Other Card Edge Components

Results:

Other card edge components include specialized or supplementary connector products that are not grouped with standard edgeboard connectors, housings, contacts, adapters or accessories. Because products in this category can use different interface and mounting formats, begin with the manufacturer part number and datasheet, identify the actual connector type, and then compare its mating and PCB requirements.

Pass the Part Identity Checkpoint

The category name alone does not define a single connector format. Use the following identification sequence before comparing products or approving a substitute.

1
Capture the Manufacturer Part Number Record the complete part number, manufacturer and product series without removing suffixes.
2
Identify the Actual Connector Type Determine whether the part is a header, socket, card-edge connector or another specialized component.
3
Confirm the Mating Interface Establish whether the product connects to a PCB card edge, another PCB, a cable assembly or a separate connector.
4
Decode the Physical Format Compare positions, rows, pitch, orientation, mounting type and termination method.
5
Verify the Datasheet Confirm the mating drawing, recommended PCB layout, ratings, materials and compatible product series.

Use the Part Number as the Primary Identifier

Product descriptions can be shortened or normalized across distributor databases. The complete manufacturer part number provides the most reliable route to the original drawing and product specification.

Manufacturer + Base Part Number + Prefix and Suffix + Series

Prefixes and suffixes may identify contact finish, packaging, mounting variation, keying or another configuration detail. Compare the complete ordering code when evaluating replacements.

Determine What the Part Connects

Establish the connection path before interpreting positions, pitch or mounting details. Products in this category may serve different interconnection functions.

PCB ↔ PCB
Board connection Confirm the interface on both boards, installed spacing and mating orientation.
PCB ↔ Cable
Wire connection Identify the mating housing, contact system, wire range and termination method.
Card ↔ Host
Card-edge interface Check card thickness, conductive-finger arrangement, insertion geometry and keying.

Decode the Connector Format

Once the product type and mating interface are known, translate the mechanical specification into a comparable set of fields.

Connector type Header, socket, receptacle, card-edge connector or another specified component.
Positions and rows Confirm the total number of electrical positions and how they are distributed across rows.
Pitch Match the center-to-center spacing of contacts or terminals to the mating product and PCB.
Orientation Check straight, vertical, right-angle, top-entry or side-entry configuration as applicable.
Mounting and termination Verify surface mount or through-hole installation and the specified solder or contact termination.

Match the PCB Installation

The connector body may fit the available space while its terminals or recommended footprint remain incompatible with the board. Check the complete installation drawing.

PCB footprint Compare pad or hole locations, terminal pattern, tolerances and keep-out areas.
Installed envelope Check connector height, body width, card approach and surrounding component clearance.
Assembly process Confirm soldering method, mounting hardware, packaging and automated assembly requirements.

Confirm the Mating Component

A compatible pitch and position count do not establish a complete mating match. Use the manufacturer’s drawing or related-products list to verify the opposing connector, housing, contact or PCB interface.

✓ Mating manufacturer part number ✓ Compatible product series ✓ Contact gender and arrangement ✓ Keying and polarization ✓ Engagement and insertion depth ✓ Electrical and temperature ratings

Build a Verifiable Part Identity

Save the identifying and mating information together so that purchasing, engineering and incoming inspection use the same product definition.

Part identity record
Manufacturer + Part number | Connector type | Mating product | Positions × pitch | Mounting

If the required product is already identifiable as a complete edgeboard connector, housing, contact, adapter or accessory, browse Card Edge Connectors & Components to select the corresponding product group.

