Other Card Edge Components

Results:

Other card edge components include specialized or supplementary connector products that are not grouped with standard edgeboard connectors, housings, contacts, adapters or accessories. Because products in this category can use different interface and mounting formats, begin with the manufacturer part number and datasheet, identify the actual connector type, and then compare its mating and PCB requirements.

Pass the Part Identity Checkpoint

The category name alone does not define a single connector format. Use the following identification sequence before comparing products or approving a substitute.

1
Capture the Manufacturer Part Number Record the complete part number, manufacturer and product series without removing suffixes.
2
Identify the Actual Connector Type Determine whether the part is a header, socket, card-edge connector or another specialized component.
3
Confirm the Mating Interface Establish whether the product connects to a PCB card edge, another PCB, a cable assembly or a separate connector.
4
Decode the Physical Format Compare positions, rows, pitch, orientation, mounting type and termination method.
5
Verify the Datasheet Confirm the mating drawing, recommended PCB layout, ratings, materials and compatible product series.

Use the Part Number as the Primary Identifier

Product descriptions can be shortened or normalized across distributor databases. The complete manufacturer part number provides the most reliable route to the original drawing and product specification.

Manufacturer + Base Part Number + Prefix and Suffix + Series

Prefixes and suffixes may identify contact finish, packaging, mounting variation, keying or another configuration detail. Compare the complete ordering code when evaluating replacements.

Determine What the Part Connects

Establish the connection path before interpreting positions, pitch or mounting details. Products in this category may serve different interconnection functions.

PCB ↔ PCB
Board connection Confirm the interface on both boards, installed spacing and mating orientation.
PCB ↔ Cable
Wire connection Identify the mating housing, contact system, wire range and termination method.
Card ↔ Host
Card-edge interface Check card thickness, conductive-finger arrangement, insertion geometry and keying.

Decode the Connector Format

Once the product type and mating interface are known, translate the mechanical specification into a comparable set of fields.

Connector type Header, socket, receptacle, card-edge connector or another specified component.
Positions and rows Confirm the total number of electrical positions and how they are distributed across rows.
Pitch Match the center-to-center spacing of contacts or terminals to the mating product and PCB.
Orientation Check straight, vertical, right-angle, top-entry or side-entry configuration as applicable.
Mounting and termination Verify surface mount or through-hole installation and the specified solder or contact termination.

Match the PCB Installation

The connector body may fit the available space while its terminals or recommended footprint remain incompatible with the board. Check the complete installation drawing.

PCB footprint Compare pad or hole locations, terminal pattern, tolerances and keep-out areas.
Installed envelope Check connector height, body width, card approach and surrounding component clearance.
Assembly process Confirm soldering method, mounting hardware, packaging and automated assembly requirements.

Confirm the Mating Component

A compatible pitch and position count do not establish a complete mating match. Use the manufacturer’s drawing or related-products list to verify the opposing connector, housing, contact or PCB interface.

✓ Mating manufacturer part number ✓ Compatible product series ✓ Contact gender and arrangement ✓ Keying and polarization ✓ Engagement and insertion depth ✓ Electrical and temperature ratings

Build a Verifiable Part Identity

Save the identifying and mating information together so that purchasing, engineering and incoming inspection use the same product definition.

Part identity record
Manufacturer + Part number | Connector type | Mating product | Positions × pitch | Mounting

If the required product is already identifiable as a complete edgeboard connector, housing, contact, adapter or accessory, browse Card Edge Connectors & Components to select the corresponding product group.

