Other Card Edge Components

Results:

Other card edge components include specialized or supplementary connector products that are not grouped with standard edgeboard connectors, housings, contacts, adapters or accessories. Because products in this category can use different interface and mounting formats, begin with the manufacturer part number and datasheet, identify the actual connector type, and then compare its mating and PCB requirements.

Pass the Part Identity Checkpoint

The category name alone does not define a single connector format. Use the following identification sequence before comparing products or approving a substitute.

1
Capture the Manufacturer Part Number Record the complete part number, manufacturer and product series without removing suffixes.
2
Identify the Actual Connector Type Determine whether the part is a header, socket, card-edge connector or another specialized component.
3
Confirm the Mating Interface Establish whether the product connects to a PCB card edge, another PCB, a cable assembly or a separate connector.
4
Decode the Physical Format Compare positions, rows, pitch, orientation, mounting type and termination method.
5
Verify the Datasheet Confirm the mating drawing, recommended PCB layout, ratings, materials and compatible product series.

Use the Part Number as the Primary Identifier

Product descriptions can be shortened or normalized across distributor databases. The complete manufacturer part number provides the most reliable route to the original drawing and product specification.

Manufacturer + Base Part Number + Prefix and Suffix + Series

Prefixes and suffixes may identify contact finish, packaging, mounting variation, keying or another configuration detail. Compare the complete ordering code when evaluating replacements.

Determine What the Part Connects

Establish the connection path before interpreting positions, pitch or mounting details. Products in this category may serve different interconnection functions.

PCB ↔ PCB
Board connection Confirm the interface on both boards, installed spacing and mating orientation.
PCB ↔ Cable
Wire connection Identify the mating housing, contact system, wire range and termination method.
Card ↔ Host
Card-edge interface Check card thickness, conductive-finger arrangement, insertion geometry and keying.

Decode the Connector Format

Once the product type and mating interface are known, translate the mechanical specification into a comparable set of fields.

Connector type Header, socket, receptacle, card-edge connector or another specified component.
Positions and rows Confirm the total number of electrical positions and how they are distributed across rows.
Pitch Match the center-to-center spacing of contacts or terminals to the mating product and PCB.
Orientation Check straight, vertical, right-angle, top-entry or side-entry configuration as applicable.
Mounting and termination Verify surface mount or through-hole installation and the specified solder or contact termination.

Match the PCB Installation

The connector body may fit the available space while its terminals or recommended footprint remain incompatible with the board. Check the complete installation drawing.

PCB footprint Compare pad or hole locations, terminal pattern, tolerances and keep-out areas.
Installed envelope Check connector height, body width, card approach and surrounding component clearance.
Assembly process Confirm soldering method, mounting hardware, packaging and automated assembly requirements.

Confirm the Mating Component

A compatible pitch and position count do not establish a complete mating match. Use the manufacturer’s drawing or related-products list to verify the opposing connector, housing, contact or PCB interface.

✓ Mating manufacturer part number ✓ Compatible product series ✓ Contact gender and arrangement ✓ Keying and polarization ✓ Engagement and insertion depth ✓ Electrical and temperature ratings

Build a Verifiable Part Identity

Save the identifying and mating information together so that purchasing, engineering and incoming inspection use the same product definition.

Part identity record
Manufacturer + Part number | Connector type | Mating product | Positions × pitch | Mounting

If the required product is already identifiable as a complete edgeboard connector, housing, contact, adapter or accessory, browse Card Edge Connectors & Components to select the corresponding product group.

