Other Card Edge Components

Results:

Other card edge components include specialized or supplementary connector products that are not grouped with standard edgeboard connectors, housings, contacts, adapters or accessories. Because products in this category can use different interface and mounting formats, begin with the manufacturer part number and datasheet, identify the actual connector type, and then compare its mating and PCB requirements.

Pass the Part Identity Checkpoint

The category name alone does not define a single connector format. Use the following identification sequence before comparing products or approving a substitute.

1
Capture the Manufacturer Part Number Record the complete part number, manufacturer and product series without removing suffixes.
2
Identify the Actual Connector Type Determine whether the part is a header, socket, card-edge connector or another specialized component.
3
Confirm the Mating Interface Establish whether the product connects to a PCB card edge, another PCB, a cable assembly or a separate connector.
4
Decode the Physical Format Compare positions, rows, pitch, orientation, mounting type and termination method.
5
Verify the Datasheet Confirm the mating drawing, recommended PCB layout, ratings, materials and compatible product series.

Use the Part Number as the Primary Identifier

Product descriptions can be shortened or normalized across distributor databases. The complete manufacturer part number provides the most reliable route to the original drawing and product specification.

Manufacturer + Base Part Number + Prefix and Suffix + Series

Prefixes and suffixes may identify contact finish, packaging, mounting variation, keying or another configuration detail. Compare the complete ordering code when evaluating replacements.

Determine What the Part Connects

Establish the connection path before interpreting positions, pitch or mounting details. Products in this category may serve different interconnection functions.

PCB ↔ PCB
Board connection Confirm the interface on both boards, installed spacing and mating orientation.
PCB ↔ Cable
Wire connection Identify the mating housing, contact system, wire range and termination method.
Card ↔ Host
Card-edge interface Check card thickness, conductive-finger arrangement, insertion geometry and keying.

Decode the Connector Format

Once the product type and mating interface are known, translate the mechanical specification into a comparable set of fields.

Connector type Header, socket, receptacle, card-edge connector or another specified component.
Positions and rows Confirm the total number of electrical positions and how they are distributed across rows.
Pitch Match the center-to-center spacing of contacts or terminals to the mating product and PCB.
Orientation Check straight, vertical, right-angle, top-entry or side-entry configuration as applicable.
Mounting and termination Verify surface mount or through-hole installation and the specified solder or contact termination.

Match the PCB Installation

The connector body may fit the available space while its terminals or recommended footprint remain incompatible with the board. Check the complete installation drawing.

PCB footprint Compare pad or hole locations, terminal pattern, tolerances and keep-out areas.
Installed envelope Check connector height, body width, card approach and surrounding component clearance.
Assembly process Confirm soldering method, mounting hardware, packaging and automated assembly requirements.

Confirm the Mating Component

A compatible pitch and position count do not establish a complete mating match. Use the manufacturer’s drawing or related-products list to verify the opposing connector, housing, contact or PCB interface.

✓ Mating manufacturer part number ✓ Compatible product series ✓ Contact gender and arrangement ✓ Keying and polarization ✓ Engagement and insertion depth ✓ Electrical and temperature ratings

Build a Verifiable Part Identity

Save the identifying and mating information together so that purchasing, engineering and incoming inspection use the same product definition.

Part identity record
Manufacturer + Part number | Connector type | Mating product | Positions × pitch | Mounting

If the required product is already identifiable as a complete edgeboard connector, housing, contact, adapter or accessory, browse Card Edge Connectors & Components to select the corresponding product group.

