Other Card Edge Components

Results:

Other card edge components include specialized or supplementary connector products that are not grouped with standard edgeboard connectors, housings, contacts, adapters or accessories. Because products in this category can use different interface and mounting formats, begin with the manufacturer part number and datasheet, identify the actual connector type, and then compare its mating and PCB requirements.

Pass the Part Identity Checkpoint

The category name alone does not define a single connector format. Use the following identification sequence before comparing products or approving a substitute.

1
Capture the Manufacturer Part Number Record the complete part number, manufacturer and product series without removing suffixes.
2
Identify the Actual Connector Type Determine whether the part is a header, socket, card-edge connector or another specialized component.
3
Confirm the Mating Interface Establish whether the product connects to a PCB card edge, another PCB, a cable assembly or a separate connector.
4
Decode the Physical Format Compare positions, rows, pitch, orientation, mounting type and termination method.
5
Verify the Datasheet Confirm the mating drawing, recommended PCB layout, ratings, materials and compatible product series.

Use the Part Number as the Primary Identifier

Product descriptions can be shortened or normalized across distributor databases. The complete manufacturer part number provides the most reliable route to the original drawing and product specification.

Manufacturer + Base Part Number + Prefix and Suffix + Series

Prefixes and suffixes may identify contact finish, packaging, mounting variation, keying or another configuration detail. Compare the complete ordering code when evaluating replacements.

Determine What the Part Connects

Establish the connection path before interpreting positions, pitch or mounting details. Products in this category may serve different interconnection functions.

PCB ↔ PCB
Board connection Confirm the interface on both boards, installed spacing and mating orientation.
PCB ↔ Cable
Wire connection Identify the mating housing, contact system, wire range and termination method.
Card ↔ Host
Card-edge interface Check card thickness, conductive-finger arrangement, insertion geometry and keying.

Decode the Connector Format

Once the product type and mating interface are known, translate the mechanical specification into a comparable set of fields.

Connector type Header, socket, receptacle, card-edge connector or another specified component.
Positions and rows Confirm the total number of electrical positions and how they are distributed across rows.
Pitch Match the center-to-center spacing of contacts or terminals to the mating product and PCB.
Orientation Check straight, vertical, right-angle, top-entry or side-entry configuration as applicable.
Mounting and termination Verify surface mount or through-hole installation and the specified solder or contact termination.

Match the PCB Installation

The connector body may fit the available space while its terminals or recommended footprint remain incompatible with the board. Check the complete installation drawing.

PCB footprint Compare pad or hole locations, terminal pattern, tolerances and keep-out areas.
Installed envelope Check connector height, body width, card approach and surrounding component clearance.
Assembly process Confirm soldering method, mounting hardware, packaging and automated assembly requirements.

Confirm the Mating Component

A compatible pitch and position count do not establish a complete mating match. Use the manufacturer’s drawing or related-products list to verify the opposing connector, housing, contact or PCB interface.

✓ Mating manufacturer part number ✓ Compatible product series ✓ Contact gender and arrangement ✓ Keying and polarization ✓ Engagement and insertion depth ✓ Electrical and temperature ratings

Build a Verifiable Part Identity

Save the identifying and mating information together so that purchasing, engineering and incoming inspection use the same product definition.

Part identity record
Manufacturer + Part number | Connector type | Mating product | Positions × pitch | Mounting

If the required product is already identifiable as a complete edgeboard connector, housing, contact, adapter or accessory, browse Card Edge Connectors & Components to select the corresponding product group.

