Other Card Edge Components

Results:

Other card edge components include specialized or supplementary connector products that are not grouped with standard edgeboard connectors, housings, contacts, adapters or accessories. Because products in this category can use different interface and mounting formats, begin with the manufacturer part number and datasheet, identify the actual connector type, and then compare its mating and PCB requirements.

Pass the Part Identity Checkpoint

The category name alone does not define a single connector format. Use the following identification sequence before comparing products or approving a substitute.

1
Capture the Manufacturer Part Number Record the complete part number, manufacturer and product series without removing suffixes.
2
Identify the Actual Connector Type Determine whether the part is a header, socket, card-edge connector or another specialized component.
3
Confirm the Mating Interface Establish whether the product connects to a PCB card edge, another PCB, a cable assembly or a separate connector.
4
Decode the Physical Format Compare positions, rows, pitch, orientation, mounting type and termination method.
5
Verify the Datasheet Confirm the mating drawing, recommended PCB layout, ratings, materials and compatible product series.

Use the Part Number as the Primary Identifier

Product descriptions can be shortened or normalized across distributor databases. The complete manufacturer part number provides the most reliable route to the original drawing and product specification.

Manufacturer + Base Part Number + Prefix and Suffix + Series

Prefixes and suffixes may identify contact finish, packaging, mounting variation, keying or another configuration detail. Compare the complete ordering code when evaluating replacements.

Determine What the Part Connects

Establish the connection path before interpreting positions, pitch or mounting details. Products in this category may serve different interconnection functions.

PCB ↔ PCB
Board connection Confirm the interface on both boards, installed spacing and mating orientation.
PCB ↔ Cable
Wire connection Identify the mating housing, contact system, wire range and termination method.
Card ↔ Host
Card-edge interface Check card thickness, conductive-finger arrangement, insertion geometry and keying.

Decode the Connector Format

Once the product type and mating interface are known, translate the mechanical specification into a comparable set of fields.

Connector type Header, socket, receptacle, card-edge connector or another specified component.
Positions and rows Confirm the total number of electrical positions and how they are distributed across rows.
Pitch Match the center-to-center spacing of contacts or terminals to the mating product and PCB.
Orientation Check straight, vertical, right-angle, top-entry or side-entry configuration as applicable.
Mounting and termination Verify surface mount or through-hole installation and the specified solder or contact termination.

Match the PCB Installation

The connector body may fit the available space while its terminals or recommended footprint remain incompatible with the board. Check the complete installation drawing.

PCB footprint Compare pad or hole locations, terminal pattern, tolerances and keep-out areas.
Installed envelope Check connector height, body width, card approach and surrounding component clearance.
Assembly process Confirm soldering method, mounting hardware, packaging and automated assembly requirements.

Confirm the Mating Component

A compatible pitch and position count do not establish a complete mating match. Use the manufacturer’s drawing or related-products list to verify the opposing connector, housing, contact or PCB interface.

✓ Mating manufacturer part number ✓ Compatible product series ✓ Contact gender and arrangement ✓ Keying and polarization ✓ Engagement and insertion depth ✓ Electrical and temperature ratings

Build a Verifiable Part Identity

Save the identifying and mating information together so that purchasing, engineering and incoming inspection use the same product definition.

Part identity record
Manufacturer + Part number | Connector type | Mating product | Positions × pitch | Mounting

If the required product is already identifiable as a complete edgeboard connector, housing, contact, adapter or accessory, browse Card Edge Connectors & Components to select the corresponding product group.

