Other Card Edge Components

Results:

Other card edge components include specialized or supplementary connector products that are not grouped with standard edgeboard connectors, housings, contacts, adapters or accessories. Because products in this category can use different interface and mounting formats, begin with the manufacturer part number and datasheet, identify the actual connector type, and then compare its mating and PCB requirements.

Pass the Part Identity Checkpoint

The category name alone does not define a single connector format. Use the following identification sequence before comparing products or approving a substitute.

1
Capture the Manufacturer Part Number Record the complete part number, manufacturer and product series without removing suffixes.
2
Identify the Actual Connector Type Determine whether the part is a header, socket, card-edge connector or another specialized component.
3
Confirm the Mating Interface Establish whether the product connects to a PCB card edge, another PCB, a cable assembly or a separate connector.
4
Decode the Physical Format Compare positions, rows, pitch, orientation, mounting type and termination method.
5
Verify the Datasheet Confirm the mating drawing, recommended PCB layout, ratings, materials and compatible product series.

Use the Part Number as the Primary Identifier

Product descriptions can be shortened or normalized across distributor databases. The complete manufacturer part number provides the most reliable route to the original drawing and product specification.

Manufacturer + Base Part Number + Prefix and Suffix + Series

Prefixes and suffixes may identify contact finish, packaging, mounting variation, keying or another configuration detail. Compare the complete ordering code when evaluating replacements.

Determine What the Part Connects

Establish the connection path before interpreting positions, pitch or mounting details. Products in this category may serve different interconnection functions.

PCB ↔ PCB
Board connection Confirm the interface on both boards, installed spacing and mating orientation.
PCB ↔ Cable
Wire connection Identify the mating housing, contact system, wire range and termination method.
Card ↔ Host
Card-edge interface Check card thickness, conductive-finger arrangement, insertion geometry and keying.

Decode the Connector Format

Once the product type and mating interface are known, translate the mechanical specification into a comparable set of fields.

Connector type Header, socket, receptacle, card-edge connector or another specified component.
Positions and rows Confirm the total number of electrical positions and how they are distributed across rows.
Pitch Match the center-to-center spacing of contacts or terminals to the mating product and PCB.
Orientation Check straight, vertical, right-angle, top-entry or side-entry configuration as applicable.
Mounting and termination Verify surface mount or through-hole installation and the specified solder or contact termination.

Match the PCB Installation

The connector body may fit the available space while its terminals or recommended footprint remain incompatible with the board. Check the complete installation drawing.

PCB footprint Compare pad or hole locations, terminal pattern, tolerances and keep-out areas.
Installed envelope Check connector height, body width, card approach and surrounding component clearance.
Assembly process Confirm soldering method, mounting hardware, packaging and automated assembly requirements.

Confirm the Mating Component

A compatible pitch and position count do not establish a complete mating match. Use the manufacturer’s drawing or related-products list to verify the opposing connector, housing, contact or PCB interface.

✓ Mating manufacturer part number ✓ Compatible product series ✓ Contact gender and arrangement ✓ Keying and polarization ✓ Engagement and insertion depth ✓ Electrical and temperature ratings

Build a Verifiable Part Identity

Save the identifying and mating information together so that purchasing, engineering and incoming inspection use the same product definition.

Part identity record
Manufacturer + Part number | Connector type | Mating product | Positions × pitch | Mounting

If the required product is already identifiable as a complete edgeboard connector, housing, contact, adapter or accessory, browse Card Edge Connectors & Components to select the corresponding product group.