Read More
Other Card Edge ComponentsResults:
Comprehensive
Price Priority
Stock Priority
Image
Part Number
Description
Availability
Unit Price(USD)
Quantity
Operation
Amphenol
ECAD Model:
Conn Socket Strip SKT 26 POS 2.54mm Solder ST Top Entry Thru-Hole
Available Stock
50
Estimated Ship Time:5-12 working days
1+$9.5795
50+$3.157
- +
Ext. Price(USD):$38.31
MOQ:4
Mult:1
PCB Mount Header Vertical 4 Position 2.5 mm [.098 in] Centerline Fully Shrouded Tin (Sn) Through Hole - Solder Signal AMP Signal Double Lock
Available Stock
12,160
Estimated Ship Time:7-9 working days
18+
1,900+$0.0583
10,000+$0.055
- +
Ext. Price(USD):$110.77
MOQ:1,900
Mult:1
SPQ:1
Shrouded Header (4 Sides), HDR, 18 POS, 4.68mm, Solder, ST Top Entry, Thru-Hole
Available Stock
45
Estimated Ship Time:6-13 working days
1+$18.906
10+$15.0984
25+$14.9796
50+$14.7312
100+$12.204
- +
Ext. Price(USD):$18.90
MOQ:1
Mult:1
SPQ:1
Available Stock
14
Estimated Ship Time:6-13 working days
1+$5.5545
25+$4.7196
1,025+$3.456
2,501+$3.1212
- +
Ext. Price(USD):$16.66
MOQ:3
Mult:1
SPQ:1
Header, Unshrouded, 36-Pos, 2.54mm Pitch, Right Angle Side Entry, Thru-Hole
Available Stock
35
Estimated Ship Time:6-13 working days
1+$3.8755
25+$3.564
1,000+$2.7216
2,500+$2.538
- +
Ext. Price(USD):$15.50
MOQ:4
Mult:1
SPQ:1
0.050" (1.27MM) PITCH, PLUG, 9,1
Available Stock
104
Estimated Ship Time:9-14 working days
1+$5.9292
13+$4.9456
1,001+$3.6399
2,509+$3.4116
- +
Ext. Price(USD):$29.64
MOQ:5
Mult:1
SPQ:1
Amphenol IDC Connector, TMM Series, Plug, 8-Ch, 2-R, 1.27mm Pitch, Wire Mount
Available Stock
1,895
Estimated Ship Time:5-10 working days
5+$1.2721
- +
Ext. Price(USD):$12.72
MOQ:10
Mult:5
Samtec
ECAD Model:
Conn IDC Connector M 40 POS 2.54mm IDT RA Cable Mount Tube
Available Stock
22
Estimated Ship Time:6-13 working days
1+$7.199
10+$6.424
500+$5.1408
1,000+$4.7844
- +
Ext. Price(USD):$14.39
MOQ:2
Mult:1
SPQ:1
Vertical Headers
Available Stock
470
Estimated Ship Time:5-12 working days
25+$0.8372
250+$0.7161
7,500+$0.611
10,000+$0.5799
- +
Ext. Price(USD):$30.13
MOQ:36
Mult:1
SPQ:500
Conn Shrouded Header F 6 POS 5.08mm Wire Wrap ST Wall Mount Carton
Available Stock
75
Estimated Ship Time:5-12 working days
10+$3.5535
50+$3.047
2,500+$2.7071
5,000+$2.6857
- +
Ext. Price(USD):$35.53
MOQ:10
Mult:1
SPQ:1
WAGO
ECAD Model:
Male Header for PCBs, Straight Solder Pin 0.8mm × 0.8mm, 9 x 2-Pole, Orientation Nose, 3.5mm/0.138in Pitch, Mismating Protected, 2 Rows, Vertical Mount
Pre-order
2,500
Factory Lead Time:4-5 weeks
25+$6.8298
125+$6.7159
250+$6.5452
2,500+$6.4314
- +
Ext. Price(USD):$170.74
MOQ:25
Mult:25
SPQ:25
Available Stock
193
Estimated Ship Time:6-13 working days
1+$1.61
50+$1.408
5,000+$0.6394
10,000+$0.5659
- +
Ext. Price(USD):$14.49
MOQ:9
Mult:1
SPQ:1
Adam Tech
ECAD Model:
Conn Unshrouded Header HDR 12 POS 2.54mm Solder RA Side Entry Thru-Hole Bag
