Other Card Edge Components

Results:

Other card edge components include specialized or supplementary connector products that are not grouped with standard edgeboard connectors, housings, contacts, adapters or accessories. Because products in this category can use different interface and mounting formats, begin with the manufacturer part number and datasheet, identify the actual connector type, and then compare its mating and PCB requirements.

Pass the Part Identity Checkpoint

The category name alone does not define a single connector format. Use the following identification sequence before comparing products or approving a substitute.

1
Capture the Manufacturer Part Number Record the complete part number, manufacturer and product series without removing suffixes.
2
Identify the Actual Connector Type Determine whether the part is a header, socket, card-edge connector or another specialized component.
3
Confirm the Mating Interface Establish whether the product connects to a PCB card edge, another PCB, a cable assembly or a separate connector.
4
Decode the Physical Format Compare positions, rows, pitch, orientation, mounting type and termination method.
5
Verify the Datasheet Confirm the mating drawing, recommended PCB layout, ratings, materials and compatible product series.

Use the Part Number as the Primary Identifier

Product descriptions can be shortened or normalized across distributor databases. The complete manufacturer part number provides the most reliable route to the original drawing and product specification.

Manufacturer + Base Part Number + Prefix and Suffix + Series

Prefixes and suffixes may identify contact finish, packaging, mounting variation, keying or another configuration detail. Compare the complete ordering code when evaluating replacements.

Determine What the Part Connects

Establish the connection path before interpreting positions, pitch or mounting details. Products in this category may serve different interconnection functions.

PCB ↔ PCB
Board connection Confirm the interface on both boards, installed spacing and mating orientation.
PCB ↔ Cable
Wire connection Identify the mating housing, contact system, wire range and termination method.
Card ↔ Host
Card-edge interface Check card thickness, conductive-finger arrangement, insertion geometry and keying.

Decode the Connector Format

Once the product type and mating interface are known, translate the mechanical specification into a comparable set of fields.

Connector type Header, socket, receptacle, card-edge connector or another specified component.
Positions and rows Confirm the total number of electrical positions and how they are distributed across rows.
Pitch Match the center-to-center spacing of contacts or terminals to the mating product and PCB.
Orientation Check straight, vertical, right-angle, top-entry or side-entry configuration as applicable.
Mounting and termination Verify surface mount or through-hole installation and the specified solder or contact termination.

Match the PCB Installation

The connector body may fit the available space while its terminals or recommended footprint remain incompatible with the board. Check the complete installation drawing.

PCB footprint Compare pad or hole locations, terminal pattern, tolerances and keep-out areas.
Installed envelope Check connector height, body width, card approach and surrounding component clearance.
Assembly process Confirm soldering method, mounting hardware, packaging and automated assembly requirements.

Confirm the Mating Component

A compatible pitch and position count do not establish a complete mating match. Use the manufacturer’s drawing or related-products list to verify the opposing connector, housing, contact or PCB interface.

✓ Mating manufacturer part number ✓ Compatible product series ✓ Contact gender and arrangement ✓ Keying and polarization ✓ Engagement and insertion depth ✓ Electrical and temperature ratings

Build a Verifiable Part Identity

Save the identifying and mating information together so that purchasing, engineering and incoming inspection use the same product definition.

Part identity record
Manufacturer + Part number | Connector type | Mating product | Positions × pitch | Mounting

If the required product is already identifiable as a complete edgeboard connector, housing, contact, adapter or accessory, browse Card Edge Connectors & Components to select the corresponding product group.