Read More
Other Card Edge ComponentsResults:
Comprehensive
Price Priority
Stock Priority
Image
Part Number
Description
Availability
Unit Price(USD)
Quantity
Operation
Connector, Board Stacker HDR, 2.54mm, Solder Straight, Through Hole
Available Stock
25
Estimated Ship Time:6-13 working days
1+$1.794
50+$1.408
5,000+$0.8154
10,000+$0.7571
- +
Ext. Price(USD):$14.35
MOQ:8
Mult:1
SPQ:1
Conn Socket Strip SKT 5 POS 2.54mm Press Fit ST Top Entry Thru-Hole Tube
Available Stock
53
Estimated Ship Time:6-13 working days
1+$2.461
41+$2.343
1,025+$1.4256
2,009+$1.3176
- +
Ext. Price(USD):$14.76
MOQ:6
Mult:1
SPQ:1
Surface Mount Insulation Displacement Connector
Available Stock
3,431
Estimated Ship Time:9-14 working days
1+$1.6628
10+$1.4075
250+$0.9387
500+$0.8938
- +
Ext. Price(USD):$150.21
MOQ:150
Mult:1
SPQ:1
Unshrouded Header, 5 Pos, 5.08mm Pitch, Solder, Right Angle Side Entry, Thru-Hole, Bulk
Available Stock
174
Estimated Ship Time:6-13 working days
1+$2.4955
50+$1.947
2,000+$1.242
5,000+$1.1124
- +
Ext. Price(USD):$14.97
MOQ:6
Mult:1
SPQ:1
CONN HEADER VERT 34POS 2.54MM
Available Stock
784
Estimated Ship Time:9-14 working days
1+$9.243
- +
Ext. Price(USD):$27.72
MOQ:3
Mult:1
SPQ:1
Molex
ECAD Model:
6 Contact Right Angle HDR Assembly Key-A
Available Stock
50
Estimated Ship Time:9-14 working days
50+$10.8
100+$10.584
500+$10.3723
1,000+$10.1649
5,000+$9.9616
- +
Ext. Price(USD):$540.00
MOQ:50
Mult:50
SPQ:1
Header, Vertical, Wire-to-Board, PCB Mount
Available Stock
40
Estimated Ship Time:7-9 working days
22+
3+$39.787
16+$39.787
1,000+$21.065
5,000+$18.722
- +
Ext. Price(USD):$119.36
MOQ:3
Mult:1
SPQ:1
Pancon
ECAD Model:
IDC Connector F 16 POS 2.54mm IDT RA Cable Mount
Available Stock
1,975
Estimated Ship Time:5-12 working days
25+$2.2422
250+$2.1967
2,250+$1.0358
3,000+$1.0154
- +
Ext. Price(USD):$56.05
MOQ:25
Mult:1
SPQ:100
Amphenol IDC Connector, T812 Series, Receptacle, 24 Pos, 2 Row, 2.54mm Pitch, Wire Mount
Available Stock
569
Estimated Ship Time:5-10 working days
1+$0.8158
10+$0.803
100+$0.7775
500+$0.701
1,000+$0.6756
- +
Ext. Price(USD):$6.52
MOQ:8
Mult:1
Molex
ECAD Model:
1.0 W/B Wafer Assy 9CktEmbsTpPkgOrn
Available Stock
9,900
Estimated Ship Time:7-9 working days
19+
269+$0.2167
3,000+$0.209
6,000+$0.1991
- +
Ext. Price(USD):$58.29
MOQ:269
Mult:1
SPQ:1
Conn Board Stacker HDR 20 POS 2mm Solder ST Top Entry Thru-Hole
Available Stock
100
Estimated Ship Time:7-9 working days
21+
1+$2.442
50+$2.068
100+$1.738
- +
Ext. Price(USD):$31.74
MOQ:13
Mult:1
SPQ:1
WAGO
ECAD Model:
Pre-order
10,000
Factory Lead Time:4-5 weeks
100+$4.0305
500+$3.9633
1,000+$3.8626
10,000+$3.7954
- +
Ext. Price(USD):$403.05
MOQ:100
Mult:100
SPQ:100
Straight and Right Angle Cable a
Available Stock
75
Estimated Ship Time:9-14 working days
2+$142.0956
10+$139.2552
