Other Card Edge Components

Results:

Other card edge components include specialized or supplementary connector products that are not grouped with standard edgeboard connectors, housings, contacts, adapters or accessories. Because products in this category can use different interface and mounting formats, begin with the manufacturer part number and datasheet, identify the actual connector type, and then compare its mating and PCB requirements.

Pass the Part Identity Checkpoint

The category name alone does not define a single connector format. Use the following identification sequence before comparing products or approving a substitute.

1
Capture the Manufacturer Part Number Record the complete part number, manufacturer and product series without removing suffixes.
2
Identify the Actual Connector Type Determine whether the part is a header, socket, card-edge connector or another specialized component.
3
Confirm the Mating Interface Establish whether the product connects to a PCB card edge, another PCB, a cable assembly or a separate connector.
4
Decode the Physical Format Compare positions, rows, pitch, orientation, mounting type and termination method.
5
Verify the Datasheet Confirm the mating drawing, recommended PCB layout, ratings, materials and compatible product series.

Use the Part Number as the Primary Identifier

Product descriptions can be shortened or normalized across distributor databases. The complete manufacturer part number provides the most reliable route to the original drawing and product specification.

Manufacturer + Base Part Number + Prefix and Suffix + Series

Prefixes and suffixes may identify contact finish, packaging, mounting variation, keying or another configuration detail. Compare the complete ordering code when evaluating replacements.

Determine What the Part Connects

Establish the connection path before interpreting positions, pitch or mounting details. Products in this category may serve different interconnection functions.

PCB ↔ PCB
Board connection Confirm the interface on both boards, installed spacing and mating orientation.
PCB ↔ Cable
Wire connection Identify the mating housing, contact system, wire range and termination method.
Card ↔ Host
Card-edge interface Check card thickness, conductive-finger arrangement, insertion geometry and keying.

Decode the Connector Format

Once the product type and mating interface are known, translate the mechanical specification into a comparable set of fields.

Connector type Header, socket, receptacle, card-edge connector or another specified component.
Positions and rows Confirm the total number of electrical positions and how they are distributed across rows.
Pitch Match the center-to-center spacing of contacts or terminals to the mating product and PCB.
Orientation Check straight, vertical, right-angle, top-entry or side-entry configuration as applicable.
Mounting and termination Verify surface mount or through-hole installation and the specified solder or contact termination.

Match the PCB Installation

The connector body may fit the available space while its terminals or recommended footprint remain incompatible with the board. Check the complete installation drawing.

PCB footprint Compare pad or hole locations, terminal pattern, tolerances and keep-out areas.
Installed envelope Check connector height, body width, card approach and surrounding component clearance.
Assembly process Confirm soldering method, mounting hardware, packaging and automated assembly requirements.

Confirm the Mating Component

A compatible pitch and position count do not establish a complete mating match. Use the manufacturer’s drawing or related-products list to verify the opposing connector, housing, contact or PCB interface.

✓ Mating manufacturer part number ✓ Compatible product series ✓ Contact gender and arrangement ✓ Keying and polarization ✓ Engagement and insertion depth ✓ Electrical and temperature ratings

Build a Verifiable Part Identity

Save the identifying and mating information together so that purchasing, engineering and incoming inspection use the same product definition.

Part identity record
Manufacturer + Part number | Connector type | Mating product | Positions × pitch | Mounting

If the required product is already identifiable as a complete edgeboard connector, housing, contact, adapter or accessory, browse Card Edge Connectors & Components to select the corresponding product group.