Read More
Other Card Edge ComponentsResults:
Comprehensive
Price Priority
Stock Priority
Image
Part Number
Description
Availability
Unit Price(USD)
Quantity
Operation
Header Housing Assy EP 2.5 RA 5 Pos.
Available Stock
32,977
Estimated Ship Time:7-9 working days
19+
650+$0.1782
1,700+$0.1705
6,800+$0.1639
17,500+$0.1573
- +
Ext. Price(USD):$115.83
MOQ:650
Mult:1
SPQ:1
Samtec
ECAD Model:
Conn Unshrouded Header HDR 12 POS 5.08mm Solder ST Top Entry Thru-Hole Bulk
Available Stock
850
Estimated Ship Time:7-9 working days
22+
1+$4.301
50+$3.509
5,000+$1.386
10,000+$0.968
- +
Ext. Price(USD):$30.10
MOQ:7
Mult:1
SPQ:1
JST
ECAD Model:
JST 6.2mm Pitch 3-Pin Wire-to-Board Conn, VL Series, Right Angle TH
Available Stock
1,430
Estimated Ship Time:5-10 working days
25+$0.8336
50+$0.8132
- +
Ext. Price(USD):$20.84
MOQ:25
Mult:5
JST
ECAD Model:
Conn Shrouded Header HDR 15 POS 2mm Solder ST SMD T/R
Available Stock
593
Estimated Ship Time:9-14 working days
25+$0.9474
50+$0.902
100+$0.8589
250+$0.8051
- +
Ext. Price(USD):$26.52
MOQ:28
Mult:1
SPQ:1
Wurth Elektronik WR-WTB Series 2.5mm Pitch 2-Pin Single Row Header, Right Angle
Available Stock
150
Estimated Ship Time:5-10 working days
10+$0.1848
250+$0.181
500+$0.1772
- +
Ext. Price(USD):$7.39
MOQ:40
Mult:10
TE Connectivity 2.54mm Pitch 32-Pin Single Row Receptacle, AMPMODU MOD II Series, Right Angle, TH
Available Stock
48
Estimated Ship Time:5-10 working days
1+$8.6929
250+$8.5144
500+$8.336
- +
Ext. Price(USD):$8.69
MOQ:1
Mult:1
Samtec
ECAD Model:
Ultra Low Profile Header and Socket
Available Stock
1,791
Estimated Ship Time:5-12 working days
10+$6.664
50+$4.147
5,000+$2.0116
7,500+$2.0009
- +
Ext. Price(USD):$66.64
MOQ:10
Mult:1
SPQ:1
Samtec
ECAD Model:
Socket Strip SKT 40 POS 2.54mm Solder ST Top Entry Thru-Hole Tube
Available Stock
8
Estimated Ship Time:6-13 working days
1+$26.2085
11+$18.4572
253+$13.4136
506+$13.176
- +
Ext. Price(USD):$26.20
MOQ:1
Mult:1
SPQ:1
Wire-to-Board HDR, 3 Pos, 2.54mm Pitch, Solder, ST Top Entry, TH, Bulk
Available Stock
350
Estimated Ship Time:6-13 working days
10+$1.0051
50+$0.8756
500+$0.5843
1,000+$0.4622
2,000+$0.4266
- +
Ext. Price(USD):$14.07
MOQ:14
Mult:1
SPQ:1
multicomp
ECAD Model:
WTB CONN, HEADER, R/A, 5POS, 1ROW, 2MM;
Available Stock
2,686
Estimated Ship Time:6-12 working days
200+$0.067
- +
Ext. Price(USD):$25.05
MOQ:374
Mult:1
Samtec
ECAD Model:
Unshrouded Header, HDR, 1 Pos, Solder, ST, Top Entry, Thru-Hole, Bulk
Available Stock
816
Estimated Ship Time:6-13 working days
1+$0.322
50+$0.3174
2,000+$0.1242
5,000+$0.108
- +
Ext. Price(USD):$14.16
MOQ:44
Mult:1
SPQ:1
Unshrouded Header HDR 40 POS 2.54mm Solder Straight Top Entry Thru-Hole
Available Stock
48
Estimated Ship Time:6-13 working days
1+$4.347
25+$4.015
1,000+$3.0132
2,500+$2.8728
- +
Ext. Price(USD):$17.38
MOQ:4
Mult:1
SPQ:1
Conn Fine Pitch Connector RCP 80 POS 0.8mm Solder ST SMD Tube