Read More
Other Card Edge ComponentsResults:
Comprehensive
Price Priority
Stock Priority
Image
Part Number
Description
Availability
Unit Price(USD)
Quantity
Operation
Conn Unshrouded Header HDR 4 POS 1.27mm Solder ST SMD T/R
Available Stock
1,300
Estimated Ship Time:6-13 working days
1+$0.7705
250+$0.675
5,000+$0.4169
10,000+$0.3942
- +
Ext. Price(USD):$14.63
MOQ:19
Mult:1
SPQ:1
Molex
ECAD Model:
4CKT RAST 2.5 W/ PIP OEW RIB 3&4
Available Stock
70,550
Estimated Ship Time:7-9 working days
23+
800+$0.1595
25,600+$0.154
51,200+$0.1485
- +
Ext. Price(USD):$127.60
MOQ:800
Mult:800
SPQ:800
Molex
ECAD Model:
Connector Header 2 Power Position Right Angle Screw Mount Power BMI
Available Stock
575
Estimated Ship Time:7-9 working days
23+
11+$10.637
30+$10.461
55+$10.274
150+$10.087
504+$9.163
- +
Ext. Price(USD):$117.00
MOQ:11
Mult:1
SPQ:1
Conn Board Stacker HDR 4 POS 2mm Solder ST Top Entry Thru-Hole Bulk
Available Stock
10
Estimated Ship Time:6-13 working days
1+$1.5755
50+$1.375
5,000+$0.6512
10,000+$0.5681
- +
Ext. Price(USD):$14.17
MOQ:9
Mult:1
SPQ:1
multicomp
ECAD Model:
Shrouded Pin Header
Available Stock
2,437
Estimated Ship Time:6-12 working days
100+$0.1385
200+$0.1279
- +
Ext. Price(USD):$25.06
MOQ:181
Mult:1
Conn Shrouded Header HDR 40 POS 2.2mm Solder RA Thru-Hole Automotive Tube
Available Stock
3,966
Estimated Ship Time:5-12 working days
9+$6.1985
27+$5.302
1,008+$4.7722
2,502+$4.7187
- +
Ext. Price(USD):$55.78
MOQ:9
Mult:9
SPQ:9
Header Connector 9-Pin Potted RAST 2.5
Available Stock
10,825
Estimated Ship Time:7-9 working days
20+
300+$0.396
700+$0.385
1,200+$0.363
- +
Ext. Price(USD):$118.80
MOQ:300
Mult:1
SPQ:1
Molex
ECAD Model:
1.50mm Pitch CLIK Mate Wire-to-Board Receptacle, Dual Row, SMD, Vertical, 0.10μm Gold Plating, 14 Circuits, Black
Available Stock
121
Estimated Ship Time:9-14 working days
1+$3.996
10+$3.3977
100+$2.8879
- +
Ext. Price(USD):$27.97
MOQ:7
Mult:1
SPQ:1
Conn Board Stacker HDR 10 POS 0.8mm Solder ST SMD Tube
Available Stock
26
Estimated Ship Time:6-13 working days
1+$4.6575
50+$3.4236
1,022+$2.5812
2,044+$2.268
- +
Ext. Price(USD):$18.63
MOQ:4
Mult:1
SPQ:1
Samtec
ECAD Model:
Unshrouded Header, 14 Pos, 2.54mm Pitch, Solder, ST Top Entry, TH, Tube
Available Stock
28
Estimated Ship Time:6-13 working days
1+$5.1635
25+$4.4064
527+$3.5316
1,023+$3.2076
2,511+$2.7108
- +
Ext. Price(USD):$15.49
MOQ:3
Mult:1
SPQ:1
IDC Connector F, 50 POS, 2.54mm, IDT, RA, Cable Mount
Available Stock
3
Estimated Ship Time:5-12 working days
1+$31.464
25+$20.691
293+$19.6024
390+$18.4575
- +
Ext. Price(USD):$31.46
MOQ:1
Mult:1
SPQ:39
Conn Board Stacker HDR 56 POS 2mm Solder ST Top Entry SMD Tube
Available Stock
5
Estimated Ship Time:6-13 working days
