Other Card Edge Components

Results:

Other card edge components include specialized or supplementary connector products that are not grouped with standard edgeboard connectors, housings, contacts, adapters or accessories. Because products in this category can use different interface and mounting formats, begin with the manufacturer part number and datasheet, identify the actual connector type, and then compare its mating and PCB requirements.

Pass the Part Identity Checkpoint

The category name alone does not define a single connector format. Use the following identification sequence before comparing products or approving a substitute.

1
Capture the Manufacturer Part Number Record the complete part number, manufacturer and product series without removing suffixes.
2
Identify the Actual Connector Type Determine whether the part is a header, socket, card-edge connector or another specialized component.
3
Confirm the Mating Interface Establish whether the product connects to a PCB card edge, another PCB, a cable assembly or a separate connector.
4
Decode the Physical Format Compare positions, rows, pitch, orientation, mounting type and termination method.
5
Verify the Datasheet Confirm the mating drawing, recommended PCB layout, ratings, materials and compatible product series.

Use the Part Number as the Primary Identifier

Product descriptions can be shortened or normalized across distributor databases. The complete manufacturer part number provides the most reliable route to the original drawing and product specification.

Manufacturer + Base Part Number + Prefix and Suffix + Series

Prefixes and suffixes may identify contact finish, packaging, mounting variation, keying or another configuration detail. Compare the complete ordering code when evaluating replacements.

Determine What the Part Connects

Establish the connection path before interpreting positions, pitch or mounting details. Products in this category may serve different interconnection functions.

PCB ↔ PCB
Board connection Confirm the interface on both boards, installed spacing and mating orientation.
PCB ↔ Cable
Wire connection Identify the mating housing, contact system, wire range and termination method.
Card ↔ Host
Card-edge interface Check card thickness, conductive-finger arrangement, insertion geometry and keying.

Decode the Connector Format

Once the product type and mating interface are known, translate the mechanical specification into a comparable set of fields.

Connector type Header, socket, receptacle, card-edge connector or another specified component.
Positions and rows Confirm the total number of electrical positions and how they are distributed across rows.
Pitch Match the center-to-center spacing of contacts or terminals to the mating product and PCB.
Orientation Check straight, vertical, right-angle, top-entry or side-entry configuration as applicable.
Mounting and termination Verify surface mount or through-hole installation and the specified solder or contact termination.

Match the PCB Installation

The connector body may fit the available space while its terminals or recommended footprint remain incompatible with the board. Check the complete installation drawing.

PCB footprint Compare pad or hole locations, terminal pattern, tolerances and keep-out areas.
Installed envelope Check connector height, body width, card approach and surrounding component clearance.
Assembly process Confirm soldering method, mounting hardware, packaging and automated assembly requirements.

Confirm the Mating Component

A compatible pitch and position count do not establish a complete mating match. Use the manufacturer’s drawing or related-products list to verify the opposing connector, housing, contact or PCB interface.

✓ Mating manufacturer part number ✓ Compatible product series ✓ Contact gender and arrangement ✓ Keying and polarization ✓ Engagement and insertion depth ✓ Electrical and temperature ratings

Build a Verifiable Part Identity

Save the identifying and mating information together so that purchasing, engineering and incoming inspection use the same product definition.

Part identity record
Manufacturer + Part number | Connector type | Mating product | Positions × pitch | Mounting

If the required product is already identifiable as a complete edgeboard connector, housing, contact, adapter or accessory, browse Card Edge Connectors & Components to select the corresponding product group.

