Other Card Edge Components

Results:

Other card edge components include specialized or supplementary connector products that are not grouped with standard edgeboard connectors, housings, contacts, adapters or accessories. Because products in this category can use different interface and mounting formats, begin with the manufacturer part number and datasheet, identify the actual connector type, and then compare its mating and PCB requirements.

Pass the Part Identity Checkpoint

The category name alone does not define a single connector format. Use the following identification sequence before comparing products or approving a substitute.

1
Capture the Manufacturer Part Number Record the complete part number, manufacturer and product series without removing suffixes.
2
Identify the Actual Connector Type Determine whether the part is a header, socket, card-edge connector or another specialized component.
3
Confirm the Mating Interface Establish whether the product connects to a PCB card edge, another PCB, a cable assembly or a separate connector.
4
Decode the Physical Format Compare positions, rows, pitch, orientation, mounting type and termination method.
5
Verify the Datasheet Confirm the mating drawing, recommended PCB layout, ratings, materials and compatible product series.

Use the Part Number as the Primary Identifier

Product descriptions can be shortened or normalized across distributor databases. The complete manufacturer part number provides the most reliable route to the original drawing and product specification.

Manufacturer + Base Part Number + Prefix and Suffix + Series

Prefixes and suffixes may identify contact finish, packaging, mounting variation, keying or another configuration detail. Compare the complete ordering code when evaluating replacements.

Determine What the Part Connects

Establish the connection path before interpreting positions, pitch or mounting details. Products in this category may serve different interconnection functions.

PCB ↔ PCB
Board connection Confirm the interface on both boards, installed spacing and mating orientation.
PCB ↔ Cable
Wire connection Identify the mating housing, contact system, wire range and termination method.
Card ↔ Host
Card-edge interface Check card thickness, conductive-finger arrangement, insertion geometry and keying.

Decode the Connector Format

Once the product type and mating interface are known, translate the mechanical specification into a comparable set of fields.

Connector type Header, socket, receptacle, card-edge connector or another specified component.
Positions and rows Confirm the total number of electrical positions and how they are distributed across rows.
Pitch Match the center-to-center spacing of contacts or terminals to the mating product and PCB.
Orientation Check straight, vertical, right-angle, top-entry or side-entry configuration as applicable.
Mounting and termination Verify surface mount or through-hole installation and the specified solder or contact termination.

Match the PCB Installation

The connector body may fit the available space while its terminals or recommended footprint remain incompatible with the board. Check the complete installation drawing.

PCB footprint Compare pad or hole locations, terminal pattern, tolerances and keep-out areas.
Installed envelope Check connector height, body width, card approach and surrounding component clearance.
Assembly process Confirm soldering method, mounting hardware, packaging and automated assembly requirements.

Confirm the Mating Component

A compatible pitch and position count do not establish a complete mating match. Use the manufacturer’s drawing or related-products list to verify the opposing connector, housing, contact or PCB interface.

✓ Mating manufacturer part number ✓ Compatible product series ✓ Contact gender and arrangement ✓ Keying and polarization ✓ Engagement and insertion depth ✓ Electrical and temperature ratings

Build a Verifiable Part Identity

Save the identifying and mating information together so that purchasing, engineering and incoming inspection use the same product definition.

Part identity record
Manufacturer + Part number | Connector type | Mating product | Positions × pitch | Mounting

If the required product is already identifiable as a complete edgeboard connector, housing, contact, adapter or accessory, browse Card Edge Connectors & Components to select the corresponding product group.

