Other Card Edge Components

Results:

Other card edge components include specialized or supplementary connector products that are not grouped with standard edgeboard connectors, housings, contacts, adapters or accessories. Because products in this category can use different interface and mounting formats, begin with the manufacturer part number and datasheet, identify the actual connector type, and then compare its mating and PCB requirements.

Pass the Part Identity Checkpoint

The category name alone does not define a single connector format. Use the following identification sequence before comparing products or approving a substitute.

1
Capture the Manufacturer Part Number Record the complete part number, manufacturer and product series without removing suffixes.
2
Identify the Actual Connector Type Determine whether the part is a header, socket, card-edge connector or another specialized component.
3
Confirm the Mating Interface Establish whether the product connects to a PCB card edge, another PCB, a cable assembly or a separate connector.
4
Decode the Physical Format Compare positions, rows, pitch, orientation, mounting type and termination method.
5
Verify the Datasheet Confirm the mating drawing, recommended PCB layout, ratings, materials and compatible product series.

Use the Part Number as the Primary Identifier

Product descriptions can be shortened or normalized across distributor databases. The complete manufacturer part number provides the most reliable route to the original drawing and product specification.

Manufacturer + Base Part Number + Prefix and Suffix + Series

Prefixes and suffixes may identify contact finish, packaging, mounting variation, keying or another configuration detail. Compare the complete ordering code when evaluating replacements.

Determine What the Part Connects

Establish the connection path before interpreting positions, pitch or mounting details. Products in this category may serve different interconnection functions.

PCB ↔ PCB
Board connection Confirm the interface on both boards, installed spacing and mating orientation.
PCB ↔ Cable
Wire connection Identify the mating housing, contact system, wire range and termination method.
Card ↔ Host
Card-edge interface Check card thickness, conductive-finger arrangement, insertion geometry and keying.

Decode the Connector Format

Once the product type and mating interface are known, translate the mechanical specification into a comparable set of fields.

Connector type Header, socket, receptacle, card-edge connector or another specified component.
Positions and rows Confirm the total number of electrical positions and how they are distributed across rows.
Pitch Match the center-to-center spacing of contacts or terminals to the mating product and PCB.
Orientation Check straight, vertical, right-angle, top-entry or side-entry configuration as applicable.
Mounting and termination Verify surface mount or through-hole installation and the specified solder or contact termination.

Match the PCB Installation

The connector body may fit the available space while its terminals or recommended footprint remain incompatible with the board. Check the complete installation drawing.

PCB footprint Compare pad or hole locations, terminal pattern, tolerances and keep-out areas.
Installed envelope Check connector height, body width, card approach and surrounding component clearance.
Assembly process Confirm soldering method, mounting hardware, packaging and automated assembly requirements.

Confirm the Mating Component

A compatible pitch and position count do not establish a complete mating match. Use the manufacturer’s drawing or related-products list to verify the opposing connector, housing, contact or PCB interface.

✓ Mating manufacturer part number ✓ Compatible product series ✓ Contact gender and arrangement ✓ Keying and polarization ✓ Engagement and insertion depth ✓ Electrical and temperature ratings

Build a Verifiable Part Identity

Save the identifying and mating information together so that purchasing, engineering and incoming inspection use the same product definition.

Part identity record
Manufacturer + Part number | Connector type | Mating product | Positions × pitch | Mounting

If the required product is already identifiable as a complete edgeboard connector, housing, contact, adapter or accessory, browse Card Edge Connectors & Components to select the corresponding product group.