Read More
Other Card Edge ComponentsResults:
Comprehensive
Price Priority
Stock Priority
Image
Part Number
Description
Availability
Unit Price(USD)
Quantity
Operation
Minitek Wire-to-Board Connector Header, Dual Row, Right Angle, Through Hole
Pre-order
1,200,000
Factory Lead Time:15 weeks
2,400+$1.0497
- +
Ext. Price(USD):$2,519.28
MOQ:2,400
Mult:2,400
SPQ:1,200
Wire-to-Board HDR 6 Pos 4.2mm Solder ST Top Entry TH
Pre-order
1,890,000
Factory Lead Time:15 weeks
3,780+$2.2406
- +
Ext. Price(USD):$8,469.46
MOQ:3,780
Mult:3,780
SPQ:1,260
Pre-order
81,600
Factory Lead Time:16-18 weeks
8,160+$0.2421
- +
Ext. Price(USD):$1,975.53
MOQ:8,160
Mult:8,160
Molex
ECAD Model:
Pre-order
96,000
Factory Lead Time:22-26 weeks
960+$6.725
2,000+$5.9
5,000+$5.7625
- +
Ext. Price(USD):$6,456.00
MOQ:960
Mult:960
multicomp
ECAD Model:
Conn Shrouded Header (4 Sides) HDR 10 POS 5.08mm Solder RA Side Entry Thru-Hole
Available Stock
32,965
Estimated Ship Time:6-12 working days
10+$1.1228
25+$1.0779
1,000+$0.9701
1,500+$0.9701
- +
Ext. Price(USD):$24.70
MOQ:22
Mult:1
Header SR 1.0 SM T Side Entry
Available Stock
2,279
Estimated Ship Time:14-17 working days
50+$0.6645
100+$0.5626
2,000+$0.4803
4,000+$0.478
- +
Ext. Price(USD):$50.50
MOQ:76
Mult:1
SPQ:1
JST
ECAD Model:
Conn Wire-to-Wire PL 2 POS ST Cable Mount Bag
Available Stock
3,402
Estimated Ship Time:5-9 working days
22+
5+$0.0929
15+$0.0798
30+$0.0785
- +
Ext. Price(USD):$0.46
MOQ:5
Mult:1
SPQ:500
Conn Wire to Board HDR 15 POS 2.54mm Solder RA Thru-Hole
Pre-order
50,000
Factory Lead Time:22-26 weeks
500+$2.825
1,000+$2.675
2,500+$2.4875
5,000+$2.375
10,000+$2.2875
- +
Ext. Price(USD):$1,412.50
MOQ:500
Mult:500
SPQ:500
JST
ECAD Model:
IDC Connector F 14 POS 1.5mm IDT RA Cable Mount Box
Pre-order
240,000
Factory Lead Time:18-22 weeks
26+
24,000+$0.074
72,000+$0.0727
120,000+$0.071
- +
Ext. Price(USD):$1,776.00
MOQ:24,000
Mult:24,000
SPQ:24,000
JST
ECAD Model:
Connector Board to Board RCP 6 POS 2mm Solder ST Thru-Hole Box
Pre-order
120,000
Factory Lead Time:16-18 weeks
12,000+$0.1081
- +
Ext. Price(USD):$1,297.20
MOQ:12,000
Mult:12,000
Wire-to-Board HDR, 16 POS, 4.2mm, Solder, ST Top Entry, TH, T/R
Pre-order
450,000
Factory Lead Time:15 weeks
900+$0.9558
- +
Ext. Price(USD):$860.22
MOQ:900
Mult:900
SPQ:300
Wire-to-Board Header 8 Pos 4.2mm Solder Straight Top Entry Thru-Hole T/R
Pre-order
750,000
Factory Lead Time:15 weeks
1,500+$0.4613
- +
Ext. Price(USD):$691.95
MOQ:1,500
Mult:1,500
SPQ:500
Molex
ECAD Model:
Conn Shrouded Header (4 Sides) M 34 POS 2mm Solder ST Top Entry Thru-Hole Tube
