Other Card Edge Components

Results:

Other card edge components include specialized or supplementary connector products that are not grouped with standard edgeboard connectors, housings, contacts, adapters or accessories. Because products in this category can use different interface and mounting formats, begin with the manufacturer part number and datasheet, identify the actual connector type, and then compare its mating and PCB requirements.

Pass the Part Identity Checkpoint

The category name alone does not define a single connector format. Use the following identification sequence before comparing products or approving a substitute.

1
Capture the Manufacturer Part Number Record the complete part number, manufacturer and product series without removing suffixes.
2
Identify the Actual Connector Type Determine whether the part is a header, socket, card-edge connector or another specialized component.
3
Confirm the Mating Interface Establish whether the product connects to a PCB card edge, another PCB, a cable assembly or a separate connector.
4
Decode the Physical Format Compare positions, rows, pitch, orientation, mounting type and termination method.
5
Verify the Datasheet Confirm the mating drawing, recommended PCB layout, ratings, materials and compatible product series.

Use the Part Number as the Primary Identifier

Product descriptions can be shortened or normalized across distributor databases. The complete manufacturer part number provides the most reliable route to the original drawing and product specification.

Manufacturer + Base Part Number + Prefix and Suffix + Series

Prefixes and suffixes may identify contact finish, packaging, mounting variation, keying or another configuration detail. Compare the complete ordering code when evaluating replacements.

Determine What the Part Connects

Establish the connection path before interpreting positions, pitch or mounting details. Products in this category may serve different interconnection functions.

PCB ↔ PCB
Board connection Confirm the interface on both boards, installed spacing and mating orientation.
PCB ↔ Cable
Wire connection Identify the mating housing, contact system, wire range and termination method.
Card ↔ Host
Card-edge interface Check card thickness, conductive-finger arrangement, insertion geometry and keying.

Decode the Connector Format

Once the product type and mating interface are known, translate the mechanical specification into a comparable set of fields.

Connector type Header, socket, receptacle, card-edge connector or another specified component.
Positions and rows Confirm the total number of electrical positions and how they are distributed across rows.
Pitch Match the center-to-center spacing of contacts or terminals to the mating product and PCB.
Orientation Check straight, vertical, right-angle, top-entry or side-entry configuration as applicable.
Mounting and termination Verify surface mount or through-hole installation and the specified solder or contact termination.

Match the PCB Installation

The connector body may fit the available space while its terminals or recommended footprint remain incompatible with the board. Check the complete installation drawing.

PCB footprint Compare pad or hole locations, terminal pattern, tolerances and keep-out areas.
Installed envelope Check connector height, body width, card approach and surrounding component clearance.
Assembly process Confirm soldering method, mounting hardware, packaging and automated assembly requirements.

Confirm the Mating Component

A compatible pitch and position count do not establish a complete mating match. Use the manufacturer’s drawing or related-products list to verify the opposing connector, housing, contact or PCB interface.

✓ Mating manufacturer part number ✓ Compatible product series ✓ Contact gender and arrangement ✓ Keying and polarization ✓ Engagement and insertion depth ✓ Electrical and temperature ratings

Build a Verifiable Part Identity

Save the identifying and mating information together so that purchasing, engineering and incoming inspection use the same product definition.

Part identity record
Manufacturer + Part number | Connector type | Mating product | Positions × pitch | Mounting

If the required product is already identifiable as a complete edgeboard connector, housing, contact, adapter or accessory, browse Card Edge Connectors & Components to select the corresponding product group.