Read More
Other Card Edge ComponentsResults:
Comprehensive
Price Priority
Stock Priority
Image
Part Number
Description
Availability
Unit Price(USD)
Quantity
Operation
JST
ECAD Model:
Conn Shrouded Header HDR 7 POS 1mm Solder RA SMD T/R
Available Stock
5,052
Estimated Ship Time:9-14 working days
10+$0.7322
100+$0.6226
500+$0.5557
1,000+$0.5291
- +
Ext. Price(USD):$26.35
MOQ:36
Mult:1
SPQ:1
Conn Socket Strip SKT 30 POS 2.54mm Solder ST Top Entry SMD T/R
Available Stock
564
Estimated Ship Time:6-12 working days
1+$1.8949
50+$1.5192
100+$1.3154
200+$1.1987
- +
Ext. Price(USD):$26.52
MOQ:14
Mult:1
Terminal Strip M 4Power POS 1.88mm/3.12mm Solder RA Side Entry Thru-Hole PowerStrip™ Tray
Available Stock
42
Estimated Ship Time:6-13 working days
1+$4.416
25+$4.213
512+$3.8016
1,024+$3.7152
- +
Ext. Price(USD):$17.66
MOQ:4
Mult:1
SPQ:1
Unshrouded Header, HDR, 32 POS, 2.54mm Pitch, Solder, ST, Top Entry, Thru-Hole, Bag
Available Stock
149
Estimated Ship Time:7-9 working days
20+
1+$2.552
50+$2.222
5,000+$0.968
10,000+$0.792
- +
Ext. Price(USD):$30.62
MOQ:12
Mult:1
SPQ:1
Connector Unshrouded Header HDR 6 5.08mm Solder Straight Through Hole
Available Stock
109
Estimated Ship Time:6-13 working days
1+$2.369
50+$2.2032
2,000+$1.3068
5,000+$1.134
- +
Ext. Price(USD):$14.21
MOQ:6
Mult:1
SPQ:1
Elevated Shrouded Header HDR 12 POS 2mm Solder ST Thru-Hole
Available Stock
33
Estimated Ship Time:6-13 working days
1+$5.52
25+$4.9896
50+$4.6656
100+$4.428
500+$4.4172
- +
Ext. Price(USD):$16.56
MOQ:3
Mult:1
SPQ:1
Conn Unshrouded Header HDR 34 POS 2.54mm Solder ST Top Entry Thru-Hole Bulk
Available Stock
66
Estimated Ship Time:9-14 working days
1+$2.8836
50+$2.5056
100+$2.1805
500+$1.89
1,000+$1.7456
- +
Ext. Price(USD):$28.83
MOQ:10
Mult:1
SPQ:1
Molex
ECAD Model:
Molex 504189-2072 EMBS PACKAGE For 504189 2
Available Stock
32,900
Estimated Ship Time:7-9 working days
20+
91+$0.638
1,000+$0.616
2,000+$0.583
6,000+$0.561
16,000+$0.55
- +
Ext. Price(USD):$58.05
MOQ:91
Mult:1
SPQ:1
WAGO
ECAD Model:
Conn Shrouded Header HDR 9 POS 5mm Solder ST Thru-Hole Box
Available Stock
90
Estimated Ship Time:5-10 working days
1+$2.5365
- +
Ext. Price(USD):$7.60
MOQ:3
Mult:1
Molex
ECAD Model:
Edge-line Sliver Top Assy R/A 84Pos
Available Stock
29,650
Estimated Ship Time:7-9 working days
21+
15+$4.532
65+$4.455
10,000+$3.322
25,000+$3.025
- +
Ext. Price(USD):$67.98
MOQ:15
Mult:1
SPQ:1
Hirose 2.54mm Pitch 34-Pin Dual Row Header Wire-to-Board Connector, HIF3B Series, Straight, TH
Available Stock
88
Estimated Ship Time:5-10 working days
1+$7.5202
50+$7.2653
100+$6.9212
- +
Ext. Price(USD):$7.52
MOQ:1
Mult:1
RS PRO
ECAD Model:
RS PRO Header, 2.54mm Pitch, 36-Pin, Single Row, Right Angle, TH
Available Stock
180
Estimated Ship Time:5-10 working days
10+$2.6232
150+$2.5454
500+$2.4664
1,000+$2.4129
5,000+$1.9871
- +
