Other Card Edge Components

Results:

Other card edge components include specialized or supplementary connector products that are not grouped with standard edgeboard connectors, housings, contacts, adapters or accessories. Because products in this category can use different interface and mounting formats, begin with the manufacturer part number and datasheet, identify the actual connector type, and then compare its mating and PCB requirements.

Pass the Part Identity Checkpoint

The category name alone does not define a single connector format. Use the following identification sequence before comparing products or approving a substitute.

1
Capture the Manufacturer Part Number Record the complete part number, manufacturer and product series without removing suffixes.
2
Identify the Actual Connector Type Determine whether the part is a header, socket, card-edge connector or another specialized component.
3
Confirm the Mating Interface Establish whether the product connects to a PCB card edge, another PCB, a cable assembly or a separate connector.
4
Decode the Physical Format Compare positions, rows, pitch, orientation, mounting type and termination method.
5
Verify the Datasheet Confirm the mating drawing, recommended PCB layout, ratings, materials and compatible product series.

Use the Part Number as the Primary Identifier

Product descriptions can be shortened or normalized across distributor databases. The complete manufacturer part number provides the most reliable route to the original drawing and product specification.

Manufacturer + Base Part Number + Prefix and Suffix + Series

Prefixes and suffixes may identify contact finish, packaging, mounting variation, keying or another configuration detail. Compare the complete ordering code when evaluating replacements.

Determine What the Part Connects

Establish the connection path before interpreting positions, pitch or mounting details. Products in this category may serve different interconnection functions.

PCB ↔ PCB
Board connection Confirm the interface on both boards, installed spacing and mating orientation.
PCB ↔ Cable
Wire connection Identify the mating housing, contact system, wire range and termination method.
Card ↔ Host
Card-edge interface Check card thickness, conductive-finger arrangement, insertion geometry and keying.

Decode the Connector Format

Once the product type and mating interface are known, translate the mechanical specification into a comparable set of fields.

Connector type Header, socket, receptacle, card-edge connector or another specified component.
Positions and rows Confirm the total number of electrical positions and how they are distributed across rows.
Pitch Match the center-to-center spacing of contacts or terminals to the mating product and PCB.
Orientation Check straight, vertical, right-angle, top-entry or side-entry configuration as applicable.
Mounting and termination Verify surface mount or through-hole installation and the specified solder or contact termination.

Match the PCB Installation

The connector body may fit the available space while its terminals or recommended footprint remain incompatible with the board. Check the complete installation drawing.

PCB footprint Compare pad or hole locations, terminal pattern, tolerances and keep-out areas.
Installed envelope Check connector height, body width, card approach and surrounding component clearance.
Assembly process Confirm soldering method, mounting hardware, packaging and automated assembly requirements.

Confirm the Mating Component

A compatible pitch and position count do not establish a complete mating match. Use the manufacturer’s drawing or related-products list to verify the opposing connector, housing, contact or PCB interface.

✓ Mating manufacturer part number ✓ Compatible product series ✓ Contact gender and arrangement ✓ Keying and polarization ✓ Engagement and insertion depth ✓ Electrical and temperature ratings

Build a Verifiable Part Identity

Save the identifying and mating information together so that purchasing, engineering and incoming inspection use the same product definition.

Part identity record
Manufacturer + Part number | Connector type | Mating product | Positions × pitch | Mounting

If the required product is already identifiable as a complete edgeboard connector, housing, contact, adapter or accessory, browse Card Edge Connectors & Components to select the corresponding product group.

