Other Card Edge Components

Results:

Other card edge components include specialized or supplementary connector products that are not grouped with standard edgeboard connectors, housings, contacts, adapters or accessories. Because products in this category can use different interface and mounting formats, begin with the manufacturer part number and datasheet, identify the actual connector type, and then compare its mating and PCB requirements.

Pass the Part Identity Checkpoint

The category name alone does not define a single connector format. Use the following identification sequence before comparing products or approving a substitute.

1
Capture the Manufacturer Part Number Record the complete part number, manufacturer and product series without removing suffixes.
2
Identify the Actual Connector Type Determine whether the part is a header, socket, card-edge connector or another specialized component.
3
Confirm the Mating Interface Establish whether the product connects to a PCB card edge, another PCB, a cable assembly or a separate connector.
4
Decode the Physical Format Compare positions, rows, pitch, orientation, mounting type and termination method.
5
Verify the Datasheet Confirm the mating drawing, recommended PCB layout, ratings, materials and compatible product series.

Use the Part Number as the Primary Identifier

Product descriptions can be shortened or normalized across distributor databases. The complete manufacturer part number provides the most reliable route to the original drawing and product specification.

Manufacturer + Base Part Number + Prefix and Suffix + Series

Prefixes and suffixes may identify contact finish, packaging, mounting variation, keying or another configuration detail. Compare the complete ordering code when evaluating replacements.

Determine What the Part Connects

Establish the connection path before interpreting positions, pitch or mounting details. Products in this category may serve different interconnection functions.

PCB ↔ PCB
Board connection Confirm the interface on both boards, installed spacing and mating orientation.
PCB ↔ Cable
Wire connection Identify the mating housing, contact system, wire range and termination method.
Card ↔ Host
Card-edge interface Check card thickness, conductive-finger arrangement, insertion geometry and keying.

Decode the Connector Format

Once the product type and mating interface are known, translate the mechanical specification into a comparable set of fields.

Connector type Header, socket, receptacle, card-edge connector or another specified component.
Positions and rows Confirm the total number of electrical positions and how they are distributed across rows.
Pitch Match the center-to-center spacing of contacts or terminals to the mating product and PCB.
Orientation Check straight, vertical, right-angle, top-entry or side-entry configuration as applicable.
Mounting and termination Verify surface mount or through-hole installation and the specified solder or contact termination.

Match the PCB Installation

The connector body may fit the available space while its terminals or recommended footprint remain incompatible with the board. Check the complete installation drawing.

PCB footprint Compare pad or hole locations, terminal pattern, tolerances and keep-out areas.
Installed envelope Check connector height, body width, card approach and surrounding component clearance.
Assembly process Confirm soldering method, mounting hardware, packaging and automated assembly requirements.

Confirm the Mating Component

A compatible pitch and position count do not establish a complete mating match. Use the manufacturer’s drawing or related-products list to verify the opposing connector, housing, contact or PCB interface.

✓ Mating manufacturer part number ✓ Compatible product series ✓ Contact gender and arrangement ✓ Keying and polarization ✓ Engagement and insertion depth ✓ Electrical and temperature ratings

Build a Verifiable Part Identity

Save the identifying and mating information together so that purchasing, engineering and incoming inspection use the same product definition.

Part identity record
Manufacturer + Part number | Connector type | Mating product | Positions × pitch | Mounting

If the required product is already identifiable as a complete edgeboard connector, housing, contact, adapter or accessory, browse Card Edge Connectors & Components to select the corresponding product group.

