Other Card Edge Components

Results:

Other card edge components include specialized or supplementary connector products that are not grouped with standard edgeboard connectors, housings, contacts, adapters or accessories. Because products in this category can use different interface and mounting formats, begin with the manufacturer part number and datasheet, identify the actual connector type, and then compare its mating and PCB requirements.

Pass the Part Identity Checkpoint

The category name alone does not define a single connector format. Use the following identification sequence before comparing products or approving a substitute.

1
Capture the Manufacturer Part Number Record the complete part number, manufacturer and product series without removing suffixes.
2
Identify the Actual Connector Type Determine whether the part is a header, socket, card-edge connector or another specialized component.
3
Confirm the Mating Interface Establish whether the product connects to a PCB card edge, another PCB, a cable assembly or a separate connector.
4
Decode the Physical Format Compare positions, rows, pitch, orientation, mounting type and termination method.
5
Verify the Datasheet Confirm the mating drawing, recommended PCB layout, ratings, materials and compatible product series.

Use the Part Number as the Primary Identifier

Product descriptions can be shortened or normalized across distributor databases. The complete manufacturer part number provides the most reliable route to the original drawing and product specification.

Manufacturer + Base Part Number + Prefix and Suffix + Series

Prefixes and suffixes may identify contact finish, packaging, mounting variation, keying or another configuration detail. Compare the complete ordering code when evaluating replacements.

Determine What the Part Connects

Establish the connection path before interpreting positions, pitch or mounting details. Products in this category may serve different interconnection functions.

PCB ↔ PCB
Board connection Confirm the interface on both boards, installed spacing and mating orientation.
PCB ↔ Cable
Wire connection Identify the mating housing, contact system, wire range and termination method.
Card ↔ Host
Card-edge interface Check card thickness, conductive-finger arrangement, insertion geometry and keying.

Decode the Connector Format

Once the product type and mating interface are known, translate the mechanical specification into a comparable set of fields.

Connector type Header, socket, receptacle, card-edge connector or another specified component.
Positions and rows Confirm the total number of electrical positions and how they are distributed across rows.
Pitch Match the center-to-center spacing of contacts or terminals to the mating product and PCB.
Orientation Check straight, vertical, right-angle, top-entry or side-entry configuration as applicable.
Mounting and termination Verify surface mount or through-hole installation and the specified solder or contact termination.

Match the PCB Installation

The connector body may fit the available space while its terminals or recommended footprint remain incompatible with the board. Check the complete installation drawing.

PCB footprint Compare pad or hole locations, terminal pattern, tolerances and keep-out areas.
Installed envelope Check connector height, body width, card approach and surrounding component clearance.
Assembly process Confirm soldering method, mounting hardware, packaging and automated assembly requirements.

Confirm the Mating Component

A compatible pitch and position count do not establish a complete mating match. Use the manufacturer’s drawing or related-products list to verify the opposing connector, housing, contact or PCB interface.

✓ Mating manufacturer part number ✓ Compatible product series ✓ Contact gender and arrangement ✓ Keying and polarization ✓ Engagement and insertion depth ✓ Electrical and temperature ratings

Build a Verifiable Part Identity

Save the identifying and mating information together so that purchasing, engineering and incoming inspection use the same product definition.

Part identity record
Manufacturer + Part number | Connector type | Mating product | Positions × pitch | Mounting

If the required product is already identifiable as a complete edgeboard connector, housing, contact, adapter or accessory, browse Card Edge Connectors & Components to select the corresponding product group.