Read More
Other Card Edge ComponentsResults:
Comprehensive
Price Priority
Stock Priority
Image
Part Number
Description
Availability
Unit Price(USD)
Quantity
Operation
Pre-order
34,000
Factory Lead Time:22-26 weeks
340+$6.65
680+$6.3
1,020+$4.65
5,032+$4.3625
10,030+$4.15
- +
Ext. Price(USD):$2,261.00
MOQ:340
Mult:340
SPQ:340
Wire-to-Board Header, 24 Pos, 4.2mm Pitch, Solder, ST Top Entry, Thru-Hole, T/R
Pre-order
450,000
Factory Lead Time:15 weeks
900+$1.7619
- +
Ext. Price(USD):$1,585.71
MOQ:900
Mult:900
SPQ:300
Molex
ECAD Model:
PCB Header, 2.00mm Pitch, Dual Row, Vertical TH, 0.75μm Gold Plated, No Peg, 2.60mm Tail, 50 Circuits, Glow Wire Capable, Tube
Pre-order
450,000
Factory Lead Time:22-26 weeks
4,500+$4.7
- +
Ext. Price(USD):$21,150.00
MOQ:4,500
Mult:4,500
SPQ:4,500
Wire-to-Board Header, 24 Pos, 4.2mm Pitch, Solder, ST Top Entry, Thru-Hole, T/R
Pre-order
450,000
Factory Lead Time:15 weeks
900+$8.8091
- +
Ext. Price(USD):$7,928.19
MOQ:900
Mult:900
SPQ:300
Wire-to-Board HDR 10 Pos 3mm Solder ST Top Entry TH T/R
Pre-order
900,000
Factory Lead Time:15 weeks
1,800+$0.6703
- +
Ext. Price(USD):$1,206.54
MOQ:1,800
Mult:1,800
SPQ:600
Wire-to-Board Header 6 Pos 4.2mm Solder Straight Top Entry Thru-Hole T/R
Pre-order
750,000
Factory Lead Time:15 weeks
1,500+$0.6633
- +
Ext. Price(USD):$994.95
MOQ:1,500
Mult:1,500
SPQ:500
Wire-to-Board Header 6 Pos 4.2mm Solder Straight Top Entry Thru-Hole T/R
Pre-order
750,000
Factory Lead Time:15 weeks
1,500+$0.7556
- +
Ext. Price(USD):$1,133.40
MOQ:1,500
Mult:1,500
SPQ:500
Wire-to-Board HDR 12-Pin 4.2mm Solder Top Entry Thru-Hole T/R
Pre-order
600,000
Factory Lead Time:15 weeks
1,200+$4.8485
- +
Ext. Price(USD):$5,818.20
MOQ:1,200
Mult:1,200
SPQ:400
BTB Header Shrouded SMD 1.27mm × 1.27mm
Pre-order
700,000
Factory Lead Time:12 weeks
1,400+$3.2225
- +
Ext. Price(USD):$4,511.50
MOQ:1,400
Mult:1,400
SPQ:1,400
Conn Board to Board PL 30 POS 0.5mm Solder ST Top Entry SMD T/R
Pre-order
160,000
Factory Lead Time:16-18 weeks
16,000+$0.5275
- +
Ext. Price(USD):$8,440.00
MOQ:16,000
Mult:16,000
Wire-to-Board HDR, 24 Pos, 3mm Pitch, Solder, ST Top Entry, Thru-Hole, T/R
Pre-order
675,000
Factory Lead Time:15 weeks
1,350+$2.7664
- +
Ext. Price(USD):$3,734.64
MOQ:1,350
Mult:1,350
SPQ:450
Wire-to-Board Connector HDR 10 Pos 4.2mm Solder Top Entry Thru-Hole
Pre-order
945,000
Factory Lead Time:15 weeks
1,890+$3.5567
- +
Ext. Price(USD):$6,722.16
MOQ:1,890
Mult:1,890
SPQ:630
Molex
ECAD Model:
Conn Wire to Board RCP 7 POS 1.5mm Solder ST Thru-Hole
Pre-order
1,188,000
Factory Lead Time:22-26 weeks
11,880+$0.3325
30,000+$0.2913
75,000+$0.285
- +
Ext. Price(USD):$3,950.10
MOQ:11,880
Mult:11,880
Wire-to-Board HDR, 14 Pos, 4.2mm Pitch, Solder, ST Top Entry, Thru-Hole, Tray
Pre-order
742,500
Factory Lead Time:15 weeks
1,485+$6.2065
- +
Ext. Price(USD):$9,216.65
MOQ:1,485
Mult:1,485
SPQ:495
JST
ECAD Model:
Conn Board to Board PL 60 POS 0.5mm Solder ST Top Entry SMD
Pre-order
150,000
Factory Lead Time:16-18 weeks
15,000+$1.4305
- +
Ext. Price(USD):$21,457.50
MOQ:15,000
Mult:15,000
Molex
ECAD Model:
Pre-order
1,500,000
Factory Lead Time:22-26 weeks
15,000+$0.0938
30,000+$0.0888
- +
Ext. Price(USD):$1,407.00
MOQ:15,000
Mult:15,000
SPQ:15,000
Wire-to-Board HDR, 2 Pos, 3mm Pitch, Solder, ST Top Entry, TH, T/R
Pre-order
1,350,000
Factory Lead Time:15 weeks
2,700+$0.6389
- +
Ext. Price(USD):$1,725.03
MOQ:2,700
Mult:2,700
SPQ:900
Wire-to-Board Header 8 Pos 4.2mm Solder Straight Top Entry Thru-Hole T/R
Pre-order
750,000
Factory Lead Time:15 weeks
1,500+$0.6319
- +
Ext. Price(USD):$947.85
MOQ:1,500
Mult:1,500
SPQ:500
Wire-to-Board HDR 16-Pin 4.2mm Solder RA Side Entry TH
Pre-order
405,000
Factory Lead Time:15 weeks
810+$5.0852
- +
Ext. Price(USD):$4,119.01
MOQ:810
Mult:810
SPQ:270
Minitek Wire-to-Board Connector Header, Dual Row, Right Angle, Through Hole
Pre-order
450,000
Factory Lead Time:15 weeks
900+$1.8088
- +
Ext. Price(USD):$1,627.92
MOQ:900
Mult:900
SPQ:450
Wire to Board HDR 18 POS 2.54mm Solder RA Thru-Hole
Pre-order
50,000
Factory Lead Time:22-26 weeks
500+$3.225
1,000+$3.05
2,500+$2.825
5,000+$2.6875
10,000+$2.6125
- +
Ext. Price(USD):$1,612.50
MOQ:500
Mult:500
SPQ:500
JST
ECAD Model:
Conn Shrouded Header (3 Sides) HDR 15 POS 2.5mm Solder ST Top Entry Thru-Hole Box
Available Stock
9,750
Estimated Ship Time:4-6 working days
250+$0.1526
- +
Ext. Price(USD):$38.15
MOQ:250
Mult:250
SPQ:250
Conn Wire to Board HDR 2 POS 3.96mm Solder RA Thru-Hole Box
Available Stock
732
Estimated Ship Time:6-7 working days
20+$0.2759
- +
Ext. Price(USD):$5.51
MOQ:20
Mult:20
Wire-to-Board HDR, 24 Pos, 3mm Pitch, Solder, ST Top Entry, Thru-Hole, T/R
Pre-order
675,000
Factory Lead Time:15 weeks
1,350+$2.7664
- +
Ext. Price(USD):$3,734.64
MOQ:1,350
Mult:1,350
SPQ:450
Molex
ECAD Model:
Conn Shrouded Header (4 Sides) HDR 6 POS 2.5mm Solder ST Thru-Hole Bag
Available Stock
20
Estimated Ship Time:3-5 working days
06+
10+$0.2702
50+$0.2655
100+$0.2561
- +
Ext. Price(USD):$2.70
MOQ:10
Mult:10
SPQ:10
25 / PageGoto