Read More
Other Card Edge ComponentsResults:
Comprehensive
Price Priority
Stock Priority
Image
Part Number
Description
Availability
Unit Price(USD)
Quantity
Operation
Molex
ECAD Model:
Conn Wire to Board HDR 6 POS 5.08mm Solder ST Thru-Hole KK Bag
Available Stock
50
Estimated Ship Time:9-14 working days
50+$10.8
100+$10.584
500+$10.3723
1,000+$10.1649
5,000+$9.9616
- +
Ext. Price(USD):$540.00
MOQ:50
Mult:50
SPQ:1
Harwin
ECAD Model:
Datamate J-Tek DIL Male Small Bore Crimp Connector, Gold, Jackscrews, Vertical 5mm Board Mount, 4/4 Contacts
Available Stock
36
Estimated Ship Time:5-10 working days
1+$16.5828
10+$15.2572
- +
Ext. Price(USD):$16.58
MOQ:1
Mult:1
Available Stock
5
Estimated Ship Time:6-13 working days
1+$3.4845
50+$2.808
2,000+$1.6956
5,000+$1.5012
- +
Ext. Price(USD):$17.42
MOQ:5
Mult:1
SPQ:1
Pancon
ECAD Model:
IDC Connector, F, 12 Pos, 3.96mm, IDT, RA, Cable Mount
Available Stock
648
Estimated Ship Time:5-12 working days
25+$2.269
250+$2.1648
2,250+$1.0208
3,000+$1.0005
- +
Ext. Price(USD):$56.72
MOQ:25
Mult:1
SPQ:100
Conn Socket Strip SKT 8 POS 2.54mm Solder ST Thru-Hole Box/Tube
Available Stock
1,044
Estimated Ship Time:6-13 working days
1+$3.7605
10+$3.267
280+$2.4624
504+$2.4084
- +
Ext. Price(USD):$15.04
MOQ:4
Mult:1
SPQ:1
Conn Socket Strip SKT 12 POS 1.27mm Solder ST Thru-Hole Bulk
Available Stock
58
Estimated Ship Time:6-13 working days
1+$3.473
50+$2.97
1,000+$2.3328
2,000+$2.2896
- +
Ext. Price(USD):$17.36
MOQ:5
Mult:1
SPQ:1
Molex
ECAD Model:
Wire-to-Board HDR 4 Pos 2mm Solder RA Side Entry SMD T/R
Available Stock
4,200
Estimated Ship Time:7-9 working days
19+
700+$0.3091
1,400+$0.3036
2,100+$0.297
4,200+$0.286
- +
Ext. Price(USD):$216.37
MOQ:700
Mult:700
SPQ:700
Conn Shrouded Header HDR 30 POS 1.25mm Solder ST Top Entry SMD
Available Stock
1,363
Estimated Ship Time:6-13 working days
1+$2.323
10+$1.8975
2,508+$1.2096
5,016+$1.1664
- +
Ext. Price(USD):$16.26
MOQ:7
Mult:1
SPQ:1
Conn Unshrouded Header HDR 7 POS 2mm Solder ST Top Entry Thru-Hole
Available Stock
285
Estimated Ship Time:6-13 working days
1+$0.9085
50+$0.7491
5,000+$0.4115
10,000+$0.2948
- +
Ext. Price(USD):$14.53
MOQ:16
Mult:1
SPQ:1
Conn Board to Board HDR 34 POS 2mm Solder RA Thru-Hole Box/Tray
Available Stock
14,400
Estimated Ship Time:7-10 working days
21+
25+$5.918
1,200+$5.643
5,000+$4.301
10,000+$3.762
- +
Ext. Price(USD):$147.95
MOQ:25
Mult:1
SPQ:1
Conn Socket Strip SKT 12 POS 2.54mm Solder ST Thru-Hole Tray
Available Stock
1,621
Estimated Ship Time:9-14 working days
1+$0.378
1,000+$0.357
5,000+$0.3007
10,000+$0.2255
- +
Ext. Price(USD):$26.08
MOQ:69
Mult:1
SPQ:1
Terminal Strip Socket/Header 10 POS 2.54mm Solder Straight Thru-Hole Bulk
Available Stock
15
Estimated Ship Time:6-13 working days
1+$3.933
50+$3.0888
1,000+$2.0952
2,000+$1.9872
- +
Ext. Price(USD):$15.73
