Other Card Edge Components

Results:

Other card edge components include specialized or supplementary connector products that are not grouped with standard edgeboard connectors, housings, contacts, adapters or accessories. Because products in this category can use different interface and mounting formats, begin with the manufacturer part number and datasheet, identify the actual connector type, and then compare its mating and PCB requirements.

Pass the Part Identity Checkpoint

The category name alone does not define a single connector format. Use the following identification sequence before comparing products or approving a substitute.

1
Capture the Manufacturer Part Number Record the complete part number, manufacturer and product series without removing suffixes.
2
Identify the Actual Connector Type Determine whether the part is a header, socket, card-edge connector or another specialized component.
3
Confirm the Mating Interface Establish whether the product connects to a PCB card edge, another PCB, a cable assembly or a separate connector.
4
Decode the Physical Format Compare positions, rows, pitch, orientation, mounting type and termination method.
5
Verify the Datasheet Confirm the mating drawing, recommended PCB layout, ratings, materials and compatible product series.

Use the Part Number as the Primary Identifier

Product descriptions can be shortened or normalized across distributor databases. The complete manufacturer part number provides the most reliable route to the original drawing and product specification.

Manufacturer + Base Part Number + Prefix and Suffix + Series

Prefixes and suffixes may identify contact finish, packaging, mounting variation, keying or another configuration detail. Compare the complete ordering code when evaluating replacements.

Determine What the Part Connects

Establish the connection path before interpreting positions, pitch or mounting details. Products in this category may serve different interconnection functions.

PCB ↔ PCB
Board connection Confirm the interface on both boards, installed spacing and mating orientation.
PCB ↔ Cable
Wire connection Identify the mating housing, contact system, wire range and termination method.
Card ↔ Host
Card-edge interface Check card thickness, conductive-finger arrangement, insertion geometry and keying.

Decode the Connector Format

Once the product type and mating interface are known, translate the mechanical specification into a comparable set of fields.

Connector type Header, socket, receptacle, card-edge connector or another specified component.
Positions and rows Confirm the total number of electrical positions and how they are distributed across rows.
Pitch Match the center-to-center spacing of contacts or terminals to the mating product and PCB.
Orientation Check straight, vertical, right-angle, top-entry or side-entry configuration as applicable.
Mounting and termination Verify surface mount or through-hole installation and the specified solder or contact termination.

Match the PCB Installation

The connector body may fit the available space while its terminals or recommended footprint remain incompatible with the board. Check the complete installation drawing.

PCB footprint Compare pad or hole locations, terminal pattern, tolerances and keep-out areas.
Installed envelope Check connector height, body width, card approach and surrounding component clearance.
Assembly process Confirm soldering method, mounting hardware, packaging and automated assembly requirements.

Confirm the Mating Component

A compatible pitch and position count do not establish a complete mating match. Use the manufacturer’s drawing or related-products list to verify the opposing connector, housing, contact or PCB interface.

✓ Mating manufacturer part number ✓ Compatible product series ✓ Contact gender and arrangement ✓ Keying and polarization ✓ Engagement and insertion depth ✓ Electrical and temperature ratings

Build a Verifiable Part Identity

Save the identifying and mating information together so that purchasing, engineering and incoming inspection use the same product definition.

Part identity record
Manufacturer + Part number | Connector type | Mating product | Positions × pitch | Mounting

If the required product is already identifiable as a complete edgeboard connector, housing, contact, adapter or accessory, browse Card Edge Connectors & Components to select the corresponding product group.

