Other Card Edge Components

Results:

Other card edge components include specialized or supplementary connector products that are not grouped with standard edgeboard connectors, housings, contacts, adapters or accessories. Because products in this category can use different interface and mounting formats, begin with the manufacturer part number and datasheet, identify the actual connector type, and then compare its mating and PCB requirements.

Pass the Part Identity Checkpoint

The category name alone does not define a single connector format. Use the following identification sequence before comparing products or approving a substitute.

1
Capture the Manufacturer Part Number Record the complete part number, manufacturer and product series without removing suffixes.
2
Identify the Actual Connector Type Determine whether the part is a header, socket, card-edge connector or another specialized component.
3
Confirm the Mating Interface Establish whether the product connects to a PCB card edge, another PCB, a cable assembly or a separate connector.
4
Decode the Physical Format Compare positions, rows, pitch, orientation, mounting type and termination method.
5
Verify the Datasheet Confirm the mating drawing, recommended PCB layout, ratings, materials and compatible product series.

Use the Part Number as the Primary Identifier

Product descriptions can be shortened or normalized across distributor databases. The complete manufacturer part number provides the most reliable route to the original drawing and product specification.

Manufacturer + Base Part Number + Prefix and Suffix + Series

Prefixes and suffixes may identify contact finish, packaging, mounting variation, keying or another configuration detail. Compare the complete ordering code when evaluating replacements.

Determine What the Part Connects

Establish the connection path before interpreting positions, pitch or mounting details. Products in this category may serve different interconnection functions.

PCB ↔ PCB
Board connection Confirm the interface on both boards, installed spacing and mating orientation.
PCB ↔ Cable
Wire connection Identify the mating housing, contact system, wire range and termination method.
Card ↔ Host
Card-edge interface Check card thickness, conductive-finger arrangement, insertion geometry and keying.

Decode the Connector Format

Once the product type and mating interface are known, translate the mechanical specification into a comparable set of fields.

Connector type Header, socket, receptacle, card-edge connector or another specified component.
Positions and rows Confirm the total number of electrical positions and how they are distributed across rows.
Pitch Match the center-to-center spacing of contacts or terminals to the mating product and PCB.
Orientation Check straight, vertical, right-angle, top-entry or side-entry configuration as applicable.
Mounting and termination Verify surface mount or through-hole installation and the specified solder or contact termination.

Match the PCB Installation

The connector body may fit the available space while its terminals or recommended footprint remain incompatible with the board. Check the complete installation drawing.

PCB footprint Compare pad or hole locations, terminal pattern, tolerances and keep-out areas.
Installed envelope Check connector height, body width, card approach and surrounding component clearance.
Assembly process Confirm soldering method, mounting hardware, packaging and automated assembly requirements.

Confirm the Mating Component

A compatible pitch and position count do not establish a complete mating match. Use the manufacturer’s drawing or related-products list to verify the opposing connector, housing, contact or PCB interface.

✓ Mating manufacturer part number ✓ Compatible product series ✓ Contact gender and arrangement ✓ Keying and polarization ✓ Engagement and insertion depth ✓ Electrical and temperature ratings

Build a Verifiable Part Identity

Save the identifying and mating information together so that purchasing, engineering and incoming inspection use the same product definition.

Part identity record
Manufacturer + Part number | Connector type | Mating product | Positions × pitch | Mounting

If the required product is already identifiable as a complete edgeboard connector, housing, contact, adapter or accessory, browse Card Edge Connectors & Components to select the corresponding product group.

