730.64
MOQ:1
Mult:1
SPQ:1
Harwin
ECAD Model:
Conn Datamate M 34 POS 2mm Solder RA Side Entry Thru-Hole Tube
Available Stock
1,498
Estimated Ship Time:7-9 working days
19+
30+$4.587
45+$4.4
200+$4.224
500+$4.059
- +
Ext. Price(USD):$137.61
MOQ:30
Mult:1
SPQ:1
Molex
ECAD Model:
IDC Connector F 11 POS 3.96mm IDT RA Cable Mount KK® Bag
Available Stock
1,644
Estimated Ship Time:7-9 working days
10+
90+$0.649
- +
Ext. Price(USD):$58.41
MOQ:90
Mult:1
SPQ:1
Unshrouded Header HDR 10 POS 1.27mm Solder ST Top Entry Thru-Hole Bulk
Available Stock
47
Estimated Ship Time:6-13 working days
1+$2.3805
50+$1.925
100+$1.8036
500+$1.7388
1,000+$1.4688
- +
Ext. Price(USD):$14.28
MOQ:6
Mult:1
SPQ:1
Conn Dual Blade Power Header HDR 6Power POS 2mm Solder ST Top Entry Thru-Hole PowerStrip™ Tube
Available Stock
31
Estimated Ship Time:6-13 working days
1+$7.6705
48+$6.8364
112+$6.5448
512+$5.3892
1,008+$5.0112
- +
Ext. Price(USD):$15.34
MOQ:2
Mult:1
SPQ:1
Samtec
ECAD Model:
Unshrouded Header HDR 36 POS 2.54mm Solder ST Top Entry Thru-Hole Tube
Available Stock
2
Estimated Ship Time:6-13 working days
1+$19.9065
12+$17.496
252+$13.23
504+$13.0896
- +
Ext. Price(USD):$19.90
MOQ:1
Mult:1
SPQ:1
Conn Unshrouded Header HDR 3 POS 5.08mm Solder RA Thru-Hole Bulk
Available Stock
516
Estimated Ship Time:6-13 working days
1+$1.3225
100+$1.0527
5,000+$0.6016
10,000+$0.5195
- +
Ext. Price(USD):$14.54
MOQ:11
Mult:1
SPQ:1
Conn Board Stacker HDR 18 POS 1mm Solder ST SMD Bulk
Available Stock
98
Estimated Ship Time:6-12 working days
1+$4.3494
- +
Ext. Price(USD):$26.09
MOQ:6
Mult:1
Available Stock
194
Estimated Ship Time:6-13 working days
1+$5.8535
10+$5.093
1,050+$3.1968
2,520+$2.9808
- +
Ext. Price(USD):$17.56
MOQ:3
Mult:1
SPQ:1
CONN HEADER VERT 3POS 1.5MM
Available Stock
8,095
Estimated Ship Time:9-14 working days
100+$0.1005
500+$0.0897
1,000+$0.0854
5,000+$0.0762
10,000+$0.0726
- +
Ext. Price(USD):$26.02
MOQ:259
Mult:1
SPQ:1
25 / PageGoto