Read More
Other Card Edge ComponentsResults:
Comprehensive
Price Priority
Stock Priority
Image
Part Number
Description
Availability
Unit Price(USD)
Quantity
Operation
Wire-to-Board HDR 12-Pin 4.2mm Solder Top Entry Thru-Hole T/R
Pre-order
600,000
Factory Lead Time:15 weeks
1,200+$0.9262
- +
Ext. Price(USD):$1,111.44
MOQ:1,200
Mult:1,200
SPQ:400
Wire-to-Board Header, 20 Pos, 4.2mm Pitch, Solder, Straight Top Entry Thru-Hole, T/R
Pre-order
450,000
Factory Lead Time:15 weeks
900+$1.532
- +
Ext. Price(USD):$1,378.80
MOQ:900
Mult:900
SPQ:300
multicomp
ECAD Model:
TERMINAL BLOCK, HEADER, 4POS, TH; Gender:Header; Pitch Spacing:5mm; No. of Positions:4Ways; Rated Current:16A; Rated Voltage:300V; Block Orientation:Through Hole Vertical; Product Range:-; SVHC:No SVHC (15-Jan-2019); Con
Available Stock
531
Estimated Ship Time:6-12 working days
5+$0.6208
50+$0.596
2,500+$0.5364
5,000+$0.5364
- +
Ext. Price(USD):$24.83
MOQ:40
Mult:5
PIN HEADER, 72POS, 2ROW, 2.54MM, THT;
Available Stock
46
Estimated Ship Time:6-12 working days
1+$7.4569
10+$6.5621
500+$6.4427
1,000+$6.4427
- +
Ext. Price(USD):$29.82
MOQ:4
Mult:1
JST
ECAD Model:
RPZ Connector, Durable, ESD Shielding, Grounding Device
Pre-order
1,200
Factory Lead Time:18-22 weeks
26+
120+$3.3864
360+$3.33
600+$3.2453
- +
Ext. Price(USD):$406.36
MOQ:120
Mult:120
SPQ:120
JST
ECAD Model:
IDC Connector SKT 10 POS 2.54mm IDT RA Side Entry Cable Mount Box
Pre-order
24,000
Factory Lead Time:18-22 weeks
26+
2,400+$1.5151
7,200+$1.4898
12,000+$1.4519
- +
Ext. Price(USD):$3,636.24
MOQ:2,400
Mult:2,400
SPQ:2,400
Through-Hole Type Shrouded Header
Available Stock
944
Estimated Ship Time:6-7 working days
20+$0.4089
- +
Ext. Price(USD):$8.17
MOQ:20
Mult:20
Pre-order
220,000
Factory Lead Time:22-26 weeks
2,200+$6.0625
5,005+$5.675
10,010+$5.325
- +
Ext. Price(USD):$13,337.50
MOQ:2,200
Mult:2,200
SPQ:2,200
Wire-to-Board HDR 14-Pin 4.2mm Solder RA Side Entry Thru-Hole T/R
Pre-order
675,000
Factory Lead Time:15 weeks
1,350+$1.0115
- +
Ext. Price(USD):$1,365.52
MOQ:1,350
Mult:1,350
SPQ:450
Conn Shrouded Header (4 Sides) HDR 5 POS 2.5mm Solder ST Thru-Hole
Available Stock
4,116
Estimated Ship Time:6-7 working days
25+
20+$0.1759
500+$0.0599
- +
Ext. Price(USD):$3.51
MOQ:20
Mult:20
Available Stock
11
Estimated Ship Time:7-12 working days
1+$69.2954
10+$54.7641
25+$49.2284
- +
Ext. Price(USD):$277.18
MOQ:4
Mult:1
SPQ:1
Shrouded Header Connector, HDR, 2 Pos, 2.5mm Pitch, Solder, ST, TH, Bag/Box
Available Stock
3,440
Estimated Ship Time:5-7 working days
23+
300+$0.589
1,200+$0.5645
2,100+$0.54
- +
Ext. Price(USD):$176.70
MOQ:300
Mult:300
SPQ:300
JST
ECAD Model:
IDC Connector RCP 14 POS 2.54mm IDT RA Cable Mount
