Other Card Edge Components

Results:

Other card edge components include specialized or supplementary connector products that are not grouped with standard edgeboard connectors, housings, contacts, adapters or accessories. Because products in this category can use different interface and mounting formats, begin with the manufacturer part number and datasheet, identify the actual connector type, and then compare its mating and PCB requirements.

Pass the Part Identity Checkpoint

The category name alone does not define a single connector format. Use the following identification sequence before comparing products or approving a substitute.

1
Capture the Manufacturer Part Number Record the complete part number, manufacturer and product series without removing suffixes.
2
Identify the Actual Connector Type Determine whether the part is a header, socket, card-edge connector or another specialized component.
3
Confirm the Mating Interface Establish whether the product connects to a PCB card edge, another PCB, a cable assembly or a separate connector.
4
Decode the Physical Format Compare positions, rows, pitch, orientation, mounting type and termination method.
5
Verify the Datasheet Confirm the mating drawing, recommended PCB layout, ratings, materials and compatible product series.

Use the Part Number as the Primary Identifier

Product descriptions can be shortened or normalized across distributor databases. The complete manufacturer part number provides the most reliable route to the original drawing and product specification.

Manufacturer + Base Part Number + Prefix and Suffix + Series

Prefixes and suffixes may identify contact finish, packaging, mounting variation, keying or another configuration detail. Compare the complete ordering code when evaluating replacements.

Determine What the Part Connects

Establish the connection path before interpreting positions, pitch or mounting details. Products in this category may serve different interconnection functions.

PCB ↔ PCB
Board connection Confirm the interface on both boards, installed spacing and mating orientation.
PCB ↔ Cable
Wire connection Identify the mating housing, contact system, wire range and termination method.
Card ↔ Host
Card-edge interface Check card thickness, conductive-finger arrangement, insertion geometry and keying.

Decode the Connector Format

Once the product type and mating interface are known, translate the mechanical specification into a comparable set of fields.

Connector type Header, socket, receptacle, card-edge connector or another specified component.
Positions and rows Confirm the total number of electrical positions and how they are distributed across rows.
Pitch Match the center-to-center spacing of contacts or terminals to the mating product and PCB.
Orientation Check straight, vertical, right-angle, top-entry or side-entry configuration as applicable.
Mounting and termination Verify surface mount or through-hole installation and the specified solder or contact termination.

Match the PCB Installation

The connector body may fit the available space while its terminals or recommended footprint remain incompatible with the board. Check the complete installation drawing.

PCB footprint Compare pad or hole locations, terminal pattern, tolerances and keep-out areas.
Installed envelope Check connector height, body width, card approach and surrounding component clearance.
Assembly process Confirm soldering method, mounting hardware, packaging and automated assembly requirements.

Confirm the Mating Component

A compatible pitch and position count do not establish a complete mating match. Use the manufacturer’s drawing or related-products list to verify the opposing connector, housing, contact or PCB interface.

✓ Mating manufacturer part number ✓ Compatible product series ✓ Contact gender and arrangement ✓ Keying and polarization ✓ Engagement and insertion depth ✓ Electrical and temperature ratings

Build a Verifiable Part Identity

Save the identifying and mating information together so that purchasing, engineering and incoming inspection use the same product definition.

Part identity record
Manufacturer + Part number | Connector type | Mating product | Positions × pitch | Mounting

If the required product is already identifiable as a complete edgeboard connector, housing, contact, adapter or accessory, browse Card Edge Connectors & Components to select the corresponding product group.

