Other Card Edge Components

Results:

Other card edge components include specialized or supplementary connector products that are not grouped with standard edgeboard connectors, housings, contacts, adapters or accessories. Because products in this category can use different interface and mounting formats, begin with the manufacturer part number and datasheet, identify the actual connector type, and then compare its mating and PCB requirements.

Pass the Part Identity Checkpoint

The category name alone does not define a single connector format. Use the following identification sequence before comparing products or approving a substitute.

1
Capture the Manufacturer Part Number Record the complete part number, manufacturer and product series without removing suffixes.
2
Identify the Actual Connector Type Determine whether the part is a header, socket, card-edge connector or another specialized component.
3
Confirm the Mating Interface Establish whether the product connects to a PCB card edge, another PCB, a cable assembly or a separate connector.
4
Decode the Physical Format Compare positions, rows, pitch, orientation, mounting type and termination method.
5
Verify the Datasheet Confirm the mating drawing, recommended PCB layout, ratings, materials and compatible product series.

Use the Part Number as the Primary Identifier

Product descriptions can be shortened or normalized across distributor databases. The complete manufacturer part number provides the most reliable route to the original drawing and product specification.

Manufacturer + Base Part Number + Prefix and Suffix + Series

Prefixes and suffixes may identify contact finish, packaging, mounting variation, keying or another configuration detail. Compare the complete ordering code when evaluating replacements.

Determine What the Part Connects

Establish the connection path before interpreting positions, pitch or mounting details. Products in this category may serve different interconnection functions.

PCB ↔ PCB
Board connection Confirm the interface on both boards, installed spacing and mating orientation.
PCB ↔ Cable
Wire connection Identify the mating housing, contact system, wire range and termination method.
Card ↔ Host
Card-edge interface Check card thickness, conductive-finger arrangement, insertion geometry and keying.

Decode the Connector Format

Once the product type and mating interface are known, translate the mechanical specification into a comparable set of fields.

Connector type Header, socket, receptacle, card-edge connector or another specified component.
Positions and rows Confirm the total number of electrical positions and how they are distributed across rows.
Pitch Match the center-to-center spacing of contacts or terminals to the mating product and PCB.
Orientation Check straight, vertical, right-angle, top-entry or side-entry configuration as applicable.
Mounting and termination Verify surface mount or through-hole installation and the specified solder or contact termination.

Match the PCB Installation

The connector body may fit the available space while its terminals or recommended footprint remain incompatible with the board. Check the complete installation drawing.

PCB footprint Compare pad or hole locations, terminal pattern, tolerances and keep-out areas.
Installed envelope Check connector height, body width, card approach and surrounding component clearance.
Assembly process Confirm soldering method, mounting hardware, packaging and automated assembly requirements.

Confirm the Mating Component

A compatible pitch and position count do not establish a complete mating match. Use the manufacturer’s drawing or related-products list to verify the opposing connector, housing, contact or PCB interface.

✓ Mating manufacturer part number ✓ Compatible product series ✓ Contact gender and arrangement ✓ Keying and polarization ✓ Engagement and insertion depth ✓ Electrical and temperature ratings

Build a Verifiable Part Identity

Save the identifying and mating information together so that purchasing, engineering and incoming inspection use the same product definition.

Part identity record
Manufacturer + Part number | Connector type | Mating product | Positions × pitch | Mounting

If the required product is already identifiable as a complete edgeboard connector, housing, contact, adapter or accessory, browse Card Edge Connectors & Components to select the corresponding product group.