20+$136.4688
100+$133.7364
500+$131.058
- +
Ext. Price(USD):$284.19
MOQ:2
Mult:2
SPQ:1
Box Header, Double Row, Vertical, TH, 2.54mm Pitch
Available Stock
2,188
Estimated Ship Time:6-12 working days
50+$0.2885
100+$0.2654
200+$0.2551
- +
Ext. Price(USD):$25.09
MOQ:87
Mult:1
Pancon
ECAD Model:
Conn Wire to Board HDR 24 POS 2.54mm Solder ST Thru-Hole MAS-CON Bag
Available Stock
1,828
Estimated Ship Time:5-12 working days
100+$1.584
300+$1.551
7,500+$1.3375
10,000+$1.1556
- +
Ext. Price(USD):$158.40
MOQ:100
Mult:100
SPQ:100
Pancon
ECAD Model:
Conn Ejector Header HDR 20 POS 2.54mm Solder RA Thru-Hole Tray
Available Stock
1,080
Estimated Ship Time:5-12 working days
45+$2.3408
90+$2.266
5,040+$1.6478
7,515+$1.6371
- +
Ext. Price(USD):$105.33
MOQ:45
Mult:45
SPQ:45
Low Profile Terminal Strip HDR 80 POS 0.5mm Solder ST SMD Tube
Available Stock
34
Estimated Ship Time:6-13 working days
1+$6.555
48+$5.5944
504+$5.3244
1,008+$5.1624
- +
Ext. Price(USD):$19.66
MOQ:3
Mult:1
SPQ:1
Unshrouded Header, 22 Pos, 2.54mm Pitch, Solder Tail, ST Top Entry, Thru-Hole, Bulk
Available Stock
9
Estimated Ship Time:6-13 working days
1+$2.07
50+$1.793
2,000+$1.188
5,000+$1.0757
- +
Ext. Price(USD):$14.49
MOQ:7
Mult:1
SPQ:1
Conn Board Stacker HDR 10 POS 2mm Solder ST Top Entry Thru-Hole Bulk
Available Stock
96
Estimated Ship Time:6-13 working days
1+$2.3115
50+$2.167
2,000+$1.296
5,000+$1.1772
- +
Ext. Price(USD):$16.18
MOQ:7
Mult:1
SPQ:1
Pancon
ECAD Model:
Conn Unshrouded Header HDR 5 POS 3.96mm Solder ST Thru-Hole Bag
Available Stock
3,142
Estimated Ship Time:5-12 working days
500+$0.3163
1,000+$0.3155
15,000+$0.2364
25,000+$0.2127
- +
Ext. Price(USD):$158.15
MOQ:500
Mult:500
SPQ:500
Conn Shrouded Header HDR 6 POS 3.5mm Solder ST Top Entry Thru-Hole T/R
Available Stock
365
Estimated Ship Time:5-12 working days
50+$1.1402
250+$0.9339
8,000+$0.6195
15,000+$0.6174
- +
Ext. Price(USD):$57.01
MOQ:50
Mult:1
SPQ:1,000
Conn Board Stacker HDR 20 POS 2mm Solder ST Top Entry Thru-Hole
Available Stock
900
Estimated Ship Time:7-9 working days
19+
1+$3.839
50+$3.234
5,000+$1.177
10,000+$0.902
- +
Ext. Price(USD):$30.71
MOQ:8
Mult:1
SPQ:1
Lumberg Minimodul Wire-to-Board Connector, 2.5mm Pitch, 2-Pin, Right Angle, TH
Available Stock
290
Estimated Ship Time:5-10 working days
10+$0.4474
70+$0.441
130+$0.4308
- +
Ext. Price(USD):$8.94
MOQ:20
Mult:10
multicomp
ECAD Model:
WTB CONN, HEADER, R/A, 2POS, 1ROW, 2MM;
Available Stock
3,680
Estimated Ship Time:6-12 working days
200+$0.0271
- +
Ext. Price(USD):$25.01
MOQ:923
Mult:1
Unshrouded Header, 3 Pos, 1.27mm Pitch, Solder, ST Top Entry, TH
Available Stock
4,859
Estimated Ship Time:9-14 working days
100+$0.1502
500+$0.1341
1,000+$0.1277
5,000+$0.114
10,000+$0.1085
- +
Ext. Price(USD):$26.13
MOQ:174
Mult:1
SPQ:1
25 / PageGoto