Pre-order
16,000
Factory Lead Time:18-22 weeks
26+
1,600+$2.2765
4,800+$2.2385
8,000+$2.1816
- +
Ext. Price(USD):$3,642.40
MOQ:1,600
Mult:1,600
SPQ:1,600
Wire-to-Board Header, 24 Pos, 4.2mm Pitch, Solder, ST Top Entry, Thru-Hole, T/R
Pre-order
450,000
Factory Lead Time:15 weeks
900+$8.722
- +
Ext. Price(USD):$7,849.80
MOQ:900
Mult:900
SPQ:300
Wire-to-Board Header, 20 Pos, 4.2mm Pitch, Solder, Straight Top Entry Thru-Hole, T/R
Pre-order
450,000
Factory Lead Time:15 weeks
900+$1.6086
- +
Ext. Price(USD):$1,447.74
MOQ:900
Mult:900
SPQ:300
Wire-to-Board HDR 12 POS 3mm Solder ST Top Entry Thru-Hole T/R
Pre-order
900,000
Factory Lead Time:15 weeks
1,800+$1.438
- +
Ext. Price(USD):$2,588.40
MOQ:1,800
Mult:1,800
SPQ:600
Minitek Reg Pwr 3.0 Wire To Board Connector Header Dual Row Right Angle SMT Tails And Dip Hold Down 30 Gold Plating Black Color 20 Positions Glow Wire Compatible
Pre-order
900,000
Factory Lead Time:15 weeks
1,800+$3.212
- +
Ext. Price(USD):$5,781.60
MOQ:1,800
Mult:1,800
SPQ:600
Molex
ECAD Model:
Wire-to-Board HDR Connector, 3 Power POS, 2.5mm Pitch, Solder, Right Angle, Side Entry, Thru-Hole
Pre-order
180,000
Factory Lead Time:22-26 weeks
1,800+$1.3375
4,000+$1.175
10,000+$1.15
- +
Ext. Price(USD):$2,407.50
MOQ:1,800
Mult:1,800
Wire-to-Board Connector HDR, 14-Pos, 4.2mm Pitch, Solder, Right Angle, Side Entry, Thru-Hole
Pre-order
450,000
Factory Lead Time:15 weeks
900+$4.4324
- +
Ext. Price(USD):$3,989.16
MOQ:900
Mult:900
SPQ:300
Board-to-Board Connector, PL, 80 Pos, 0.8mm Pitch, Solder, Straight, SMD
Pre-order
200,000
Factory Lead Time:6 weeks
400+$1.3423
- +
Ext. Price(USD):$1,073.84
MOQ:800
Mult:400
SPQ:400
Wire-to-Board HDR 4 POS 4.2mm Solder ST Top Entry Thru-Hole T/R
Pre-order
750,000
Factory Lead Time:15 weeks
1,500+$1.7479
- +
Ext. Price(USD):$2,621.85
MOQ:1,500
Mult:500
SPQ:500
Wire-to-Board Header 12 Pos 4.2mm Solder Straight Top Entry Thru-Hole
Pre-order
810,000
Factory Lead Time:15 weeks
1,620+$1.0358
- +
Ext. Price(USD):$1,677.99
MOQ:1,620
Mult:1,620
SPQ:540
Molex
ECAD Model:
Conn Shrouded Header (4 Sides) M 12 POS 2mm Solder ST Top Entry Thru-Hole Tube
Pre-order
504,000
Factory Lead Time:22-26 weeks
5,040+$1.275
- +
Ext. Price(USD):$6,426.00
MOQ:5,040
Mult:5,040
SPQ:5,040
Molex
ECAD Model:
Pre-order
25,200
Factory Lead Time:22-26 weeks
252+$1.2375
504+$1.1375
1,008+$1.075
2,500+$0.925
5,000+$0.8625
- +
Ext. Price(USD):$311.85
MOQ:252
Mult:252
SPQ:252
JST
ECAD Model:
Conn Board to Board PL 20 POS 0.5mm Solder RA Side Entry SMD T/R
Pre-order
120,000
Factory Lead Time:18-22 weeks
26+
12,000+$0.594
36,000+$0.5841
60,000+$0.5692
- +
Ext. Price(USD):$7,128.00
MOQ:12,000
Mult:12,000
SPQ:12,000
25 / PageGoto