Read More
Other Card Edge ComponentsResults:
Comprehensive
Price Priority
Stock Priority
Image
Part Number
Description
Availability
Unit Price(USD)
Quantity
Operation
Conn Wire-to-Board M 8 POS 3mm Solder ST Top Entry TH T/R
Available Stock
1,000
Estimated Ship Time:6-13 working days
1+$1.7365
10+$1.4835
2,400+$0.9364
4,800+$0.9148
- +
Ext. Price(USD):$15.62
MOQ:9
Mult:1
SPQ:1
Samtec
ECAD Model:
IDC Connector, 10 Pos, 2.54mm IDT RA Cable Mount Tube
Available Stock
67
Estimated Ship Time:6-13 working days
1+$4.002
99+$2.9484
528+$2.6136
1,023+$2.4732
2,013+$2.268
- +
Ext. Price(USD):$16.00
MOQ:4
Mult:1
SPQ:1
Lumberg
ECAD Model:
Conn Shrouded Header HDR 3 POS 5mm Solder ST Thru-Hole Box
Available Stock
1,880
Estimated Ship Time:9-14 working days
10+$0.6361
200+$0.5148
5,000+$0.4102
10,000+$0.3906
- +
Ext. Price(USD):$26.08
MOQ:41
Mult:1
SPQ:1
Conn Open Pin Field Array HDR 180 POS 1.27mm Solder ST Top Entry SMD SEARAY™
Available Stock
125
Estimated Ship Time:7-9 working days
16+
8+$15.004
19+$14.399
79+$13.827
- +
Ext. Price(USD):$120.03
MOQ:8
Mult:1
SPQ:1
Unshrouded Header HDR 8 POS 1.27mm Solder RA Side Entry TH Tube
Available Stock
154
Estimated Ship Time:6-13 working days
1+$1.8745
58+$1.397
5,046+$0.7787
10,034+$0.715
- +
Ext. Price(USD):$14.99
MOQ:8
Mult:1
SPQ:1
Unshrouded Header, 10 Pos, 1.27mm Pitch, Solder RA Thru-Hole
Available Stock
1,036
Estimated Ship Time:6-12 working days
50+$0.3103
100+$0.2962
- +
Ext. Price(USD):$26.37
MOQ:85
Mult:5
Socket Strip, 18 POS, 2mm Pitch, Press Fit, ST, Thru-Hole
Available Stock
35
Estimated Ship Time:6-13 working days
1+$5.06
25+$4.5792
1,000+$3.4128
2,500+$3.0672
- +
Ext. Price(USD):$15.18
MOQ:3
Mult:1
SPQ:1
V23535A3280C401=BKMOD422 FEDER
Available Stock
2,545
Estimated Ship Time:7-10 working days
21+
25+$5.115
55+$5.027
150+$4.928
250+$4.84
- +
Ext. Price(USD):$127.87
MOQ:25
Mult:1
SPQ:1
Conn Board Stacker HDR 8 POS 2mm Solder ST Top Entry Thru-Hole
Available Stock
70
Estimated Ship Time:6-13 working days
1+$2.231
50+$2.057
5,000+$0.8899
10,000+$0.8143
- +
Ext. Price(USD):$15.61
MOQ:7
Mult:1
SPQ:1
Conn Wire to Board PL 31 POS 0.635mm Solder RA Side Entry Thru-Hole Box
Available Stock
53
Estimated Ship Time:9-14 working days
1+$4,053.7044
10+$3,972.6288
50+$3,893.184
100+$3,815.316
500+$3,739.014
- +
Ext. Price(USD):$4,053.70
MOQ:1
Mult:1
SPQ:1
Headers and PCB Receptacles, Micro Connectors
Available Stock
10
Estimated Ship Time:5-12 working days
1+$226.93
3+$217.745
5+$217.21
10+$216.3112
20+$213.5613
- +
Ext. Price(USD):$226.93
MOQ:1
Mult:1
SPQ:1
Conn Socket Strip SKT 30 POS 2mm Solder ST Thru-Hole Tube
Available Stock
7
Estimated Ship Time:6-13 working days
1+$13.3515
10+$12.528
260+$9.4716
507+$8.8992
- +
Ext. Price(USD):$26.70
MOQ:2
Mult:1
SPQ:1
44P Hybrid Header ASSY, A-A Key
Available Stock
44,745