Read More
Other Card Edge ComponentsResults:
Comprehensive
Price Priority
Stock Priority
Image
Part Number
Description
Availability
Unit Price(USD)
Quantity
Operation
Conn Board Stacker HDR 44 POS 2mm Solder ST Top Entry SMD Tube
Available Stock
79
Estimated Ship Time:7-9 working days
19+
13+$11
26+$10.285
52+$9.471
- +
Ext. Price(USD):$143.00
MOQ:13
Mult:13
SPQ:13
Conn Shrouded Header HDR 34 POS 2.54mm Solder ST Thru-Hole Bulk
Available Stock
500
Estimated Ship Time:5-12 working days
100+$0.4976
500+$0.3868
10,000+$0.3282
15,000+$0.321
- +
Ext. Price(USD):$49.76
MOQ:100
Mult:1
SPQ:1
Molex
Package:SMD,P=1.5mm,Horizontal SMD
ECAD Model:
Conn Shrouded Header HDR 4 POS 1.5mm Solder RA Side Entry SMD CLIK-Mate T/R
Available Stock
2,487
Estimated Ship Time:9-14 working days
10+$1.1491
100+$0.9764
500+$0.8716
- +
Ext. Price(USD):$26.42
MOQ:23
Mult:1
SPQ:1
Molex
ECAD Model:
MINIFIT JR RA DR /PEGS TIN V2 6C
Available Stock
51
Estimated Ship Time:9-14 working days
50+$10.8
100+$10.584
500+$10.3723
1,000+$10.1649
5,000+$9.9616
- +
Ext. Price(USD):$540.00
MOQ:50
Mult:50
SPQ:1
High Speed Socket & Terminal Strip HDR/SKT 80 Pos 0.8mm Solder RA Side Entry SMD T/R
Available Stock
375
Estimated Ship Time:9-14 working days
1+$13.4028
10+$11.3897
25+$10.6756
50+$10.166
100+$9.6808
- +
Ext. Price(USD):$26.80
MOQ:2
Mult:1
SPQ:1
Conn Board Stacker HDR 16 POS 2.54mm Solder ST Top Entry SMD
Available Stock
76
Estimated Ship Time:6-13 working days
1+$3.4155
112+$2.3112
504+$2.1492
1,008+$2.1168
2,016+$1.8252
- +
Ext. Price(USD):$17.07
MOQ:5
Mult:1
SPQ:1
Available Stock
104
Estimated Ship Time:5-12 working days
10+$2.76
50+$2.398
5,000+$2.0972
7,500+$2.0865
- +
Ext. Price(USD):$30.36
MOQ:11
Mult:1
SPQ:1
Unshrouded Header, HDR, 36 POS, 2.54mm, Solder, ST, Top Entry, TH, Bulk
Available Stock
33
Estimated Ship Time:6-13 working days
1+$3.634
50+$3.078
1,000+$2.3868
2,000+$2.16
- +
Ext. Price(USD):$14.53
MOQ:4
Mult:1
SPQ:1
Conn Wire to Board HDR 8 POS Solder ST Thru-Hole
Available Stock
28
Estimated Ship Time:6-13 working days
1+$9.3955
45+$8.6832
270+$8.3484
540+$8.2404
1,035+$8.1
- +
Ext. Price(USD):$18.79
MOQ:2
Mult:1
SPQ:1
Samtec
ECAD Model:
Conn Socket Strip SKT 16 POS 5.08mm Solder ST Thru-Hole Tube
Available Stock
20
Estimated Ship Time:6-13 working days
1+$6.256
28+$5.454
504+$4.32
1,001+$4.0176
- +
Ext. Price(USD):$18.76
MOQ:3
Mult:1
SPQ:1
Molex
ECAD Model:
Position Connector
Available Stock
480
Estimated Ship Time:3-4 weeks
22+
22+$13.365
91+$12.826
240+$12.309
- +
Ext. Price(USD):$1,002.37
MOQ:75
Mult:1
SPQ:1
Wire to Board HDR 2 POS 2.54mm Solder ST Top Entry TH MAS-CON
Available Stock
2,562
Estimated Ship Time:5-12 working days
500+$0.1266
2,500+$0.118
100,000+$0.0881
150,000+$0.0867
- +
Ext. Price(USD):$63.30
MOQ:500
Mult:500
SPQ:500
Board Stacker HDR Connector, 16 Pos, 0.8mm Pitch, Solder ST Top Entry, SMD
Available Stock
71