Read More
Other Card Edge ComponentsResults:
Comprehensive
Price Priority
Stock Priority
Image
Part Number
Description
Availability
Unit Price(USD)
Quantity
Operation
Molex
ECAD Model:
Conn Socket Strip RCP 11 POS 2.54mm Solder ST Bottom Entry Thru-Hole KK Tray
Pre-order
44,600
Factory Lead Time:22-26 weeks
446+$1.1
1,782+$1.05
- +
Ext. Price(USD):$490.60
MOQ:446
Mult:446
SPQ:446
Wire-to-Board HDR, 2 Pos, 4.2mm Pitch, Solder, ST Top Entry, TH
Pre-order
4,725,000
Factory Lead Time:15 weeks
9,450+$1.5425
- +
Ext. Price(USD):$14,576.62
MOQ:9,450
Mult:9,450
SPQ:3,150
Wire-to-Board Header 16 Pos 3mm Solder Straight Top Entry Thru-Hole T/R
Pre-order
675,000
Factory Lead Time:15 weeks
1,350+$1.9063
- +
Ext. Price(USD):$2,573.50
MOQ:1,350
Mult:1,350
SPQ:450
Datamate 2-Row Mix-Tek Male Vertical PC Tail Connector, Jackscrews/5mm Board Mount, 2x4.5mm Signal Contacts, 2x5mm Power Contacts
Available Stock
5
Estimated Ship Time:7-12 working days
1+$52.5894
10+$51.1066
25+$50.0192
- +
Ext. Price(USD):$262.94
MOQ:5
Mult:1
SPQ:1
Conn Wire to Board HDR 11 POS 1mm Solder RA SMD T/R
Pre-order
1,050,000
Factory Lead Time:22-26 weeks
10,500+$1.525
25,500+$1.3125
51,000+$1.1625
100,500+$1.0625
250,500+$1.0125
- +
Ext. Price(USD):$16,012.50
MOQ:10,500
Mult:10,500
SPQ:10,500
Wire-to-Board HDR 12-Pin 4.2mm Solder Top Entry Thru-Hole T/R
Pre-order
400,000
Factory Lead Time:15 weeks
800+$1.0202
- +
Ext. Price(USD):$816.16
MOQ:800
Mult:400
SPQ:400
2.54mm SMT Dual Socket Bottom Entry
Available Stock
367
Estimated Ship Time:6-12 working days
1+$3.276
25+$3.0576
75+$3.003
200+$2.9484
500+$2.9484
- +
Ext. Price(USD):$26.20
MOQ:8
Mult:1
Wire-to-Board HDR, 10 POS, 4.2mm Pitch, Solder, ST Top Entry, Thru-Hole, T/R
Pre-order
400,000
Factory Lead Time:15 weeks
800+$0.9471
- +
Ext. Price(USD):$757.68
MOQ:800
Mult:800
SPQ:400
Wire-to-Board Header, 20 Pos, 4.2mm Pitch, Solder, Straight Top Entry Thru-Hole, T/R
Pre-order
450,000
Factory Lead Time:15 weeks
900+$1.6017
- +
Ext. Price(USD):$1,441.53
MOQ:900
Mult:900
SPQ:300
Conn Socket Strip SKT 24 POS 2mm Solder RA Thru-Hole Box/Tube
Pre-order
360,000
Factory Lead Time:22-26 weeks
3,600+$4.05
5,016+$3.25
10,008+$2.8375
25,008+$2.6
50,016+$2.4375
- +
Ext. Price(USD):$14,580.00
MOQ:3,600
Mult:3,600
SPQ:3,600
Wire-to-Board HDR, 2 Pos, 3mm Pitch, Solder, ST Top Entry, TH, T/R
Pre-order
1,350,000
Factory Lead Time:15 weeks
2,700+$0.484
- +
Ext. Price(USD):$1,306.80
MOQ:2,700
Mult:2,700
SPQ:900
Pre-order
109,200
Factory Lead Time:22-26 weeks
1,092+$10.525
5,096+$9.875
10,010+$9.375
- +
Ext. Price(USD):$11,493.30
MOQ:1,092