Read More
Other Card Edge ComponentsResults:
Comprehensive
Price Priority
Stock Priority
Image
Part Number
Description
Availability
Unit Price(USD)
Quantity
Operation
Amphenol
Package:SMD,P=0.8mm
ECAD Model:
60 Position Connector Plug Outer Shroud Contacts Surface Mount Gold
Available Stock
985
Estimated Ship Time:7-9 working days
21+
500+$1.529
- +
Ext. Price(USD):$764.50
MOQ:500
Mult:500
SPQ:500
Conn Open Pin Field Array F 120 POS 1.27mm Solder ST Top Entry SMD LP Array™ T/R
Available Stock
381
Estimated Ship Time:6-13 working days
1+$16.5485
10+$14.8608
250+$9.7632
500+$9.7632
- +
Ext. Price(USD):$16.54
MOQ:1
Mult:1
SPQ:1
FLEXIBLE SURFACE MOUNT BOARD STA
Available Stock
55
Estimated Ship Time:9-14 working days
1+$4.4496
25+$4.1688
50+$4.0649
- +
Ext. Price(USD):$26.69
MOQ:6
Mult:1
SPQ:1
Adafruit
ECAD Model:
0.1 Pitch 36-Pin Strip Right-Angle Female/Socket Header (5 Pack)
Available Stock
6
Estimated Ship Time:6-13 working days
1+$5.6925
- +
Ext. Price(USD):$17.07
MOQ:3
Mult:1
SPQ:1
Connector Header Unshrouded HDR 40 Pos 2mm Solder Straight Top Entry Thru-Hole
Available Stock
177
Estimated Ship Time:9-14 working days
1+$12.441
- +
Ext. Price(USD):$37.32
MOQ:3
Mult:1
SPQ:1
Conn One Piece Interface PIN 5 POS 1mm Solder ST SMD Tube
Available Stock
58
Estimated Ship Time:6-13 working days
1+$5.06
25+$4.374
1,060+$2.8836
2,544+$2.3868
- +
Ext. Price(USD):$15.18
MOQ:3
Mult:1
SPQ:1
Board to Board Receptacle AMPMODU 2mm
Available Stock
2,400
Estimated Ship Time:7-9 working days
20+
1,200+$3.036
- +
Ext. Price(USD):$3,643.20
MOQ:1,200
Mult:1,200
SPQ:1,200
Conn Unshrouded Header HDR 26 POS 2.54mm Press Fit ST Top Entry Thru-Hole Tube
Available Stock
93
Estimated Ship Time:6-13 working days
1+$5.6925
17+$5.357
1,003+$3.4452
2,516+$3.0672
- +
Ext. Price(USD):$17.07
MOQ:3
Mult:1
SPQ:1
Crimp Header Receptacle Fan Connector Cable End Terminal 1.25mm Pitch Matte Tin AWG 26-28
Available Stock
99,400
Estimated Ship Time:6-13 working days
250+$0.0529
1,000+$0.0451
2,500+$0.0429
5,000+$0.04
10,000+$0.0378
- +
Ext. Price(USD):$14.01
MOQ:265
Mult:1
SPQ:1
Conn Unshrouded Header HDR 14 POS 2.54mm Solder RA Thru-Hole Automotive Tray
Available Stock
209
Estimated Ship Time:5-12 working days
25+$1.61
100+$1.3772
5,000+$0.9138
7,500+$0.902
- +
Ext. Price(USD):$40.25
MOQ:25
Mult:25
SPQ:25
Conn Unshrouded Header HDR 4 POS 5.08mm Solder ST Top Entry Thru-Hole Bulk
Available Stock
24
Estimated Ship Time:6-13 working days
1+$1.058
50+$0.7931
5,000+$0.5357
10,000+$0.4072
- +
Ext. Price(USD):$14.81
MOQ:14
Mult:1
SPQ:1
Connector Board Stacker HDR, 2mm Pitch
Available Stock
500
Estimated Ship Time:7-10 working days
21+
1+$4.147
25+$3.883
2,500+$1.65
5,000+$1.276
- +