Read More
Other Card Edge ComponentsResults:
Comprehensive
Price Priority
Stock Priority
Image
Part Number
Description
Availability
Unit Price(USD)
Quantity
Operation
Truck Bus & Off-Road Headers 040/070, 32P HYB HORZ. CAP ASSY
Available Stock
442
Estimated Ship Time:7-9 working days
20+
35+$4.488
100+$4.411
200+$4.323
300+$4.246
- +
Ext. Price(USD):$157.08
MOQ:35
Mult:1
SPQ:1
Available Stock
452
Estimated Ship Time:5-12 working days
70+$3.553
140+$3.52
5,040+$2.8783
7,560+$2.8676
- +
Ext. Price(USD):$248.71
MOQ:70
Mult:70
SPQ:70
Pancon
ECAD Model:
Unshrouded Header, HDR, 10 Pos, 3.96mm Pitch, Solder, ST, Thru-Hole, Bag
Available Stock
4,900
Estimated Ship Time:5-12 working days
100+$0.924
300+$0.8789
7,500+$0.7041
10,000+$0.5832
- +
Ext. Price(USD):$92.40
MOQ:100
Mult:100
SPQ:100
Conn Board Stacker HDR 4 POS 2mm Solder ST Top Entry Thru-Hole
Available Stock
134
Estimated Ship Time:6-13 working days
1+$1.8975
50+$1.661
5,000+$0.6934
10,000+$0.6318
- +
Ext. Price(USD):$15.18
MOQ:8
Mult:1
SPQ:1
2.54mm Pitch Production IC Socket, 1A Current Rating
Available Stock
158
Estimated Ship Time:5-10 working days
1+$4.4357
5+$4.3719
15+$4.2827
50+$4.219
100+$4.0915
- +
Ext. Price(USD):$8.87
MOQ:2
Mult:1
Conn Board Stacker HDR 45 POS 2mm Solder ST Top Entry Thru-Hole Layer
Available Stock
33
Estimated Ship Time:7-9 working days
20+
1+$7.381
10+$7.062
25+$6.6
- +
Ext. Price(USD):$36.90
MOQ:5
Mult:1
SPQ:1
Pre-order
10,000
Factory Lead Time:4-5 weeks
100+$0.8476
500+$0.8335
1,000+$0.8123
10,000+$0.7982
- +
Ext. Price(USD):$84.76
MOQ:100
Mult:100
SPQ:100
Conn Unshrouded Header HDR 20 POS 5.08mm Solder RA Side Entry Thru-Hole Bulk
Available Stock
45
Estimated Ship Time:6-13 working days
1+$5.267
50+$3.8988
1,000+$2.8404
2,000+$2.8296
- +
Ext. Price(USD):$15.80
MOQ:3
Mult:1
SPQ:1
Adafruit
ECAD Model:
Conn Socket Strip SKT 40 POS 2.54mm Solder ST Top Entry SMD
Available Stock
374
Estimated Ship Time:6-13 working days
1+$2.2425
- +
Ext. Price(USD):$15.69
MOQ:7
Mult:1
SPQ:1
Conn Micro Socket Strip SKT 20 POS 1.27mm Solder ST Thru-Hole Tube
Available Stock
26
Estimated Ship Time:6-13 working days
1+$4.4965
22+$4.246
1,012+$3.294
2,508+$3.1104
- +
Ext. Price(USD):$17.98
MOQ:4
Mult:1
SPQ:1
Unshrouded Header HDR 26 POS 2.54mm Solder RA Thru-Hole Automotive Tray
Available Stock
787
Estimated Ship Time:7-9 working days
19+
40+$2.816
150+$2.706
500+$2.596
- +
Ext. Price(USD):$112.64
MOQ:40
Mult:1
SPQ:1
Samtec
ECAD Model:
Socket Strip SKT 28 POS 2.54mm Solder ST Top Entry Thru-Hole Board
Available Stock
24
Estimated Ship Time:6-13 working days
1+$8.7515
25+$6.7284
500+$4.9572
1,000+$4.8168
- +
Ext. Price(USD):$17.50