Read More
Other Card Edge ComponentsResults:
Comprehensive
Price Priority
Stock Priority
Image
Part Number
Description
Availability
Unit Price(USD)
Quantity
Operation
Molex
ECAD Model:
Conn Shrouded Header (4 Sides) HDR 8 POS 2.54mm Solder RA Side Entry Thru-Hole C-Grid III Tray
Available Stock
50
Estimated Ship Time:9-14 working days
50+$10.8
100+$10.584
500+$10.3723
1,000+$10.1649
5,000+$9.9616
- +
Ext. Price(USD):$540.00
MOQ:50
Mult:50
SPQ:1
Conn Shrouded Header (4 Sides), HDR 4Power/48Signal Pos, 1.88mm/2mm, Solder ST Top Entry Thru-Hole PowerStrip™ Bulk
Available Stock
11
Estimated Ship Time:6-13 working days
1+$7.866
25+$6.7608
504+$5.8104
1,008+$5.5296
- +
Ext. Price(USD):$15.73
MOQ:2
Mult:1
SPQ:1
Phoenix Contact PCB Connector Kit, 8/12-MH, FP 0 Series, Includes SMD Plug
Available Stock
775
Estimated Ship Time:9-14 working days
1+$9.464
- +
Ext. Price(USD):$28.39
MOQ:3
Mult:1
SPQ:1
Samtec
ECAD Model:
Available Stock
12
Estimated Ship Time:6-13 working days
1+$9.039
12+$8.327
504+$6.0156
1,008+$5.9292
- +
Ext. Price(USD):$18.07
MOQ:2
Mult:1
SPQ:1
Samtec
ECAD Model:
Conn Unshrouded Header HDR 6 POS 2.54mm Solder ST Top Entry Thru-Hole Tube
Available Stock
58
Estimated Ship Time:6-13 working days
1+$1.3685
38+$1.243
114+$0.7766
532+$0.7463
1,026+$0.7376
- +
Ext. Price(USD):$15.05
MOQ:11
Mult:1
SPQ:1
Conn Socket Strip SKT 24 POS 2mm Press Fit ST Thru-Hole Layer
Available Stock
25
Estimated Ship Time:6-13 working days
1+$6.4285
25+$5.5944
100+$5.3676
500+$4.6008
1,000+$4.4496
- +
Ext. Price(USD):$19.28
MOQ:3
Mult:1
SPQ:1
Conn Wire to Board PL 47 POS 1.9mm Solder Cup ST Top Entry Panel Mount
Available Stock
51
Estimated Ship Time:9-14 working days
1+$351.324
10+$344.2932
50+$337.4028
100+$330.6636
500+$324.0432
- +
Ext. Price(USD):$351.32
MOQ:1
Mult:1
SPQ:1
Molex
ECAD Model:
Wire-to-Board Connector, Plug, 8 Power Pos, 2mm/2.5mm Pitch, Solder RA Thru-Hole Tray
Available Stock
100
Estimated Ship Time:3-4 weeks
25+
49+$11.66
97+$11.429
- +
Ext. Price(USD):$1,002.76
MOQ:86
Mult:1
SPQ:1
MIL-DTL-55302 Series Connector
Available Stock
28
Estimated Ship Time:9-14 working days
1+$277.8084
100+$272.2572
500+$266.814
1,000+$261.468
5,000+$256.2408
- +
Ext. Price(USD):$277.80
MOQ:1
Mult:1
SPQ:1
Conn IDC Connector F 10 POS 3.96mm IDT RA Side Entry Cable Mount MAS-CON®
Available Stock
930
Estimated Ship Time:5-12 working days
25+$1.4283
50+$1.3877
750+$0.9234
1,000+$0.9052
- +
Ext. Price(USD):$35.70
MOQ:25
Mult:1
SPQ:100
Samtec
ECAD Model:
IDC Connector M 16 POS 2.54mm IDT RA Cable Mount Tube
Available Stock
35
Estimated Ship Time:6-13 working days
1+$5.7845
23+$5.3676
506+$4.32
1,012+$4.0824
- +
Ext. Price(USD):$17.35
MOQ:3
Mult:1
SPQ:1
Conn Unshrouded Header HDR 3 POS 2.54mm Solder ST Top Entry Thru-Hole Carton
Available Stock
11,309
Estimated Ship Time:7-9 working days
19+
500+$0.2244