Estimated Ship Time:7-9 working days
18+
45+$2.53
150+$2.431
500+$2.332
1,300+$2.244
3,900+$2.145
- +
Ext. Price(USD):$113.85
MOQ:45
Mult:1
SPQ:1
multicomp
ECAD Model:
Wire-to-Board HDR 8 POS 2.54mm Solder ST Top Entry TH
Available Stock
89,204
Estimated Ship Time:6-12 working days
200+$0.0752
- +
Ext. Price(USD):$25.04
MOQ:333
Mult:1
Conn Socket Strip SKT 18 POS 1.27mm Solder ST Top Entry Thru-Hole Tube
Available Stock
11
Estimated Ship Time:6-13 working days
1+$5.3705
25+$4.9032
1,029+$3.1644
2,548+$2.7324
- +
Ext. Price(USD):$16.11
MOQ:3
Mult:1
SPQ:1
Conn Board Stacker HDR 8 POS 2.54mm Solder ST Top Entry Thru-Hole
Available Stock
656
Estimated Ship Time:5-12 working days
50+$0.64
250+$0.5845
7,500+$0.3137
10,000+$0.2588
- +
Ext. Price(USD):$32.00
MOQ:50
Mult:1
SPQ:1
Available Stock
4,368
Estimated Ship Time:7-9 working days
18+
150+$0.836
350+$0.803
1,500+$0.77
3,800+$0.737
- +
Ext. Price(USD):$125.40
MOQ:150
Mult:1
SPQ:1
Conn Socket Strip RCP 16 POS 2.54mm Solder RA Thru-Hole
Available Stock
5
Estimated Ship Time:5-12 working days
1+$248.413
5+$241.0389
90+$87.0552
120+$85.3004
- +
Ext. Price(USD):$248.41
MOQ:1
Mult:1
SPQ:120
Conn Unshrouded Header HDR 18 POS 2.54mm Solder ST Top Entry Thru-Hole Bulk
Available Stock
362
Estimated Ship Time:6-13 working days
1+$1.6905
50+$1.452
5,000+$0.8467
10,000+$0.7787
- +
Ext. Price(USD):$15.21
MOQ:9
Mult:1
SPQ:1
Conn Socket Strip SKT 10 POS 1.27mm Solder ST Top Entry SMD TIGER CLAW™ T/R
Available Stock
5,866
Estimated Ship Time:7-9 working days
22+
1,375+$1.463
2,750+$1.243
5,500+$1.045
- +
Ext. Price(USD):$2,011.62
MOQ:1,375
Mult:1,375
SPQ:1,375
Wire to Board Connector Header 20 Pos 2.54mm Solder Straight Thru-Hole
Available Stock
460
Estimated Ship Time:5-10 working days
20+$3.6146
500+$3.5061
1,500+$3.3976
4,000+$3.3254
8,000+$3.2531
- +
Ext. Price(USD):$72.29
MOQ:20
Mult:20
Standard Card Edge Connectors 0.80 mm High-Speed Power/Signal Combo Edge Card Connector
Available Stock
1,650
Estimated Ship Time:7-9 working days
25+
275+$4.994
825+$4.048
2,200+$3.311
4,125+$2.673
- +
Ext. Price(USD):$1,373.35
MOQ:275
Mult:275
SPQ:275
Conn Unshrouded Header HDR 216 POS 2mm Press Fit ST Thru-Hole Bulk
Available Stock
2
Estimated Ship Time:6-13 working days
1+$51.227
10+$46.926
25+$46.116
50+$45.9108
100+$40.5432
- +
Ext. Price(USD):$51.22
MOQ:1
Mult:1
SPQ:1
Conn Shrouded Header (4 Sides) HDR 10 POS 1.27mm Solder ST Top Entry SMD TIGER EYE™ T/R
Available Stock
74
Estimated Ship Time:6-13 working days
1+$2.185
50+$1.727
1,900+$1.242
4,750+$1.2096
- +
Ext. Price(USD):$15.29
MOQ:7
Mult:1
SPQ:1
Conn Shrouded Header (4 Sides) HDR 50 POS 1.27mm Solder RA Thru-Hole Tube
Available Stock
13
Estimated Ship Time:6-13 working days
1+$22.241
30+$19.008
60+$18.9756
- +
Ext. Price(USD):$22.24
MOQ:1
Mult:1
SPQ:1
25 / PageGoto