Read More
Other Card Edge ComponentsResults:
Comprehensive
Price Priority
Stock Priority
Image
Part Number
Description
Availability
Unit Price(USD)
Quantity
Operation
Molex
ECAD Model:
Wire-to-Board Connector Plug 20 POS 2.54mm Solder RA Thru-Hole EXTreme PowerPlus Tray
Pre-order
108,000
Factory Lead Time:22-26 weeks
1,080+$3.3875
4,000+$2.9625
10,000+$2.9
- +
Ext. Price(USD):$3,658.50
MOQ:1,080
Mult:1,080
Minitek Reg Pwr 3.0 Wire-to-Board Connector, Single Row Vertical Header, TH
Pre-order
810,000
Factory Lead Time:15 weeks
1,620+$2.0752
- +
Ext. Price(USD):$3,361.82
MOQ:1,620
Mult:1,620
SPQ:1,620
Board to Board Connector Receptacle 8 Pos 2.5mm Solder Right Angle Thru-Hole Box
Pre-order
700,000
Factory Lead Time:22-26 weeks
7,000+$1.3875
10,000+$1.1875
25,000+$1.0375
50,000+$0.9
100,000+$0.825
- +
Ext. Price(USD):$9,712.50
MOQ:7,000
Mult:7,000
SPQ:7,000
Wire-to-Board HDR 22 Pos 4.2mm Solder ST Top Entry TH
Pre-order
360,000
Factory Lead Time:15 weeks
720+$1.5581
- +
Ext. Price(USD):$1,121.83
MOQ:720
Mult:720
SPQ:360
Molex
ECAD Model:
Conn Wire to Board HDR 13POS 3.96mm Solder ST Thru-Hole KK
Pre-order
22,500
Factory Lead Time:22-26 weeks
225+$1.2375
450+$1.2
900+$1.1375
1,000+$0.95
2,500+$0.8375
- +
Ext. Price(USD):$278.43
MOQ:225
Mult:225
SPQ:225
Molex
ECAD Model:
Pre-order
120,000
Factory Lead Time:22-26 weeks
1,200+$1.3625
4,000+$1.1875
10,000+$1.1625
- +
Ext. Price(USD):$1,635.00
MOQ:1,200
Mult:1,200
Shrouded Header
Pre-order
48,000
Factory Lead Time:22-26 weeks
480+$4.575
960+$4.3375
1,008+$3.5375
5,008+$3.3
10,000+$3.1125
- +
Ext. Price(USD):$2,196.00
MOQ:480
Mult:480
SPQ:480
Pre-order
114,000
Factory Lead Time:22-26 weeks
1,140+$5
5,320+$4.6625
10,260+$4.3875
- +
Ext. Price(USD):$5,700.00
MOQ:1,140
Mult:1,140
SPQ:1,140
JST
ECAD Model:
Conn Shrouded Header (3 Sides) HDR 9 POS 2.5mm Solder ST Top Entry Thru-Hole Box
Pre-order
120,000
Factory Lead Time:18-22 weeks
26+
12,000+$0.0583
36,000+$0.0573
60,000+$0.0558
- +
Ext. Price(USD):$699.60
MOQ:12,000
Mult:12,000
SPQ:12,000
Pre-order
250,000
Factory Lead Time:22-26 weeks
2,500+$1.825
5,000+$1.6
500,000+$0.8625
1,000,000+$0.825
- +
Ext. Price(USD):$4,562.50
MOQ:2,500
Mult:2,500
Conn Wire to Board HDR 7 POS 2mm Solder RA Thru-Hole Bag/Box
Pre-order
500,000
Factory Lead Time:22-26 weeks
5,000+$0.3013
10,000+$0.2688
25,000+$0.2225
50,000+$0.215
100,000+$0.2063
- +
Ext. Price(USD):$1,506.50
MOQ:5,000
Mult:5,000
SPQ:5,000
Conn Shrouded Header HDR 5 POS 2.5mm Solder ST Thru-Hole Box
Available Stock
3,605
Estimated Ship Time:5-9 working days
22+
10+$0.2679
50+$0.2099
150+$0.2064
- +
Ext. Price(USD):$2.67
MOQ:10
Mult:5
SPQ:300
JST
ECAD Model:
JST Wire-to-Board Connector LC Series 5.08mm Pitch 4-Pin Header Top Entry