Ext. Price(USD):$26.23
MOQ:10
Mult:10
ASSMANN WSW IC Socket Adapter, 28-Pin DIP to 28-Pin DIP, 2.54mm Pitch, TH
Available Stock
90
Estimated Ship Time:5-10 working days
5+$2.1796
125+$2.0929
500+$2.0063
- +
Ext. Price(USD):$10.89
MOQ:5
Mult:5
Molex
ECAD Model:
1.5WB DUAL ST EMBS TAPE PKG 14P Black
Available Stock
14,850
Estimated Ship Time:7-9 working days
18+
450+$1.485
900+$1.441
3,600+$1.419
8,100+$1.243
- +
Ext. Price(USD):$668.25
MOQ:450
Mult:450
SPQ:450
Wire to Board Connector SKT 32 POS 2.54mm Solder ST Thru-Hole
Available Stock
40
Estimated Ship Time:5-10 working days
20+$8.0231
500+$7.7822
1,500+$7.5419
4,000+$7.3813
8,000+$7.2207
- +
Ext. Price(USD):$160.46
MOQ:20
Mult:20
Available Stock
1,230
Estimated Ship Time:5-12 working days
68+$2.167
136+$2.156
5,032+$1.926
7,548+$1.9153
- +
Ext. Price(USD):$147.35
MOQ:68
Mult:68
SPQ:68
Samtec
ECAD Model:
Connector Header
Available Stock
732
Estimated Ship Time:5-12 working days
1+$6.8195
7+$4.8645
- +
Ext. Price(USD):$34.09
MOQ:5
Mult:1
SPQ:1
multicomp
ECAD Model:
Unshrouded Header, 14 Pos, 2.54mm Pitch, Solder, ST, Top Entry, TH
Available Stock
10,857
Estimated Ship Time:6-12 working days
200+$0.0745
- +
Ext. Price(USD):$25.03
MOQ:336
Mult:1
Pancon
ECAD Model:
Wire to Board Connector HDR 16-Pin 2.54mm Solder Straight Thru-Hole Bag
Available Stock
1,235
Estimated Ship Time:5-12 working days
25+$2.0505
250+$1.9569
2,250+$0.9223
3,000+$0.9042
- +
Ext. Price(USD):$51.26
MOQ:25
Mult:1
SPQ:100
Pancon
ECAD Model:
Available Stock
2,415
Estimated Ship Time:5-12 working days
25+$2.1885
250+$2.0878
2,250+$0.9844
3,000+$0.9651
- +
Ext. Price(USD):$54.71
MOQ:25
Mult:1
SPQ:100
WAGO
ECAD Model:
THT Male Header 1.0 x 1.0 mm Solder Pin Angled Threaded Flange Pin Spacing 5.08 mm 8-Pole
Available Stock
700
Estimated Ship Time:4-7 working days
100+$1.9901
500+$1.957
1,000+$1.9072
10,000+$1.874
- +
Ext. Price(USD):$199.01
MOQ:100
Mult:100
SPQ:100
Conn Board Stacker HDR 28 POS 2mm Solder ST Top Entry Thru-Hole
Available Stock
7
Estimated Ship Time:6-13 working days
1+$8.1535
10+$7.205
500+$5.4432
1,000+$4.7844
- +
Ext. Price(USD):$16.30
MOQ:2
Mult:1
SPQ:1
Automotive Connectors MQS PIN HEADER 32POS
Available Stock
3,328
Estimated Ship Time:7-9 working days
21+
18+$6.391
86+$6.127
344+$5.885
859+$5.643
2,575+$5.412
- +
Ext. Price(USD):$115.03
MOQ:18
Mult:1
SPQ:1
JST
Package:SMD,P=2mm
ECAD Model:
Shrouded Header (4 Sides), HDR 4 POS, 2mm, Solder RA Side Entry, SMD, T/R
Available Stock
4,296
Estimated Ship Time:6-13 working days
10+$0.8625
25+$0.7889
3,000+$0.4612
5,000+$0.4082
- +
Ext. Price(USD):$14.66
MOQ:17
Mult:1
SPQ:1
Amphenol ICC Minitek Series 2.0mm Pitch 25-Pin Single Row Header, TH
Available Stock
964
Estimated Ship Time:6-13 working days
1+$2.2885
10+$2.277
2,500+$1.6416
5,000+$1.6308
- +
Ext. Price(USD):$16.01
MOQ:7
Mult:1
SPQ:1
25 / PageGoto