Read More
Other Card Edge ComponentsResults:
Comprehensive
Price Priority
Stock Priority
Image
Part Number
Description
Availability
Unit Price(USD)
Quantity
Operation
Conn Board Stacker HDR 7 POS 2mm Solder ST Top Entry Thru-Hole
Available Stock
460
Estimated Ship Time:9-14 working days
1+$6.058
- +
Ext. Price(USD):$30.29
MOQ:5
Mult:1
SPQ:1
Socket Strip SKT 2 POS 2.54mm Press Fit ST Top Entry Thru-Hole Bulk
Available Stock
236
Estimated Ship Time:6-13 working days
1+$1.4375
50+$1.155
5,000+$0.6264
10,000+$0.5854
- +
Ext. Price(USD):$14.37
MOQ:10
Mult:1
SPQ:1
Conn Unshrouded Header HDR 14 POS 2.54mm Solder ST Top Entry Thru-Hole Automotive Carton
Available Stock
307
Estimated Ship Time:7-9 working days
20+
54+$2.068
166+$1.969
- +
Ext. Price(USD):$111.67
MOQ:54
Mult:1
SPQ:1
Conn Shrouded Header HDR 10 POS 0.8mm Solder ST SMD T/R
Available Stock
221
Estimated Ship Time:6-13 working days
1+$5.3475
50+$4.2444
750+$2.6568
1,875+$2.43
- +
Ext. Price(USD):$16.04
MOQ:3
Mult:1
SPQ:1
Lumberg
ECAD Model:
Lumberg 2.5mm Pitch 4-Pin Single Row Wire-to-Board Connector, Minimodul Series, Right Angle, TH
Available Stock
40
Estimated Ship Time:5-10 working days
10+$0.4499
70+$0.4397
130+$0.4308
- +
Ext. Price(USD):$8.99
MOQ:20
Mult:10
Molex
ECAD Model:
Conn Shrouded Header (4 Sides) HDR 14 POS 2.54mm Solder RA Thru-Hole H-DAC 64™ Automotive Tube
Available Stock
50
Estimated Ship Time:9-14 working days
50+$12.201
100+$11.9569
500+$11.7178
1,000+$11.4834
5,000+$11.2537
- +
Ext. Price(USD):$610.05
MOQ:50
Mult:50
SPQ:1
Conn Board Stacker HDR 42 POS 2.54mm Solder ST Top Entry SMD
Available Stock
368
Estimated Ship Time:6-13 working days
1+$7.222
30+$6.75
500+$4.8816
1,000+$4.5684
- +
Ext. Price(USD):$14.44
MOQ:2
Mult:1
SPQ:1
Conn Ejector Header HDR 24 POS 2mm Solder ST Top Entry Thru-Hole Tube
Available Stock
18
Estimated Ship Time:6-13 working days
1+$16.9855
10+$15.9408
252+$10.5624
504+$9.1584
- +
Ext. Price(USD):$16.98
MOQ:1
Mult:1
SPQ:1
Wire-to-Board HDR, 2 POS, 4.2mm, RA, Thru-Hole
Available Stock
1,680
Estimated Ship Time:7-9 working days
21+
80+$0.748
400+$0.737
800+$0.726
1,600+$0.704
1,680+$0.693
- +
Ext. Price(USD):$59.84
MOQ:80
Mult:1
SPQ:1
Conn Board Stacker HDR 28 POS 2mm Solder ST Top Entry Thru-Hole
Available Stock
213
Estimated Ship Time:7-9 working days
23+
1+$4.136
25+$3.872
2,500+$1.65
5,000+$1.265
- +
Ext. Price(USD):$33.08
MOQ:8
Mult:1
SPQ:1
Molex
ECAD Model:
1.00mm Pitch Pico Clasp PCB Header Single Row Right Angle SMD Tin Plated Inner Positive Lock 14 Circuits Blue
Available Stock
5,200
Estimated Ship Time:7-9 working days
23+
210+$0.2783
3,000+$0.2684
5,000+$0.2563
- +
Ext. Price(USD):$58.44
MOQ:210
Mult:1
SPQ:1
Samtec
Package:SMD,P=1.27mm
ECAD Model:
Conn Open Pin Field Array F 160 POS 1.27mm Solder ST Top Entry SMD T/R
Available Stock
110
Estimated Ship Time:9-14 working days
1+$21.8052
10+$18.5296
25+$17.3694