Read More
Other Card Edge ComponentsResults:
Comprehensive
Price Priority
Stock Priority
Image
Part Number
Description
Availability
Unit Price(USD)
Quantity
Operation
Molex
ECAD Model:
KK 100 HDR FLAT VERT TIN 09 CKT
Available Stock
51
Estimated Ship Time:9-14 working days
50+$10.8
100+$10.584
500+$10.3723
1,000+$10.1649
5,000+$9.9616
- +
Ext. Price(USD):$540.00
MOQ:50
Mult:50
SPQ:1
Adam Tech
ECAD Model:
CONN RCPT HSG 6POS 2.50MM
Available Stock
1,257
Estimated Ship Time:9-14 working days
300+$0.0713
500+$0.0688
1,000+$0.0655
2,500+$0.0614
- +
Ext. Price(USD):$26.02
MOQ:365
Mult:1
SPQ:1
Unshrouded Header, HDR, 80 POS, 2.54mm, Solder RA Side Entry, Thru-Hole
Available Stock
5
Estimated Ship Time:6-13 working days
1+$6.4285
10+$6.039
1,000+$4.0284
2,000+$3.6288
- +
Ext. Price(USD):$19.28
MOQ:3
Mult:1
SPQ:1
Conn Board Stacker HDR 20 POS 2mm Solder ST Top Entry Thru-Hole Bulk
Available Stock
50
Estimated Ship Time:6-13 working days
1+$3.6225
25+$3.432
1,000+$2.3112
2,500+$2.0304
- +
Ext. Price(USD):$14.49
MOQ:4
Mult:1
SPQ:1
Conn Board Stacker HDR 2 POS 2mm Solder ST Top Entry SMD
Available Stock
284
Estimated Ship Time:6-13 working days
1+$0.759
50+$0.583
5,000+$0.2236
10,000+$0.1706
- +
Ext. Price(USD):$14.42
MOQ:19
Mult:1
SPQ:1
Samtec TSW Series, 2.54mm Pitch, 50-Pin Single Row, Right Angle
Available Stock
60
Estimated Ship Time:6-13 working days
1+$2.668
50+$2.1816
2,000+$1.5768
5,000+$1.5444
- +
Ext. Price(USD):$16.00
MOQ:6
Mult:1
SPQ:1
Molex
ECAD Model:
Conn Unshrouded Header HDR 26 POS 2mm Solder RA Thru-Hole Milli-Grid™ Tube
Available Stock
64
Estimated Ship Time:5-12 working days
11+$13.211
25+$5.258
1,000+$1.9474
5,000+$1.712
- +
Ext. Price(USD):$145.32
MOQ:11
Mult:1
SPQ:1
Conn Board Stacker HDR 20 POS 2mm Solder ST Top Entry SMD Tube
Available Stock
8
Estimated Ship Time:6-13 working days
1+$3.726
28+$3.355
1,008+$2.2464
2,520+$1.9548
- +
Ext. Price(USD):$14.90
MOQ:4
Mult:1
SPQ:1
Samtec
ECAD Model:
Unshrouded Header, HDR, 10 Pos, 2.54mm Pitch, Solder, ST Top Entry, Thru-Hole, Tube
Available Stock
75
Estimated Ship Time:6-13 working days
1+$12.5005
44+$9.9684
88+$8.0892
528+$7.5492
1,012+$7.1496
- +
Ext. Price(USD):$25.00
MOQ:2
Mult:1
SPQ:1
Conn Socket Strip SKT 4 POS 2.54mm Press Fit ST Top Entry Thru-Hole Bulk
Available Stock
105
Estimated Ship Time:6-13 working days
1+$2.3805
50+$2.178
2,000+$1.2528
5,000+$1.1448
- +
Ext. Price(USD):$14.28
MOQ:6
Mult:1
SPQ:1
Connector Socket Strip, SKT, 22 Pos, 1.27mm Pitch, Solder, ST, TH, Tube
Available Stock
25
Estimated Ship Time:6-13 working days
1+$5.3935
60+$4.5144
1,000+$3.8448
2,000+$3.8016
- +
Ext. Price(USD):$16.18
MOQ:3
Mult:1
SPQ:1
PIN HEADER, 2.54MM PITCH, DUAL R
Available Stock
1,000
Estimated Ship Time:9-14 working days
1+$2.7
200+$2.516
400+$1.7971
800+$1.258
- +
Ext. Price(USD):$27.00
MOQ:10
Mult:1
SPQ:1
Samtec
ECAD Model:
Conn Unshrouded Header HDR 9 POS 2.54mm Solder ST Top Entry Thru-Hole Tube
Available Stock
116
Estimated Ship Time:6-13 working days
1+$1.886
50+$1.441
5,000+$0.689
10,000+$0.5994
- +
Ext. Price(USD):$15.08
MOQ:8
Mult:1
SPQ:1
Available Stock
470
Estimated Ship Time:5-12 working days
25+$1.15
250+$0.8932
7,500+$0.7404
10,000+$0.7319
- +
Ext. Price(USD):$31.05
MOQ:27
Mult:1
SPQ:1
Samtec
ECAD Model:
Conn Shrouded Header (4 Sides) HDR 9 POS 1mm Solder RA Side Entry SMD Micro Mate™ Bulk
Available Stock
760
Estimated Ship Time:6-13 working days
1+$1.7825
50+$1.595
1,900+$1.3608
4,750+$1.2312
- +
Ext. Price(USD):$14.26
MOQ:8
Mult:1
SPQ:1
Socket Strip, 26 Pos, 2.54mm, Press Fit, ST Top Entry, Thru-Hole, Tube
Available Stock
23
Estimated Ship Time:6-13 working days
1+$6.371
25+$5.67
48+$5.4108
112+$5.0976
- +
Ext. Price(USD):$19.11
MOQ:3
Mult:1
SPQ:1
Conn Extreme Power Terminal Strip M 10Power/32Signal POS 12mm/1.27mm Solder RA Side Entry Thru-Hole Bulk
Available Stock
9
Estimated Ship Time:6-13 working days
1+$25.231
10+$22.4424
112+$21.06
256+$20.5524
- +
Ext. Price(USD):$25.23
MOQ:1
Mult:1
SPQ:1
2POS 1.00MM(.039) SINGLE ROW RIG
Available Stock
7,525
Estimated Ship Time:9-14 working days
100+$0.1056
500+$0.0942
- +
Ext. Price(USD):$26.08
MOQ:247
Mult:1
SPQ:1
Conn Socket Strip SKT 8Power POS 5mm Solder ST Top Entry Thru-Hole Tray
Available Stock
4
Estimated Ship Time:6-13 working days
1+$6.9805
50+$5.562
500+$5.4648
1,000+$5.4324
- +
Ext. Price(USD):$20.94
MOQ:3
Mult:1
SPQ:1
Unshrouded Header HDR 14 POS 2.54mm Solder RA Side Entry TH Bulk
Available Stock
118
Estimated Ship Time:6-13 working days
1+$2.7025
50+$2.3112
2,000+$1.62
5,000+$1.4796
- +
Ext. Price(USD):$16.21
MOQ:6
Mult:1
SPQ:1
Header Connector
Available Stock
95
Estimated Ship Time:7-9 working days
14+
1+$1,254.935
10+$1,140.854
25+$965.338
50+$877.58
- +
Ext. Price(USD):$1,254.93
MOQ:1
Mult:1
SPQ:1
Conn Wire to Board RCP 70 POS 1.27mm Wire Wrap ST Thru-Hole
Available Stock
32
Estimated Ship Time:9-14 working days
1+$495.396
10+$485.4924
50+$475.7832
100+$466.2576
500+$456.9372
- +
Ext. Price(USD):$495.39
MOQ:1
Mult:1
SPQ:1
Samtec
Package:SMD,P=0.8mm
ECAD Model:
Samtec Edge Connector HSEC8-180-01-L-DV-A-K 2 Row 160 Pos 0.8mm Pitch SMD Receptacle
Available Stock
192
Estimated Ship Time:6-13 working days
1+$9.0735
10+$8.085
504+$5.3676
1,008+$5.0652
- +
Ext. Price(USD):$18.14
MOQ:2
Mult:1
SPQ:1
Connector Board Stacker HDR 14 POS 2mm Solder ST Top Entry SMD Tube
Available Stock
30
Estimated Ship Time:6-13 working days
1+$3.5995
40+$3.1644
1,000+$2.6892
2,000+$2.6136
- +
Ext. Price(USD):$14.39
MOQ:4
Mult:1
SPQ:1
Conn Unshrouded Header HDR 3 POS 2.54mm Solder ST Top Entry Thru-Hole Carton
Available Stock
16,200
Estimated Ship Time:5-12 working days
540+$0.2419
1,080+$0.2344
50,220+$0.1775
100,440+$0.1528
- +
Ext. Price(USD):$130.62
MOQ:540
Mult:1
SPQ:540
25 / PageGoto