1+$6.647
30+$6.0588
500+$5.13
1,000+$4.7304
- +
Ext. Price(USD):$19.94
MOQ:3
Mult:1
SPQ:1
Samtec
ECAD Model:
Unshrouded Header, HDR, 26 POS, 2.54mm, Solder, ST, Thru-Hole
Available Stock
38
Estimated Ship Time:6-13 working days
1+$4.6345
24+$4.422
1,000+$3.024
2,504+$3.0024
- +
Ext. Price(USD):$18.53
MOQ:4
Mult:1
SPQ:1
OUPIIN
ECAD Model:
PCB SOCKET, 20 PIN, STRAIGHT. 8.
Available Stock
231
Estimated Ship Time:9-14 working days
1+$0.7992
500+$0.6669
1,000+$0.5335
1,500+$0.4535
2,000+$0.4077
- +
Ext. Price(USD):$26.37
MOQ:33
Mult:1
SPQ:1
Molex
ECAD Model:
Wire-to-Board RCP 5 POS 1.5mm Solder ST SMD T/R
Available Stock
50
Estimated Ship Time:9-14 working days
50+$10.8
100+$10.584
500+$10.3723
1,000+$10.1649
5,000+$9.9616
- +
Ext. Price(USD):$540.00
MOQ:50
Mult:50
SPQ:1
Molex
ECAD Model:
4CKT RAST 2.5 7% GF GWT OEW
Available Stock
50
Estimated Ship Time:9-14 working days
50+$10.8
100+$10.584
500+$10.3723
1,000+$10.1649
5,000+$9.9616
- +
Ext. Price(USD):$540.00
MOQ:50
Mult:50
SPQ:1
Pin and Pinless Headers (AMP-LATCH)
Available Stock
38
Estimated Ship Time:7-9 working days
01+
20+$5.786
- +
Ext. Price(USD):$115.72
MOQ:20
Mult:1
SPQ:1
Conn Unshrouded Header HDR 24 POS 2.54mm Solder RA Side Entry Thru-Hole Bulk
Available Stock
35
Estimated Ship Time:6-13 working days
1+$5.106
25+$4.7844
1,000+$3.6828
2,500+$3.1968
- +
Ext. Price(USD):$15.31
MOQ:3
Mult:1
SPQ:1
IDC Connector F 20 POS 1.27mm IDT RA Side Entry Cable Mount
Available Stock
26
Estimated Ship Time:5-10 working days
1+$15.7288
10+$14.4796
25+$12.7717
- +
Ext. Price(USD):$31.45
MOQ:2
Mult:2
Available Stock
5
Estimated Ship Time:6-13 working days
1+$5.635
50+$4.7304
1,000+$3.5424
2,500+$3.0456
- +
Ext. Price(USD):$16.90
MOQ:3
Mult:1
SPQ:1
Available Stock
648
Estimated Ship Time:5-12 working days
25+$2.269
250+$2.1648
2,250+$1.0208
3,000+$1.0005
- +
Ext. Price(USD):$56.72
MOQ:25
Mult:1
SPQ:100
Available Stock
1,800
Estimated Ship Time:5-12 working days
100+$0.4806
500+$0.39
10,000+$0.3321
15,000+$0.3252
- +
Ext. Price(USD):$48.06
MOQ:100
Mult:100
SPQ:100
Socket Strip Receptacle, 4 Pos, 1.27mm Pitch, Solder, ST, Thru-Hole
Available Stock
4,459
Estimated Ship Time:7-9 working days
19+
50+$0.506
100+$0.407
5,000+$0.2035
10,000+$0.154
- +
Ext. Price(USD):$30.36
MOQ:60
Mult:1
SPQ:1
Truck, Bus and Off-Road Headers
Available Stock
31
Estimated Ship Time:6-13 working days
1+$57.244
10+$51.3864
25+$46.1268
50+$44.6148
100+$41.688
- +
Ext. Price(USD):$57.24
MOQ:1
Mult:1
SPQ:1
Harwin
ECAD Model:
Conn Datamate M 16 POS Crimp ST
Available Stock
84
Estimated Ship Time:9-14 working days
1+$21.6864
10+$18.4313
25+$17.277
50+$16.7301
- +
Ext. Price(USD):$43.37
MOQ:2
Mult:1
SPQ:1
25 / PageGoto