Estimated Ship Time:6-13 working days
1+$6.1295
25+$5.2056
546+$4.2012
1,001+$3.8232
- +
Ext. Price(USD):$18.38
MOQ:3
Mult:1
SPQ:1
Pancon
ECAD Model:
Conn IDC Connector F 7 POS 3.96mm IDT RA Cable Mount Bag
Available Stock
370
Estimated Ship Time:5-12 working days
100+$0.9294
300+$0.7416
10,000+$0.5325
15,000+$0.5256
- +
Ext. Price(USD):$92.94
MOQ:100
Mult:100
SPQ:100
Conn Board Stacker HDR 7 POS 2.54mm Solder ST Top Entry SMD T/R
Available Stock
800
Estimated Ship Time:7-10 working days
21+
100+$1.045
500+$0.803
5,000+$0.462
10,000+$0.374
- +
Ext. Price(USD):$104.50
MOQ:100
Mult:100
SPQ:100
Amphenol
Package:SMD,P=0.8mm
ECAD Model:
64 Position Connector Plug Outer Shroud Contacts Surface Mount Gold
Available Stock
800
Estimated Ship Time:7-9 working days
21+
400+$1.683
800+$1.661
- +
Ext. Price(USD):$673.20
MOQ:400
Mult:400
SPQ:400
Socket Strip SKT 20 POS 2.54mm Press Fit ST Top Entry TH Tube
Available Stock
15
Estimated Ship Time:6-13 working days
1+$5.5545
30+$5.2056
50+$4.7952
100+$4.59
500+$4.3956
- +
Ext. Price(USD):$16.66
MOQ:3
Mult:1
SPQ:1
Molex
ECAD Model:
Conn Unshrouded Header HDR 6 POS 2mm Solder ST Top Entry SMD Milli-Grid™ T/R
Available Stock
3,750
Estimated Ship Time:7-9 working days
19+
750+$1.1
1,500+$1.078
- +
Ext. Price(USD):$825.00
MOQ:750
Mult:750
SPQ:750
Conn Wire to Board HDR 8 POS 2.54mm Solder ST Top Entry Thru-Hole MAS-CON®
Available Stock
4,388
Estimated Ship Time:5-12 working days
100+$0.5239
500+$0.4613
10,000+$0.3251
15,000+$0.3167
- +
Ext. Price(USD):$52.39
MOQ:100
Mult:100
SPQ:100
Samtec
Package:SMD,P=0.8mm
ECAD Model:
Conn High Speed Socket Strip SKT 104 POS 0.8mm Solder ST SMD Q Rate® T/R
Available Stock
91
Estimated Ship Time:6-13 working days
1+$20.7575
10+$17.9712
275+$12.3552
550+$12.1284
- +
Ext. Price(USD):$20.75
MOQ:1
Mult:1
SPQ:1
Conn Board Stacker HDR 4 POS 1.27mm Solder ST Top Entry Thru-Hole Bulk
Available Stock
57
Estimated Ship Time:6-13 working days
1+$1.5295
50+$1.43
5,000+$0.6404
10,000+$0.5875
- +
Ext. Price(USD):$15.29
MOQ:10
Mult:1
SPQ:1
Available Stock
509
Estimated Ship Time:6-13 working days
1+$12.4775
10+$10.967
512+$7.614
1,008+$7.5708
- +
Ext. Price(USD):$24.95
MOQ:2
Mult:1
SPQ:1
Samtec
ECAD Model:
Unshrouded Header SKT 10 POS 2.54mm Solder ST Top Entry Thru-Hole Tube
Available Stock
22
Estimated Ship Time:6-13 working days
1+$3.2085
46+$2.43
2,001+$1.6308
5,014+$1.5768
- +
Ext. Price(USD):$16.04
MOQ:5
Mult:1
SPQ:1
Conn Shrouded Header (4 Sides) M 2 POS 2mm Solder ST SMD T/R
Available Stock
2,517
Estimated Ship Time:9-14 working days
10+$0.3211
100+$0.2729
- +
Ext. Price(USD):$26.00
MOQ:81
Mult:1
SPQ:1
Samtec
ECAD Model:
Socket Strip SKT 1 Pos Solder ST Top Entry Thru-Hole Tube
Available Stock
1,015
Estimated Ship Time:6-13 working days
1+$0.345
50+$0.291
1,135+$0.1717
2,043+$0.1555
5,221+$0.1264
- +
Ext. Price(USD):$14.14
MOQ:41
Mult:1
SPQ:1
25 / PageGoto