1,300+$0.2156
5,400+$0.2068
- +
Ext. Price(USD):$112.20
MOQ:500
Mult:1
SPQ:1
Conn Board Stacker HDR 15 POS 2mm Solder ST Top Entry Thru-Hole Bulk
Available Stock
89
Estimated Ship Time:6-13 working days
1+$2.8175
50+$2.6028
2,000+$1.5984
5,000+$1.4688
- +
Ext. Price(USD):$14.08
MOQ:5
Mult:1
SPQ:1
Conn Board Stacker HDR 10 POS 2mm Solder ST Top Entry Thru-Hole
Available Stock
1,079
Estimated Ship Time:5-12 working days
1+$1.334
250+$1.122
7,500+$0.4852
10,000+$0.3821
- +
Ext. Price(USD):$30.68
MOQ:23
Mult:1
SPQ:1
Conn Board Stacker HDR 12 POS 2mm Solder ST Top Entry SMD Tube
Available Stock
77
Estimated Ship Time:6-13 working days
1+$2.1045
47+$1.936
1,034+$1.3284
2,021+$1.2636
- +
Ext. Price(USD):$14.73
MOQ:7
Mult:1
SPQ:1
Harwin
ECAD Model:
Connector, Datamate F, 6 Pos, 2mm Pitch, Solder, ST, Thru-Hole, Tube
Available Stock
192
Estimated Ship Time:9-14 working days
1+$15.2712
16+$12.5564
112+$10.9456
512+$9.8334
1,008+$9.3751
- +
Ext. Price(USD):$30.54
MOQ:2
Mult:1
SPQ:1
Available Stock
32
Estimated Ship Time:5-12 working days
10+$2.2655
100+$1.936
5,000+$1.7227
7,500+$1.712
- +
Ext. Price(USD):$31.71
MOQ:14
Mult:1
SPQ:1
0.100 Inch High-Temp Shrouded Terminal Strip, Cable Mate
Available Stock
1,350
Estimated Ship Time:7-9 working days
22+
150+$1.837
1,050+$1.452
- +
Ext. Price(USD):$275.55
MOQ:150
Mult:150
SPQ:150
Molex
ECAD Model:
Conn Wire to Board HDR 4 POS 10mm Solder ST Top Entry Thru-Hole Tray
Available Stock
26
Estimated Ship Time:9-14 working days
25+$23.6814
50+$23.2079
100+$22.7437
500+$22.2889
1,000+$21.8431
- +
Ext. Price(USD):$592.03
MOQ:25
Mult:25
SPQ:1
Molex
ECAD Model:
Shrouded Header (4 Sides), HDR 2 Pos, 2.5mm, Solder RA, Thru-Hole
Available Stock
16,100
Estimated Ship Time:7-9 working days
22+
700+$0.1078
6,300+$0.1023
12,600+$0.0979
- +
Ext. Price(USD):$75.46
MOQ:700
Mult:700
SPQ:700
Available Stock
65
Estimated Ship Time:5-12 working days
25+$1.7825
100+$1.518
5,000+$1.3589
7,500+$1.3482
- +
Ext. Price(USD):$44.56
MOQ:25
Mult:1
SPQ:1
JST
ECAD Model:
Disconnectable Crimp Style Connectors
Available Stock
14,880
Estimated Ship Time:6-13 working days
25+$0.184
100+$0.1645
2,500+$0.1015
5,000+$0.081
- +
Ext. Price(USD):$14.16
MOQ:77
Mult:1
SPQ:1
Available Stock
97
Estimated Ship Time:6-13 working days
1+$3.4845
40+$3.1752
1,000+$2.052
2,000+$1.9656
- +
Ext. Price(USD):$17.42
MOQ:5
Mult:1
SPQ:1
Molex
ECAD Model:
Unshrouded Header HDR 3 Pos 5.08mm Solder ST Thru-Hole SPOX™ Bag
Available Stock
498
Estimated Ship Time:5-12 working days
40+$3.333
100+$1.474
2,000+$0.3542
2,538+$0.3488
- +
Ext. Price(USD):$133.32
MOQ:40
Mult:1
SPQ:1
Conn Shrouded Header (2 Sides) HDR 3 POS 5mm Solder ST Top Entry Thru-Hole Box
Available Stock
1,650
Estimated Ship Time:6-13 working days
25+$0.3657
50+$0.3117
900+$0.1728
5,400+$0.1652
- +
Ext. Price(USD):$14.26
MOQ:39
Mult:1
SPQ:1
25 / PageGoto