Available Stock
1,619
Estimated Ship Time:6-7 working days
26+
20+$0.4313
100+$0.1604
- +
Ext. Price(USD):$8.62
MOQ:20
Mult:20
Shrouded Header HDR Vertical THT
Available Stock
5,388
Estimated Ship Time:6-7 working days
24+
20+$0.6382
245+$0.2381
- +
Ext. Price(USD):$12.76
MOQ:20
Mult:20
Molex
ECAD Model:
Conn Board to Board RCP 24 POS 0.4mm Solder ST SMD T/R
Available Stock
42
Estimated Ship Time:3-5 working days
15+
1+$2.8596
30+$2.7841
50+$2.6864
- +
Ext. Price(USD):$2.85
MOQ:1
Mult:1
SPQ:1
IDC Connector Receptacle, 14 Pos, 3.96mm, IDT, Right Angle, Cable Mount
Pre-order
12,500
Factory Lead Time:22-26 weeks
125+$1.4
500+$1.325
1,000+$1.1625
25,000+$1.0375
50,000+$0.9
- +
Ext. Price(USD):$175.00
MOQ:125
Mult:125
SPQ:125
JST
ECAD Model:
Conn Unshrouded Header HDR 20 POS 2.5mm Solder RA Thru-Hole
Available Stock
250
Estimated Ship Time:14-17 working days
1+$1.3974
50+$1.0275
2,000+$0.7096
4,000+$0.7074
- +
Ext. Price(USD):$50.30
MOQ:36
Mult:1
SPQ:1
Wire-to-Board HDR 22 Pos 4.2mm Solder RA Side Entry TH T/R
Pre-order
675,000
Factory Lead Time:15 weeks
1,350+$1.6312
- +
Ext. Price(USD):$2,202.12
MOQ:1,350
Mult:450
SPQ:450
Conn Socket Strip SKT 50 POS 1.27mm Solder ST Top Entry Thru-Hole
Available Stock
875
Estimated Ship Time:6-12 working days
10+$2.716
25+$2.4335
50+$2.4335
100+$2.4335
- +
Ext. Price(USD):$27.16
MOQ:10
Mult:5
Wire-to-Board HDR 4 Pos 5.08mm Solder RA Thru-Hole
Available Stock
240
Estimated Ship Time:14-17 working days
10+$2.6057
30+$2.0331
500+$1.5058
1,000+$1.4988
- +
Ext. Price(USD):$52.11
MOQ:20
Mult:1
SPQ:1
Header Top Entry Type 6 Contact
Available Stock
80
Estimated Ship Time:14-17 working days
10+$3.1154
50+$2.3571
2,000+$1.8747
4,000+$1.8679
- +
Ext. Price(USD):$52.96
MOQ:17
Mult:1
SPQ:1
Minitek Reg Pwr 3.0 Wire-to-Board Connector, Single Row Right Angle Header, TH
Pre-order
1,600,000
Factory Lead Time:15 weeks
3,200+$0.7973
- +
Ext. Price(USD):$2,551.36
MOQ:3,200
Mult:3,200
SPQ:1,600
Conn Unshrouded Header HDR 9 POS 2.54mm Solder ST Thru-Hole Carton
Pre-order
25,000
Factory Lead Time:22-26 weeks
250+$1.8875
1,000+$1.7875
5,000+$1.3125
10,000+$1.025
50,000+$0.85
- +
Ext. Price(USD):$471.87
MOQ:250
Mult:250
SPQ:250
CONNECTOR, HEADER, 24POS, 2.54MM; Pitch Spacing:2.54mm; No. of Contacts:24Contacts; Gender:Header; Product Range:-; Contact Termination Type:Surface Mount; No. of Rows:2Rows; Contact Plating:Gold Plated Contacts; Contact
Available Stock
1,717
Estimated Ship Time:6-12 working days
1+$0.8876
50+$0.852
100+$0.7952
200+$0.7952
- +
Ext. Price(USD):$24.85
MOQ:28
Mult:1
Pre-order
234,000
Factory Lead Time:22-26 weeks
2,340+$3.45
5,005+$3.225
10,010+$3.025
- +
Ext. Price(USD):$8,073.00
MOQ:2,340
Mult:2,340
SPQ:2,340
25 / PageGoto