Ext. Price(USD):$33.17
MOQ:8
Mult:1
SPQ:1
Elevated Shrouded Header, HDR, 14 POS, 2mm Pitch, ST Thru-Hole
Available Stock
10
Estimated Ship Time:6-13 working days
1+$4.347
50+$3.6612
1,000+$2.9484
2,000+$2.8296
- +
Ext. Price(USD):$17.38
MOQ:4
Mult:1
SPQ:1
Molex
ECAD Model:
Conn Board to Board RCP 66 POS 2mm/5.5mm Press Fit ST Thru-Hole Tray
Available Stock
560
Estimated Ship Time:7-9 working days
16+
20+$6.578
45+$6.446
90+$6.336
200+$6.204
- +
Ext. Price(USD):$131.56
MOQ:20
Mult:1
SPQ:1
V23535B1780C400=BKLEV413 VERBI
Available Stock
3,514
Estimated Ship Time:7-9 working days
14+
95+$1.177
250+$1.155
500+$1.133
950+$1.111
- +
Ext. Price(USD):$111.81
MOQ:95
Mult:1
SPQ:1
Pancon
ECAD Model:
Conn IDC Connector F 9 POS 3.96mm IDT RA Cable Mount Bag
Available Stock
1,375
Estimated Ship Time:5-12 working days
25+$1.2857
50+$1.2488
750+$0.8314
1,000+$0.8143
- +
Ext. Price(USD):$32.14
MOQ:25
Mult:1
SPQ:100
Unshrouded Header, 64 POS 2.54mm Solder ST Top Entry TH Bulk
Available Stock
23
Estimated Ship Time:6-13 working days
1+$4.1285
50+$3.564
1,000+$2.6352
2,500+$2.3652
- +
Ext. Price(USD):$16.51
MOQ:4
Mult:1
SPQ:1
Molex
ECAD Model:
HDAC64 DR V HDR TUBE 20 CKT BLAC
Available Stock
50
Estimated Ship Time:9-14 working days
50+$15.9646
100+$15.6452
500+$15.3323
1,000+$15.0257
5,000+$14.7252
- +
Ext. Price(USD):$798.23
MOQ:50
Mult:50
SPQ:1
Pancon
ECAD Model:
IDC Connector F 6 POS 2.54mm IDT RA Cable Mount Bag
Available Stock
5,411
Estimated Ship Time:5-12 working days
100+$0.5038
500+$0.4413
10,000+$0.3003
15,000+$0.292
- +
Ext. Price(USD):$50.38
MOQ:100
Mult:100
SPQ:100
JST
ECAD Model:
Conn Shrouded Header HDR 8 POS 3.81mm Solder ST Thru-Hole Box
Available Stock
15
Estimated Ship Time:5-10 working days
5+$3.6862
30+$3.6046
60+$3.5281
- +
Ext. Price(USD):$18.43
MOQ:5
Mult:5
Available Stock
408
Estimated Ship Time:6-13 working days
1+$1.886
50+$1.496
5,040+$0.6923
10,010+$0.6653
- +
Ext. Price(USD):$15.08
MOQ:8
Mult:1
SPQ:1
Molex
ECAD Model:
Conn Shrouded Header (4 Sides) HDR 8 POS 2mm Solder ST Top Entry SMD Bag
Available Stock
955
Estimated Ship Time:9-14 working days
10+$1.728
100+$1.4683
- +
Ext. Price(USD):$27.64
MOQ:16
Mult:1
SPQ:1
Available Stock
70
Estimated Ship Time:6-13 working days
1+$3.8295
50+$3.0996
1,000+$2.0196
2,000+$1.89
- +
Ext. Price(USD):$15.31
MOQ:4
Mult:1
SPQ:1
Power to the Board 377-0080-11131A=TA CONN
Available Stock
144
Estimated Ship Time:7-9 working days
25+
5+$22.396
23+$21.461
45+$20.603
- +
Ext. Price(USD):$111.98
MOQ:5
Mult:1
SPQ:1
Conn Board Stacker HDR 20 POS 0.8mm Solder ST SMD Tube
Available Stock
135
Estimated Ship Time:7-9 working days
20+
73+$6.072
- +
Ext. Price(USD):$443.25
MOQ:73
Mult:73
SPQ:73
25 / PageGoto