Read More
Other Card Edge ComponentsResults:
Comprehensive
Price Priority
Stock Priority
Image
Part Number
Description
Availability
Unit Price(USD)
Quantity
Operation
Molex
ECAD Model:
Wire-to-Board Connector RCP 4-Pin 1.5mm Solder Straight SMD T/R
Available Stock
38,700
Estimated Ship Time:7-10 working days
22+
900+$0.572
1,800+$0.561
5,400+$0.506
12,600+$0.44
30,600+$0.429
- +
Ext. Price(USD):$514.80
MOQ:900
Mult:900
SPQ:900
Conn Unshrouded Header HDR 78 POS 2.54mm Solder ST Top Entry Thru-Hole FLEX STACK
Available Stock
132
Estimated Ship Time:7-9 working days
25+
1+$12.21
10+$11.561
1,000+$6.589
2,000+$5.269
- +
Ext. Price(USD):$36.63
MOQ:3
Mult:1
SPQ:1
Conn Board Stacker HDR 32 POS 2mm Solder ST Top Entry SMD
Available Stock
27
Estimated Ship Time:6-13 working days
1+$7.59
10+$7.04
1,008+$4.5792
2,016+$4.1256
- +
Ext. Price(USD):$15.18
MOQ:2
Mult:1
SPQ:1
Shrouded Header HDR 5mm Right Angle, 5C, 1x2P, UL
Available Stock
569
Estimated Ship Time:5-12 working days
100+$0.3759
500+$0.3016
25,000+$0.2394
50,000+$0.2387
- +
Ext. Price(USD):$37.59
MOQ:100
Mult:1
SPQ:1
Header Plug, Pin Header, 2.54mm Pitch, Vertical, 2x7Pin, Gold Flash, NY6T, 6.1mm × 2.5mm × 3.0mm
Available Stock
1,544
Estimated Ship Time:6-13 working days
10+$0.2427
100+$0.207
6,000+$0.1458
12,000+$0.1372
- +
Ext. Price(USD):$14.07
MOQ:58
Mult:1
SPQ:1
Conn Board Stacker HDR 56 POS 2mm Solder ST Top Entry SMD Tube
Available Stock
17
Estimated Ship Time:7-9 working days
21+
10+$6.6
- +
Ext. Price(USD):$66.00
MOQ:10
Mult:10
SPQ:10
Available Stock
1,206
Estimated Ship Time:6-13 working days
1+$2.4265
10+$2.116
1,300+$1.3608
1,950+$1.2852
- +
Ext. Price(USD):$14.55
MOQ:6
Mult:1
SPQ:1
Conn Open Pin Field Array SKT 240 POS 0.8mm Solder ST Top Entry SMD SEARAY™ T/R
Available Stock
274
Estimated Ship Time:6-13 working days
1+$30.448
100+$22.1184
250+$22.0752
425+$22.0644
- +
Ext. Price(USD):$30.44
MOQ:1
Mult:1
SPQ:1
Conn Unshrouded Header HDR 20 POS 2.54mm Solder ST Top Entry Thru-Hole Carton
Available Stock
296
Estimated Ship Time:7-9 working days
21+
65+$1.749
200+$1.716
- +
Ext. Price(USD):$113.68
MOQ:65
Mult:1
SPQ:1
Pancon
ECAD Model:
Available Stock
750
Estimated Ship Time:5-12 working days
25+$1.2857
50+$1.2488
750+$0.8314
1,000+$0.8143
- +
Ext. Price(USD):$32.14
MOQ:25
Mult:1
SPQ:100
Wire-to-Board Header, 24 Pos, 4.2mm Pitch, Solder, ST Top Entry, Thru-Hole, T/R
Available Stock
800
Estimated Ship Time:5-12 working days
300+$1.331
600+$1.2412
10,200+$1.0914
15,000+$1.0807
- +
Ext. Price(USD):$399.30
MOQ:300
Mult:300
SPQ:300
WAGO
ECAD Model:
Pre-order
1,000
Factory Lead Time:4-5 weeks
10+$9.976
50+$9.8097
100+$9.5603
1,000+$9.3941
- +
Ext. Price(USD):$99.76
MOQ:10
Mult:10
SPQ:10
Amphenol
ECAD Model:
Assy Lynx Qd Vertical Receptacle 40Pos Regular With Guide Pin Cond Lossy No Pin
