Other Card Edge Components

Results:

Other card edge components include specialized or supplementary connector products that are not grouped with standard edgeboard connectors, housings, contacts, adapters or accessories. Because products in this category can use different interface and mounting formats, begin with the manufacturer part number and datasheet, identify the actual connector type, and then compare its mating and PCB requirements.

Pass the Part Identity Checkpoint

The category name alone does not define a single connector format. Use the following identification sequence before comparing products or approving a substitute.

1
Capture the Manufacturer Part Number Record the complete part number, manufacturer and product series without removing suffixes.
2
Identify the Actual Connector Type Determine whether the part is a header, socket, card-edge connector or another specialized component.
3
Confirm the Mating Interface Establish whether the product connects to a PCB card edge, another PCB, a cable assembly or a separate connector.
4
Decode the Physical Format Compare positions, rows, pitch, orientation, mounting type and termination method.
5
Verify the Datasheet Confirm the mating drawing, recommended PCB layout, ratings, materials and compatible product series.

Use the Part Number as the Primary Identifier

Product descriptions can be shortened or normalized across distributor databases. The complete manufacturer part number provides the most reliable route to the original drawing and product specification.

Manufacturer + Base Part Number + Prefix and Suffix + Series

Prefixes and suffixes may identify contact finish, packaging, mounting variation, keying or another configuration detail. Compare the complete ordering code when evaluating replacements.

Determine What the Part Connects

Establish the connection path before interpreting positions, pitch or mounting details. Products in this category may serve different interconnection functions.

PCB ↔ PCB
Board connection Confirm the interface on both boards, installed spacing and mating orientation.
PCB ↔ Cable
Wire connection Identify the mating housing, contact system, wire range and termination method.
Card ↔ Host
Card-edge interface Check card thickness, conductive-finger arrangement, insertion geometry and keying.

Decode the Connector Format

Once the product type and mating interface are known, translate the mechanical specification into a comparable set of fields.

Connector type Header, socket, receptacle, card-edge connector or another specified component.
Positions and rows Confirm the total number of electrical positions and how they are distributed across rows.
Pitch Match the center-to-center spacing of contacts or terminals to the mating product and PCB.
Orientation Check straight, vertical, right-angle, top-entry or side-entry configuration as applicable.
Mounting and termination Verify surface mount or through-hole installation and the specified solder or contact termination.

Match the PCB Installation

The connector body may fit the available space while its terminals or recommended footprint remain incompatible with the board. Check the complete installation drawing.

PCB footprint Compare pad or hole locations, terminal pattern, tolerances and keep-out areas.
Installed envelope Check connector height, body width, card approach and surrounding component clearance.
Assembly process Confirm soldering method, mounting hardware, packaging and automated assembly requirements.

Confirm the Mating Component

A compatible pitch and position count do not establish a complete mating match. Use the manufacturer’s drawing or related-products list to verify the opposing connector, housing, contact or PCB interface.

✓ Mating manufacturer part number ✓ Compatible product series ✓ Contact gender and arrangement ✓ Keying and polarization ✓ Engagement and insertion depth ✓ Electrical and temperature ratings

Build a Verifiable Part Identity

Save the identifying and mating information together so that purchasing, engineering and incoming inspection use the same product definition.

Part identity record
Manufacturer + Part number | Connector type | Mating product | Positions × pitch | Mounting

If the required product is already identifiable as a complete edgeboard connector, housing, contact, adapter or accessory, browse Card Edge Connectors & Components to select the corresponding product group.