50+$16.5404
100+$16.3604
- +
Ext. Price(USD):$43.61
MOQ:2
Mult:1
SPQ:1
Conn Unshrouded Header HDR 64 POS 1.27mm Solder ST Top Entry Thru-Hole Tube
Available Stock
190
Estimated Ship Time:6-13 working days
1+$7.3945
28+$6.9336
112+$5.8968
504+$5.7348
1,008+$5.616
- +
Ext. Price(USD):$14.78
MOQ:2
Mult:1
SPQ:1
Molex
ECAD Model:
Conn Shrouded Header (4 Sides) HDR 30 POS 2.3mm/2.54mm/2.95mm/3.5mm Solder RA Side Entry Thru-Hole Stac64™ Automotive Tray
Available Stock
560
Estimated Ship Time:7-9 working days
18+
42+$2.783
150+$2.739
250+$2.695
450+$2.651
- +
Ext. Price(USD):$116.88
MOQ:42
Mult:1
SPQ:1
TERM BLOCK HDR 10POS 5MM
Available Stock
171
Estimated Ship Time:9-14 working days
1+$3.7476
10+$2.6719
1,000+$1.568
5,000+$1.4352
- +
Ext. Price(USD):$26.23
MOQ:7
Mult:1
SPQ:1
CONN SOCKET 6POS .100" GOLD PCB
Available Stock
1,594
Estimated Ship Time:9-14 working days
1+$0.3456
1,000+$0.3232
5,000+$0.2722
10,000+$0.2041
- +
Ext. Price(USD):$26.26
MOQ:76
Mult:1
SPQ:1
Conn Header, SEALED RECEPTACLE HOUSINGS, 4-ROWS, CONNECTOR
Available Stock
420
Estimated Ship Time:7-9 working days
15+
50+$2.365
150+$2.321
250+$2.277
- +
Ext. Price(USD):$118.25
MOQ:50
Mult:1
SPQ:1
Conn Socket Strip SKT 9 POS 2.54mm Wire Wrap RA Thru-Hole Bulk
Available Stock
129
Estimated Ship Time:6-13 working days
1+$1.955
50+$1.518
5,000+$0.8305
10,000+$0.8122
- +
Ext. Price(USD):$15.64
MOQ:8
Mult:1
SPQ:1
Available Stock
650
Estimated Ship Time:5-12 working days
100+$1.573
300+$1.54
7,500+$1.3375
10,000+$1.2733
- +
Ext. Price(USD):$157.30
MOQ:100
Mult:100
SPQ:100
Molex
ECAD Model:
0.35 B/B Plug Assembly, 34 Contact
Available Stock
375,000
Estimated Ship Time:7-9 working days
19+
600+$0.1045
3,000+$0.1001
12,100+$0.0968
31,300+$0.0935
98,700+$0.0891
- +
Ext. Price(USD):$62.70
MOQ:600
Mult:1
SPQ:1
Molex
ECAD Model:
Unshrouded Header HDR 10 POS 2.54mm Solder ST SMD Tube
Available Stock
600
Estimated Ship Time:5-12 working days
50+$2.805
100+$1.441
200+$0.6358
400+$0.5555
- +
Ext. Price(USD):$140.25
MOQ:50
Mult:1
SPQ:1
Conn Wire to Board HDR 32 POS 2.54mm Solder ST Thru-Hole
Available Stock
110
Estimated Ship Time:5-10 working days
10+$36.17
250+$35.085
750+$33.9999
2,000+$33.2764
4,000+$32.5528
- +
Ext. Price(USD):$361.70
MOQ:10
Mult:10
Samtec
ECAD Model:
Conn Shrouded Header (4 Sides) HDR 40 POS 1mm Solder ST Top Entry SMD Micro Mate™ T/R
Available Stock
1,339
Estimated Ship Time:6-13 working days
1+$3.404
25+$3.047
975+$2.6352
2,275+$2.5164
- +
Ext. Price(USD):$17.02
MOQ:5
Mult:1
SPQ:1
Available Stock
99
Estimated Ship Time:5-12 working days
25+$0.7856
250+$0.7033
7,500+$0.3336
10,000+$0.2628
- +
Ext. Price(USD):$30.63
MOQ:39
Mult:1
SPQ:1
Conn Wire to Board HDR 6 POS 5mm Solder RA Side Entry Thru-Hole Box
Available Stock
386
Estimated Ship Time:6-13 working days
10+$0.6153
25+$0.5543
540+$0.3845
1,080+$0.3532
- +
Ext. Price(USD):$14.41
MOQ:26
Mult:1
SPQ:1
25 / PageGoto