Pre-order
588,000
Factory Lead Time:22-26 weeks
5,880+$2.325
- +
Ext. Price(USD):$13,671.00
MOQ:5,880
Mult:5,880
SPQ:5,880
Molex
ECAD Model:
Conn Wire-to-Board PL 32 POS 2.54mm Solder RA Thru-Hole EXTreme PowerPlus Tray
Pre-order
140,000
Factory Lead Time:22-26 weeks
1,400+$5.425
4,000+$4.7375
10,000+$4.6375
- +
Ext. Price(USD):$7,595.00
MOQ:1,400
Mult:1,400
JST
ECAD Model:
Conn Shrouded Header HDR 34 POS 2mm Solder RA Thru-Hole Box
Available Stock
1,800
Estimated Ship Time:4-6 working days
200+$0.6582
- +
Ext. Price(USD):$131.64
MOQ:200
Mult:200
SPQ:200
Molex
ECAD Model:
MicroFit3.0 DR V Hdr Clip 15Au 10Ckt Connector Header
Pre-order
56,000
Factory Lead Time:22-26 weeks
560+$3.325
1,120+$3.1375
- +
Ext. Price(USD):$1,862.00
MOQ:560
Mult:560
SPQ:560
Wire-to-Board HDR 6 Pos 4.2mm Solder ST Top Entry TH
Pre-order
1,260,000
Factory Lead Time:15 weeks
2,520+$0.7365
- +
Ext. Price(USD):$1,855.98
MOQ:2,520
Mult:1,260
SPQ:1,260
multicomp
ECAD Model:
Shrouded Header HDR 3 POS 5.08mm RA Side Entry Thru-Hole
Available Stock
925
Estimated Ship Time:6-12 working days
50+$0.4814
150+$0.4313
2,500+$0.4159
5,000+$0.4159
- +
Ext. Price(USD):$24.07
MOQ:50
Mult:5
JST
ECAD Model:
Conn Shrouded Header (4 Sides) HDR 8 POS 2.5mm Solder ST Top Entry Thru-Hole
Pre-order
45,000
Factory Lead Time:18-22 weeks
26+
4,500+$0.5857
13,500+$0.5759
22,500+$0.5612
- +
Ext. Price(USD):$2,635.65
MOQ:4,500
Mult:4,500
SPQ:4,500
Pre-order
62,500
Factory Lead Time:22-26 weeks
625+$0.8125
- +
Ext. Price(USD):$507.81
MOQ:625
Mult:625
Wire-to-Board HDR 4 POS 4.2mm Solder ST Top Entry Thru-Hole T/R
Pre-order
750,000
Factory Lead Time:15 weeks
1,500+$0.7799
- +
Ext. Price(USD):$1,169.85
MOQ:1,500
Mult:1,500
SPQ:500
Unshrouded Header, 3 Pos, 2.5mm Pitch, Solder, ST, Thru-Hole
Available Stock
1,000
Estimated Ship Time:14-17 working days
100+$0.2411
300+$0.1836
5,000+$0.1346
10,000+$0.1334
- +
Ext. Price(USD):$50.14
MOQ:208
Mult:1
SPQ:1
Wire-to-Board Header 6 Pos 4.2mm Solder Straight Top Entry Thru-Hole T/R
Pre-order
750,000
Factory Lead Time:15 weeks
1,500+$0.7782
- +
Ext. Price(USD):$1,167.30
MOQ:1,500
Mult:1,500
SPQ:500
Wire-to-Board Header 14 Pos 4.2mm Solder Straight Top Entry Thru-Hole T/R
Pre-order
600,000
Factory Lead Time:15 weeks
1,200+$1.1194
- +
Ext. Price(USD):$1,343.28
MOQ:1,200
Mult:1,200
SPQ:400
40-Pin Module Header Connector
Pre-order
68,000
Factory Lead Time:22-26 weeks
680+$2.3
1,350+$2.0625
5,000+$1.525
10,000+$1.175
50,000+$0.975
- +
Ext. Price(USD):$1,564.00
MOQ:680
Mult:680
SPQ:680
25 / PageGoto