MOQ:4
Mult:1
SPQ:1
Wire-to-Board Connector Receptacle 20 Pos 3mm Solder Straight Thru-Hole Loose
Available Stock
2,085
Estimated Ship Time:7-9 working days
22+
45+$2.629
150+$2.585
250+$2.541
450+$2.497
1,200+$2.266
- +
Ext. Price(USD):$118.30
MOQ:45
Mult:1
SPQ:1
Pancon
ECAD Model:
IDC Connector, F, 10 POS, 2.54mm IDT, RA, Cable Mount, Bag
Available Stock
2,564
Estimated Ship Time:5-12 working days
50+$1.3608
250+$1.3332
2,250+$0.6292
3,000+$0.6163
- +
Ext. Price(USD):$68.04
MOQ:50
Mult:1
SPQ:100
CONN SPRING PISTON 4POS PCB
Available Stock
369
Estimated Ship Time:9-14 working days
1+$7.8084
10+$6.6344
100+$5.6392
300+$5.4719
- +
Ext. Price(USD):$31.23
MOQ:4
Mult:1
SPQ:1
Molex
ECAD Model:
Available Stock
6,222
Estimated Ship Time:6-13 working days
10+$0.6406
25+$0.6003
1,050+$0.4439
2,520+$0.4212
- +
Ext. Price(USD):$14.09
MOQ:22
Mult:1
SPQ:1
Molex
ECAD Model:
Board to Board Connector, 20 Pos, 0.4mm Pitch, Solder, Straight, SMD, T/R
Available Stock
7,500
Estimated Ship Time:5-12 working days
2,500+$1.1235
- +
Ext. Price(USD):$2,808.75
MOQ:2,500
Mult:2,500
SPQ:2,500
Harwin
ECAD Model:
Conn Datamate SKT 80 POS 2mm Crimp ST Cable Mount Bulk/Loose
Available Stock
1,000
Estimated Ship Time:9-14 working days
10+$2.0261
25+$1.8995
500+$1.5372
1,000+$1.4952
- +
Ext. Price(USD):$26.33
MOQ:13
Mult:1
SPQ:1
Samtec TSW Series, 2.54mm Pitch, 50-Pin Single Row Header
Available Stock
235
Estimated Ship Time:6-13 working days
1+$6.2215
25+$4.9572
500+$4.8816
1,000+$4.7196
- +
Ext. Price(USD):$18.66
MOQ:3
Mult:1
SPQ:1
RIGHT ANGLE HEADER W/GUIDES ASSEMBLY MULTI-BEAM XL
Available Stock
106
Estimated Ship Time:7-9 working days
18+
20+$5.841
50+$5.599
- +
Ext. Price(USD):$116.82
MOQ:20
Mult:1
SPQ:1
Molex
ECAD Model:
Shrouded Header (4 Sides) HDR 6 Pos 2.54mm Solder RA Thru-Hole H-DAC 64 Automotive Tube
Available Stock
50
Estimated Ship Time:9-14 working days
50+$10.8
100+$10.584
500+$10.3723
1,000+$10.1649
5,000+$9.9616
- +
Ext. Price(USD):$540.00
MOQ:50
Mult:50
SPQ:1
1.80mm WTB Connector, USCAR-2 V2, Right Angle TH, 20-Pin Header A Coding
Available Stock
2,651
Estimated Ship Time:6-13 working days
1+$2.9325
10+$2.553
250+$2.2464
500+$2.1816
800+$1.998
- +
Ext. Price(USD):$14.66
MOQ:5
Mult:1
SPQ:1
Molex
ECAD Model:
1.00mm Pitch Pico Clasp PCB Header Single Row Right Angle SMD Tin Plated Inner Positive Lock 10 Circuits Green
Available Stock
9,100
Estimated Ship Time:7-9 working days
14+
236+$0.2475
3,000+$0.2376
6,000+$0.2277
- +
Ext. Price(USD):$58.41
MOQ:236
Mult:1
SPQ:1
2.54mm Box Header, Double Row
Available Stock
2,498
Estimated Ship Time:6-12 working days
100+$0.1551
200+$0.15
- +
Ext. Price(USD):$25.12
MOQ:162
Mult:1
Available Stock
22
Estimated Ship Time:6-13 working days
1+$7.774
30+$6.102
510+$5.1084
1,020+$4.6332
- +
Ext. Price(USD):$15.54
MOQ:2
Mult:1
SPQ:1
25 / PageGoto