Available Stock
2,600
Estimated Ship Time:5-12 working days
100+$0.3652
250+$0.3548
3,750+$0.236
5,000+$0.2313
- +
Ext. Price(USD):$36.52
MOQ:100
Mult:1
SPQ:500
Molex
ECAD Model:
Board to Board Connector RCP 35 POS 3mm Solder Straight Thru-Hole Tray
Available Stock
120
Estimated Ship Time:7-9 working days
08+
40+$1.584
- +
Ext. Price(USD):$63.36
MOQ:40
Mult:1
SPQ:1
Samtec
ECAD Model:
Conn Socket Strip SKT 9 POS 5.08mm Solder ST Thru-Hole Tube
Available Stock
35
Estimated Ship Time:6-13 working days
1+$5.037
60+$3.9528
1,008+$3.0996
2,004+$2.8296
- +
Ext. Price(USD):$15.11
MOQ:3
Mult:1
SPQ:1
Conn Wire to Board PL 24 POS 1.27mm Solder ST Top Entry Thru-Hole
Available Stock
139
Estimated Ship Time:9-14 working days
2+$134.028
10+$131.3496
20+$128.7252
100+$126.1548
500+$123.6276
- +
Ext. Price(USD):$268.05
MOQ:2
Mult:2
SPQ:1
Conn Box Connector PIN 80 POS 2.54mm Solder RA Thru-Hole
Available Stock
137
Estimated Ship Time:7-9 working days
21+
2+$92.829
3+$91.113
60+$85.954
100+$72.094
- +
Ext. Price(USD):$185.65
MOQ:2
Mult:1
SPQ:1
TERM BLOCK HDR 9POS 5MM
Available Stock
200
Estimated Ship Time:9-14 working days
10+$2.3933
25+$2.0892
1,000+$1.3905
5,000+$1.2685
- +
Ext. Price(USD):$26.32
MOQ:11
Mult:1
SPQ:1
Molex
ECAD Model:
Wire to Board Connector Receptacle, 15 Pos, 1.5mm, Solder RA, SMD, T/R
Available Stock
50
Estimated Ship Time:9-14 working days
50+$10.8
100+$10.584
500+$10.3723
1,000+$10.1649
5,000+$9.9616
- +
Ext. Price(USD):$540.00
MOQ:50
Mult:50
SPQ:1
Conn Board Stacker HDR 6 POS 2mm Solder ST Top Entry Thru-Hole Bulk
Available Stock
3,748
Estimated Ship Time:5-12 working days
1+$0.9856
250+$0.8635
7,500+$0.3804
10,000+$0.2995
- +
Ext. Price(USD):$30.55
MOQ:31
Mult:1
SPQ:1
Amphenol
Package:SMD,P=0.8mm
ECAD Model:
64 Position Connector Receptacle Center Strip Contacts Surface Mount Gold
Available Stock
500
Estimated Ship Time:7-9 working days
21+
250+$1.837
500+$1.804
- +
Ext. Price(USD):$459.25
MOQ:250
Mult:250
SPQ:250
Conn Wire-to-Board HDR 8 POS 5.08mm Solder RA Side Entry TH Box
Available Stock
462
Estimated Ship Time:6-13 working days
10+$0.8487
25+$0.7314
1,140+$0.4331
5,130+$0.4082
- +
Ext. Price(USD):$14.42
MOQ:17
Mult:1
SPQ:1
Conn Socket Strip SKT 14 POS 2mm Solder ST SMD Tube
Available Stock
31
Estimated Ship Time:6-13 working days
1+$7.4865
25+$6.4152
520+$5.1948
1,000+$4.4712
- +
Ext. Price(USD):$14.97
MOQ:2
Mult:1
SPQ:1
Conn Unshrouded Header HDR 26 POS 2.54mm Solder ST Top Entry Thru-Hole FLEX STACK
Available Stock
38
Estimated Ship Time:6-13 working days
1+$4.9565
50+$4.0392
1,000+$3.132
2,000+$3.024
- +
Ext. Price(USD):$14.86
MOQ:3
Mult:1
SPQ:1
Molex
ECAD Model:
Molex Mini-Fit Jr. 4.2mm Pitch 6P Dual Row Header, Vertical, TH
Available Stock
131
Estimated Ship Time:5-10 working days
5+$3.0642
125+$2.9954
250+$2.9316
- +
Ext. Price(USD):$15.32
MOQ:5
Mult:5
25 / PageGoto