Read More
Other Card Edge ComponentsResults:
Comprehensive
Price Priority
Stock Priority
Image
Part Number
Description
Availability
Unit Price(USD)
Quantity
Operation
Wire-to-Board HDR, 8 Pos, 3mm Pitch, Solder, Top Entry, Thru-Hole, T/R
Pre-order
900,000
Factory Lead Time:15 weeks
1,800+$1.055
- +
Ext. Price(USD):$1,899.00
MOQ:1,800
Mult:1,800
SPQ:600
Board to Board Connector, 14 Pos, 0.5mm Pitch, Solder, Straight Top Entry, SMD, T/R
Pre-order
120,000
Factory Lead Time:16-18 weeks
12,000+$0.3724
- +
Ext. Price(USD):$4,468.80
MOQ:12,000
Mult:12,000
Molex
ECAD Model:
Conn Wire to Board HDR 4 POS 2.5mm Solder ST Top Entry Thru-Hole Carton
Pre-order
200,000
Factory Lead Time:25-42 weeks
2,000+$0.3947
- +
Ext. Price(USD):$789.40
MOQ:2,000
Mult:2,000
SPQ:2,000
Molex
ECAD Model:
Pre-order
116,300
Factory Lead Time:22-26 weeks
1,163+$0.0688
3,000+$0.0638
- +
Ext. Price(USD):$80.01
MOQ:1,163
Mult:1,163
SPQ:1,163
High Power DIP Header Connector
Pre-order
3,150,000
Factory Lead Time:15 weeks
6,300+$2.1692
- +
Ext. Price(USD):$13,665.96
MOQ:6,300
Mult:6,300
SPQ:2,100
Molex
ECAD Model:
Conn Shrouded Header (4 Sides) M 8 POS 2mm Solder ST Top Entry Thru-Hole Tube
Pre-order
450,000
Factory Lead Time:22-26 weeks
4,500+$1.225
- +
Ext. Price(USD):$5,512.50
MOQ:4,500
Mult:4,500
SPQ:4,500
Molex
ECAD Model:
Conn Socket Strip RCP 16 POS 2mm Solder ST SMD Milli-Grid™ Tube
Pre-order
3,300,000
Factory Lead Time:22-26 weeks
33,000+$0.7125
80,000+$0.6375
200,000+$0.625
- +
Ext. Price(USD):$23,512.50
MOQ:33,000
Mult:33,000
Molex
ECAD Model:
Conn Shrouded Header (4 Sides) HDR 52 POS 2.54mm Solder RA Thru-Hole Stac64™ Automotive Tray
Pre-order
8,400
Factory Lead Time:22-26 weeks
84+$6.3375
336+$6.2125
500+$5.175
1,000+$4.4875
2,500+$4.2
- +
Ext. Price(USD):$532.35
MOQ:84
Mult:84
SPQ:84
Headers and PCB Connector
Pre-order
5,000
Factory Lead Time:10-16 weeks
24+
500+$0.7789
750+$0.7587
- +
Ext. Price(USD):$389.45
MOQ:500
Mult:250
SPQ:250
Molex
ECAD Model:
Conn Shrouded Header (4 Sides) HDR 46 POS 2mm Solder RA Thru-Hole Milli-Grid™ Tube
Pre-order
27,500
Factory Lead Time:22-26 weeks
275+$1.425
1,100+$1.35
- +
Ext. Price(USD):$391.87
MOQ:275
Mult:275
SPQ:275
Wire-to-Board HDR, 10 POS, 4.2mm Pitch, Solder, ST Top Entry, Thru-Hole, T/R
Pre-order
600,000
Factory Lead Time:15 weeks
1,200+$0.9923
- +
Ext. Price(USD):$1,190.76
MOQ:1,200
Mult:400
SPQ:400
PIN HDR 80/52 POS ASSY
Pre-order
2,000
Factory Lead Time:22-26 weeks
20+$25.375
40+$21.35
80+$17.9375
- +
Ext. Price(USD):$507.50
MOQ:20
Mult:20
SPQ:20
Molex