Mult:1,092
SPQ:1,092
Shrouded Header (4 Sides) M 20 Pos 5.08mm Solder ST Top Entry Thru-Hole
Pre-order
10,000
Factory Lead Time:22-26 weeks
100+$10.0125
200+$8.9625
500+$6.6875
1,000+$5.0875
5,000+$4.3375
- +
Ext. Price(USD):$1,001.25
MOQ:100
Mult:100
SPQ:100
Molex
ECAD Model:
Pre-order
150,000
Factory Lead Time:22-26 weeks
1,500+$0.335
6,000+$0.3175
- +
Ext. Price(USD):$502.50
MOQ:1,500
Mult:1,500
SPQ:1,500
Wire-to-Board HDR 10-Pin 4.2mm Pitch Solder RA Side Entry TH T/R
Pre-order
675,000
Factory Lead Time:15 weeks
1,350+$0.7556
- +
Ext. Price(USD):$1,020.06
MOQ:1,350
Mult:1,350
SPQ:450
High Power DIP Header Connector
Pre-order
2,550,000
Factory Lead Time:15 weeks
5,100+$2.5052
- +
Ext. Price(USD):$12,776.52
MOQ:5,100
Mult:5,100
SPQ:1,700
Wire-to-Board HDR Connector 22 Pos 4.2mm Solder ST Top Entry Thru-Hole T/R
Pre-order
450,000
Factory Lead Time:15 weeks
900+$1.7148
- +
Ext. Price(USD):$1,543.32
MOQ:900
Mult:900
SPQ:300
JST
ECAD Model:
Conn Shrouded Header HDR 2 POS 2mm Solder ST Thru-Hole Box
Available Stock
20,000
Estimated Ship Time:4-6 working days
1,000+$0.0163
- +
Ext. Price(USD):$16.30
MOQ:1,000
Mult:1,000
SPQ:1,000
Pre-order
282,000
Factory Lead Time:22-26 weeks
2,820+$1.6
5,029+$1.5
10,011+$1.4
- +
Ext. Price(USD):$4,512.00
MOQ:2,820
Mult:2,820
SPQ:2,820
Pre-order
2,500,000
Factory Lead Time:11 weeks
5,000+$0.343
- +
Ext. Price(USD):$1,715.00
MOQ:5,000
Mult:5,000
SPQ:5,000
Molex
ECAD Model:
IDC Connector, F, 8 POS, 2.5mm, IDT, RA, Cable Mount, Tray
Pre-order
960,000
Factory Lead Time:22-26 weeks
9,600+$0.1163
20,000+$0.1025
50,000+$0.1
- +
Ext. Price(USD):$1,116.48
MOQ:9,600
Mult:9,600
Wire-to-Board Connector HDR 2 POS 3mm Solder RA Side Entry TH T/R
Pre-order
1,800,000
Factory Lead Time:15 weeks
3,600+$0.343
- +
Ext. Price(USD):$1,234.80
MOQ:3,600
Mult:3,600
SPQ:1,200
Molex
ECAD Model:
Conn Shrouded Header (4 Sides) M 4 POS 2mm Solder ST Top Entry SMD Tube
Pre-order
672,000
Factory Lead Time:22-26 weeks
6,720+$0.825
- +
Ext. Price(USD):$5,544.00
MOQ:6,720
Mult:6,720
SPQ:6,720
Molex
ECAD Model:
Pre-order
2,400,000
Factory Lead Time:25-42 weeks
24,000+$1.0876
- +
Ext. Price(USD):$26,102.40
MOQ:24,000
Mult:2,400
SPQ:2,400
multicomp
ECAD Model:
TERMINAL BLOCK, HEADER, 10POS, TH; Gender:Header; Pitch Spacing:5mm; No. of Positions:10Ways; Rated Current:16A; Rated Voltage:300V; Block Orientation:Through Hole Vertical; Product Range:-; SVHC:No SVHC (15-Jan-2019); C
Available Stock
516
Estimated Ship Time:6-12 working days
10+$1.4123
100+$1.3871
500+$1.3871
- +
Ext. Price(USD):$24.00
MOQ:17
Mult:1
25 / PageGoto