Available Stock
184
Estimated Ship Time:9-14 working days
1+$8.1864
10+$6.9552
100+$5.9116
250+$5.6017
- +
Ext. Price(USD):$32.74
MOQ:4
Mult:1
SPQ:1
Conn Unshrouded Header HDR 20 POS 1.27mm Solder ST Top Entry Thru-Hole
Available Stock
65
Estimated Ship Time:6-13 working days
1+$5.3245
45+$4.1148
1,035+$3.2076
2,025+$3.0564
- +
Ext. Price(USD):$15.97
MOQ:3
Mult:1
SPQ:1
WAGO
ECAD Model:
Male Connector, Straight, 16-Pin, 3.5mm Pitch, Closed End, Vertical Mount, Reflow, Angled Contact Pin 1x1.2mm
Pre-order
5,000
Factory Lead Time:4-5 weeks
50+$2.379
250+$2.3394
500+$2.2799
5,000+$2.2402
- +
Ext. Price(USD):$118.95
MOQ:50
Mult:50
SPQ:50
Available Stock
509
Estimated Ship Time:5-12 working days
25+$1.5261
250+$1.1858
7,500+$0.9716
10,000+$0.9694
- +
Ext. Price(USD):$38.15
MOQ:25
Mult:1
SPQ:1
Conn Shrouded Header HDR 10 POS 2mm Solder ST Thru-Hole
Available Stock
92
Estimated Ship Time:5-12 working days
41+$2.783
100+$2.453
5,000+$1.2519
7,500+$1.2198
- +
Ext. Price(USD):$114.10
MOQ:41
Mult:41
SPQ:1
multicomp
ECAD Model:
WTB CONN, HEADER, R/A, 13POS, 1ROW, 2MM;
Available Stock
2,218
Estimated Ship Time:6-12 working days
100+$0.1513
200+$0.1385
- +
Ext. Price(USD):$25.11
MOQ:166
Mult:1
Molex
ECAD Model:
Wire-to-Board Header, 12 Pos, 6.35mm Pitch, Solder, ST Thru-Hole, Tray
Available Stock
1,510
Estimated Ship Time:7-9 working days
23+
65+$1.793
200+$1.76
350+$1.738
650+$1.705
- +
Ext. Price(USD):$116.54
MOQ:65
Mult:1
SPQ:1
Lumberg
ECAD Model:
Conn Tab Header HDR 10 POS 1.27mm Solder ST Top Entry Thru-Hole Micromodul™ Bulk
Available Stock
7,448
Estimated Ship Time:9-14 working days
1+$0.585
10+$0.4979
1,000+$0.299
3,000+$0.2767
- +
Ext. Price(USD):$26.24
MOQ:71
Mult:1
SPQ:1
Open Pin Field Array HDR 160 POS 0.8mm Solder ST Top Entry SMD SEARAY T/R
Available Stock
143
Estimated Ship Time:6-13 working days
1+$29.139
10+$28.5768
100+$28.4904
250+$22.7448
- +
Ext. Price(USD):$29.13
MOQ:1
Mult:1
SPQ:1
Elevated Shrouded Header HDR 34 POS 1.27mm Solder ST Thru-Hole Bulk
Available Stock
490
Estimated Ship Time:7-9 working days
16+
1+$15.367
10+$14.201
1,000+$5.456
2,000+$2.97
- +
Ext. Price(USD):$30.73
MOQ:2
Mult:1
SPQ:1
Conn Board Stacker HDR 20 POS 2mm Solder ST Top Entry SMD Tube
Available Stock
20
Estimated Ship Time:6-13 working days
1+$3.8295
28+$3.366
1,008+$2.2896
2,520+$1.9008
- +
Ext. Price(USD):$15.31
MOQ:4
Mult:1
SPQ:1
Available Stock
7
Estimated Ship Time:6-13 working days
1+$17.1465
10+$15.2388
253+$11.9124
506+$10.8432
- +
Ext. Price(USD):$17.14
MOQ:1
Mult:1
SPQ:1
Conn Board Stacker HDR 60 POS 2mm Solder ST Top Entry SMD Tube
Available Stock
23
Estimated Ship Time:6-13 working days
1+$10.0855
9+$9.339
504+$6.1128
1,008+$5.1084
- +
Ext. Price(USD):$20.17
MOQ:2
Mult:1
SPQ:1
25 / PageGoto