ECAD Model:
2.00mm Pitch Milli Grid PCB Header Dual Row Vertical TH 2.00μm Tin Plating with Peg 3.60mm Tail 40 Circuits Glow Wire Tube
Pre-order
432,000
Factory Lead Time:22-26 weeks
4,320+$1.55
- +
Ext. Price(USD):$6,696.00
MOQ:4,320
Mult:4,320
SPQ:4,320
Wire-to-Board HDR, 8 Pos, 3mm Pitch, Solder, Top Entry, Thru-Hole, T/R
Pre-order
900,000
Factory Lead Time:15 weeks
1,800+$1.1212
- +
Ext. Price(USD):$2,018.16
MOQ:1,800
Mult:1,800
SPQ:600
Wire-to-Board Header 8 Pos 4.2mm Solder Straight Top Entry Thru-Hole T/R
Pre-order
750,000
Factory Lead Time:15 weeks
1,500+$0.4613
- +
Ext. Price(USD):$691.95
MOQ:1,500
Mult:1,500
SPQ:500
Wire-to-Board Header 4 POS 4.2mm Solder Right Angle Side Entry TH
Pre-order
1,800,000
Factory Lead Time:15 weeks
3,600+$1.3684
- +
Ext. Price(USD):$4,926.24
MOQ:3,600
Mult:3,600
SPQ:1,200
Unshrouded Header, 4 Pos, 2.5mm Pitch, Solder, ST, Thru-Hole
Available Stock
990
Estimated Ship Time:6-7 working days
21+
20+$0.2758
- +
Ext. Price(USD):$5.51
MOQ:20
Mult:20
Wire-to-Board Header 4 POS 4.2mm Solder Right Angle Side Entry TH
Pre-order
1,800,000
Factory Lead Time:15 weeks
3,600+$0.4544
- +
Ext. Price(USD):$1,635.84
MOQ:3,600
Mult:3,600
SPQ:1,200
Wire-to-Board HDR, 22 POS, 3mm, Solder, ST Top Entry, Thru-Hole, T/R
Pre-order
675,000
Factory Lead Time:15 weeks
1,350+$2.5644
- +
Ext. Price(USD):$3,461.94
MOQ:1,350
Mult:1,350
SPQ:450
Wire-to-Board HDR 2 Pos 4.2mm Solder RA Side Entry TH T/R
Pre-order
1,200,000
Factory Lead Time:15 weeks
2,400+$0.8965
- +
Ext. Price(USD):$2,151.60
MOQ:2,400
Mult:2,400
SPQ:1,200
Multiple Configuration PCB Headers and Receptacles CONN MODU 1P
Pre-order
1,000,000
Factory Lead Time:22-26 weeks
10,000+$0.1063
- +
Ext. Price(USD):$1,063.00
MOQ:10,000
Mult:10,000
SPQ:10,000
Molex
ECAD Model:
Conn Unshrouded Header HDR 14 POS 2.54mm Solder ST Thru-Hole C-Grid III Tray
Pre-order
120,000
Factory Lead Time:22-26 weeks
1,200+$1.375
2,400+$1.3
- +
Ext. Price(USD):$1,650.00
MOQ:1,200
Mult:1,200
SPQ:1,200
Conn Board to Board RCP 67 POS 0.5mm Solder RA Side Entry SMD T/R
Pre-order
3,000,000
Factory Lead Time:12 weeks
6,000+$1.3858
- +
Ext. Price(USD):$8,314.80
MOQ:6,000
Mult:6,000
SPQ:6,000
Wire-to-Board HDR 22 Pos 4.2mm Solder RA Side Entry TH
Pre-order
270,000
Factory Lead Time:15 weeks
540+$8.0465
- +
Ext. Price(USD):$4,345.11
MOQ:540
Mult:540
SPQ:180
Wire-to-Board Connector HDR 22 Pos 4.2mm Solder Straight Top Entry TH Tray
Pre-order
472,500
Factory Lead Time:15 weeks
945+$9.5769
- +
Ext. Price(USD):$9,050.17
MOQ:945
Mult:945
SPQ:315
25 / PageGoto