MOQ:2
Mult:1
SPQ:1
Wire to Board Connector HDR 3 POS 3.81mm Solder Straight Thru-Hole Carton
Available Stock
33
Estimated Ship Time:5-12 working days
5+$3.45
50+$3.135
1,000+$0.7704
2,500+$0.7276
- +
Ext. Price(USD):$31.05
MOQ:9
Mult:1
SPQ:100
Available Stock
5
Estimated Ship Time:6-13 working days
1+$3.3235
25+$3.08
1,000+$2.2464
2,500+$2.0844
- +
Ext. Price(USD):$16.61
MOQ:5
Mult:1
SPQ:1
2.0mm Pitch 4-Pin Dual Row Header, WR-PHD Series, Right Angle
Available Stock
90
Estimated Ship Time:5-10 working days
5+$1.165
100+$1.1446
200+$1.1242
- +
Ext. Price(USD):$11.65
MOQ:10
Mult:5
Available Stock
581
Estimated Ship Time:5-12 working days
25+$3.2032
250+$3.0495
2,250+$1.1342
3,000+$1.1128
- +
Ext. Price(USD):$80.08
MOQ:25
Mult:1
SPQ:100
Conn Unshrouded Header HDR 6 POS 2.54mm Press Fit ST Top Entry Thru-Hole Tube
Available Stock
7
Estimated Ship Time:6-13 working days
1+$5.1865
37+$3.3372
1,036+$2.106
2,516+$2.0736
- +
Ext. Price(USD):$15.55
MOQ:3
Mult:1
SPQ:1
Elevated Shrouded Header, HDR, 10-Pos, 2mm Pitch, Solder, ST, Thru-Hole
Available Stock
25
Estimated Ship Time:6-13 working days
1+$6.8885
10+$6.578
500+$4.59
1,000+$4.3632
- +
Ext. Price(USD):$20.66
MOQ:3
Mult:1
SPQ:1
Conn Board Stacker HDR 4 POS 2mm Solder ST Top Entry SMD
Available Stock
197
Estimated Ship Time:6-13 working days
1+$0.9315
50+$0.8756
5,000+$0.311
10,000+$0.2376
- +
Ext. Price(USD):$14.90
MOQ:16
Mult:1
SPQ:1
Unshrouded Header HDR VT SMT
Available Stock
1,215
Estimated Ship Time:6-13 working days
1+$1.932
10+$1.6905
250+$1.2852
500+$1.0703
- +
Ext. Price(USD):$15.45
MOQ:8
Mult:1
SPQ:1
Wire-to-Board Header 6 Pos 4.2mm Solder Straight Top Entry Thru-Hole T/R
Available Stock
1,400
Estimated Ship Time:5-12 working days
500+$0.3565
1,000+$0.3556
15,000+$0.2994
25,000+$0.2957
- +
Ext. Price(USD):$178.25
MOQ:500
Mult:500
SPQ:500
Molex
ECAD Model:
1.0 W/B Wafer Assy 5CktEmbsTpPkgOrn
Available Stock
8,800
Estimated Ship Time:7-9 working days
17+
304+$0.1925
4,000+$0.1859
7,000+$0.1771
- +
Ext. Price(USD):$58.52
MOQ:304
Mult:1
SPQ:1
Conn Shrouded Header (4 Sides) HDR 70 POS 1.27mm Solder ST Top Entry Thru-Hole TIGER EYE™ Tube
Available Stock
79
Estimated Ship Time:9-14 working days
1+$32.162
- +
Ext. Price(USD):$32.16
MOQ:1
Mult:1
SPQ:1
Available Stock
182
Estimated Ship Time:5-12 working days
10+$3.6455
50+$2.871
5,000+$1.7655
7,500+$1.7548
- +
Ext. Price(USD):$36.45
MOQ:10
Mult:1
SPQ:1
Conn Shrouded Header HDR 12 POS 2.54mm Solder RA Side Entry Thru-Hole Bulk
Available Stock
59
Estimated Ship Time:6-13 working days
1+$5.8535
10+$5.313
510+$3.78
1,020+$3.7044
- +
Ext. Price(USD):$17.56
MOQ:3
Mult:1
SPQ:1
25 / PageGoto