Available Stock
3,168
Estimated Ship Time:5-12 working days
11+$3.657
55+$3.135
2,508+$2.7713
5,005+$2.7285
- +
Ext. Price(USD):$40.22
MOQ:11
Mult:1
SPQ:11
Board Stacker HDR 42 POS 2.54mm Solder ST Top Entry TH
Available Stock
9
Estimated Ship Time:6-13 working days
1+$6.5205
25+$5.886
500+$4.7088
1,000+$4.212
- +
Ext. Price(USD):$19.56
MOQ:3
Mult:1
SPQ:1
Conn Shrouded Header HDR 32 POS 2mm Solder ST SMD T/R
Available Stock
20
Estimated Ship Time:5-10 working days
5+$3.5332
25+$3.4721
50+$3.3854
125+$3.3013
250+$3.2171
- +
Ext. Price(USD):$17.66
MOQ:5
Mult:5
Pancon
ECAD Model:
Conn Wire to Board HDR 6 POS 3.96mm Solder ST Thru-Hole Bag
Available Stock
2,550
Estimated Ship Time:5-12 working days
100+$0.3907
500+$0.3343
10,000+$0.2574
15,000+$0.2541
- +
Ext. Price(USD):$39.07
MOQ:100
Mult:100
SPQ:100
PCB Mount Header Vertical 6 Position 2.5 mm [.098 in] Centerline Fully Shrouded Tin (Sn) Through Hole - Solder Signal AMP Signal Double Lock
Available Stock
12,960
Estimated Ship Time:7-9 working days
16+
323+$0.341
- +
Ext. Price(USD):$110.14
MOQ:323
Mult:1
SPQ:1
Conn Board Stacker HDR 4 POS 2mm Solder ST Top Entry Thru-Hole Bulk
Available Stock
365
Estimated Ship Time:6-13 working days
1+$0.7935
50+$0.7524
5,000+$0.2668
10,000+$0.2074
- +
Ext. Price(USD):$14.28
MOQ:18
Mult:1
SPQ:1
Wire-to-Board Connector HDR 2 POS 5mm Pitch Solder RA Side Entry Thru-Hole Box
Available Stock
2,305
Estimated Ship Time:6-13 working days
50+$0.2266
100+$0.2185
1,200+$0.1588
5,400+$0.1534
- +
Ext. Price(USD):$14.04
MOQ:62
Mult:1
SPQ:1
Molex
ECAD Model:
1.00mm Pitch Pico Clasp PCB Header Single Row Right Angle SMD Tin Plated Inner Positive Lock 15 Circuits Red
Available Stock
10,400
Estimated Ship Time:7-9 working days
19+
201+$0.2904
3,000+$0.2783
5,000+$0.2673
- +
Ext. Price(USD):$58.37
MOQ:201
Mult:1
SPQ:1
Elevated Shrouded Header, HDR, 10-Pos, 2mm Pitch, Solder, ST, Thru-Hole
Available Stock
65
Estimated Ship Time:7-9 working days
19+
1+$6.919
25+$6.259
50+$5.819
- +
Ext. Price(USD):$34.59
MOQ:5
Mult:1
SPQ:1
Unshrouded Header HDR, 12 POS, 2.54mm, Solder RA Side Entry, TH, Bulk
Available Stock
160
Estimated Ship Time:6-13 working days
1+$1.587
50+$1.254
5,000+$0.661
10,000+$0.5918
- +
Ext. Price(USD):$14.28
MOQ:9
Mult:1
SPQ:1
CONN SPRING PISTON 6POS PCB
Available Stock
477
Estimated Ship Time:9-14 working days
1+$17.496
10+$14.864
25+$13.9333
50+$13.2682
100+$12.9397
- +
Ext. Price(USD):$34.99
MOQ:2
Mult:1
SPQ:1
Straight Cable and Plated Thru H
Available Stock
75
Estimated Ship Time:9-14 working days
1+$314.4312
10+$308.1456
50+$301.9788
100+$295.9416
500+$290.0232
- +
Ext. Price(USD):$314.43
MOQ:1
Mult:1
SPQ:1
Pancon
ECAD Model:
IDC Connector F 7 POS 2.54mm IDT RA Cable Mount Bag
Available Stock
1,350
Estimated Ship Time:5-12 working days
100+$0.5116
500+$0.4378
10,000+$0.3425
15,000+$0.3417
- +
Ext. Price(USD):$51.16
MOQ:100
Mult:100
SPQ:100
25 / PageGoto