Read More
Other Card Edge ComponentsResults:
Comprehensive
Price Priority
Stock Priority
Image
Part Number
Description
Availability
Unit Price(USD)
Quantity
Operation
JST
ECAD Model:
Conn Shrouded Header (3 Sides) HDR 7 POS 2mm Solder ST Thru-Hole Box
Available Stock
20
Estimated Ship Time:6-7 working days
20+$0.4624
- +
Ext. Price(USD):$9.24
MOQ:20
Mult:20
Amphenol
Package:SMD,P=0.8mm
ECAD Model:
0.8MM B TO B REC ASSY
Pre-order
600,000
Factory Lead Time:6 weeks
1,200+$2.2824
- +
Ext. Price(USD):$2,738.88
MOQ:1,200
Mult:400
SPQ:400
Conn HDR & Receptacle IDC Connector F 17 POS 3.96mm IDT RA Cable Mount T/R
Pre-order
40,000
Factory Lead Time:22-26 weeks
400+$2.8125
800+$2.6625
1,000+$2.35
25,000+$2.075
50,000+$1.825
- +
Ext. Price(USD):$1,125.00
MOQ:400
Mult:400
SPQ:400
Wire-to-Board Connector Header 8-Pin 3mm Pitch Solder Straight Top Entry TH Tray
Pre-order
1,687,500
Factory Lead Time:15 weeks
3,375+$1.0881
- +
Ext. Price(USD):$3,672.33
MOQ:3,375
Mult:3,375
SPQ:1,125
Flex Connector, 0.50mm Pitch, 4.85mm H, Vertical ZIF Autolock, 36-Pos
Pre-order
4,200,000
Factory Lead Time:10 weeks
8,400+$2.2702
- +
Ext. Price(USD):$19,069.68
MOQ:8,400
Mult:8,400
SPQ:8,400
Wire-to-Board HDR 2 POS 4.2mm Solder RA Side Entry TH
Pre-order
3,105,000
Factory Lead Time:15 weeks
6,210+$0.8096
- +
Ext. Price(USD):$5,027.61
MOQ:6,210
Mult:2,070
SPQ:2,070
Conn Shrouded Header (4 Sides) HDR 5 POS 2mm Solder ST Top Entry Thru-Hole
Available Stock
13,995
Estimated Ship Time:6-7 working days
21+
20+$0.0527
1,000+$0.0186
- +
Ext. Price(USD):$1.05
MOQ:20
Mult:20
Wire-to-Board HDR 20 Pos 3mm Solder Straight Top Entry TH Tray
Pre-order
742,500
Factory Lead Time:15 weeks
1,485+$2.2876
- +
Ext. Price(USD):$3,397.08
MOQ:1,485
Mult:1,485
SPQ:495
16-Pin, 2mm Connector Header
Pre-order
90,000
Factory Lead Time:22-26 weeks
900+$2.0375
1,800+$1.825
5,400+$1.7125
10,350+$1.6
- +
Ext. Price(USD):$1,833.75
MOQ:900
Mult:900
SPQ:900
Wire-to-Board Connector, 2.0mm Pitch
Available Stock
300
Estimated Ship Time:14-17 working days
100+$0.411
300+$0.3548
4,000+$0.2808
5,000+$0.2808
- +
Ext. Price(USD):$50.14
MOQ:122
Mult:1
SPQ:1
Conn Unshrouded Header M 30 POS 2.54mm Solder ST Thru-Hole
Available Stock
106
Estimated Ship Time:14-17 working days
5+$6.5609
10+$5.6581
100+$4.3139
200+$4.2737
- +
Ext. Price(USD):$52.48
MOQ:8
Mult:1
SPQ:1
HEADER, PIN, 2.54MM, 40WAY; Pitch Spacing:2.54mm; No. of Contacts:40Contacts; Gender:Plug; Product Range:SL Series; Contact Termination Type:Surface Mount; No. of Rows:2Rows; Contact Plating:Tin Plated Contacts; Contact
Available Stock
144
Estimated Ship Time:6-12 working days
10+$1.6296
100+$1.6005
250+$1.6005
500+$1.5714
1,000+$1.5714
- +
Ext. Price(USD):$24.44
MOQ:15
Mult:1
High Power DIP Header Connector
Pre-order
4,050,000
Factory Lead Time:15 weeks
8,100+$1.5842
- +
Ext. Price(USD):$12,832.02
MOQ:8,100
Mult:8,100
SPQ:2,700
Pre-order
2,500
Factory Lead Time:22-26 weeks
25+$6
50+$5.05
100+$4.2375
500+$3.1625
1,000+$2.4125
- +
Ext. Price(USD):$150.00
MOQ:25
Mult:25
SPQ:25
CamdenBoss
ECAD Model:
Shrouded Header Connector, 2 Pos, 7.5mm Pitch, Solder, ST, Top Entry, TH
Available Stock
323
Estimated Ship Time:6-12 working days
10+$0.4863
100+$0.4357
2,500+$0.4201
5,000+$0.4201
- +
Ext. Price(USD):$24.31
MOQ:50
Mult:10
Wire-to-Board HDR 12 Pos 3mm Pitch Solder RA Side Entry TH T/R
Pre-order
1,200,000
Factory Lead Time:15 weeks
2,400+$0.7381
- +
Ext. Price(USD):$1,771.44
MOQ:2,400
Mult:2,400
SPQ:800
Molex
ECAD Model:
Ten60 Power R/A Plug ASSY G-2Dc-40S-G
Pre-order
45,000
Factory Lead Time:22-26 weeks
450+$10.0125
1,200+$8.775
3,000+$8.5875
- +
Ext. Price(USD):$4,505.62
MOQ:450
Mult:450
Conn Shrouded Header HDR 3 POS 2mm Solder RA SMD T/R
Available Stock
2,377
Estimated Ship Time:5-9 working days
22+
5+$0.6194
15+$0.4885
30+$0.4804
- +
Ext. Price(USD):$3.09
MOQ:5
Mult:1
SPQ:1,000
Conn Socket Strip F 36 POS 2.54mm Solder ST Top Entry Thru-Hole
Available Stock
1,127
Estimated Ship Time:6-12 working days
1+$3.2495
10+$2.9116
500+$2.8076
1,000+$2.8076
- +
Ext. Price(USD):$25.99
MOQ:8
Mult:1
Wire-to-Board Header 8 POS 4.2mm Solder Right Angle Side Entry Thru-Hole T/R
Pre-order
675,000
Factory Lead Time:15 weeks
1,350+$2.9057
- +
Ext. Price(USD):$3,922.69
MOQ:1,350
Mult:1,350
SPQ:450
JST
ECAD Model:
Conn IDC Connector RCP 2 POS 3.96mm Pitch
Pre-order
100,000
Factory Lead Time:18-22 weeks
26+
10,000+$0.2019
30,000+$0.1986
50,000+$0.1935
- +
Ext. Price(USD):$2,019.00
MOQ:10,000
Mult:10,000
SPQ:10,000
JST
ECAD Model:
IDC Connector F 3 POS 2mm Solder RA Thru-Hole Box
Available Stock
2,000
Estimated Ship Time:14-17 working days
100+$0.3836
300+$0.3274
4,000+$0.2574
5,000+$0.2574
- +
Ext. Price(USD):$50.25
MOQ:131
Mult:1
SPQ:1
Conn Board Stacker HDR 30 2.54mm Solder Straight TH Poly Bag
Pre-order
10,000
Factory Lead Time:10-16 weeks
24+
1,000+$2.2467
1,050+$2.1881
- +
Ext. Price(USD):$2,246.70
MOQ:1,000
Mult:50
SPQ:50
Wire-to-Board HDR 18 Pos 4.2mm Solder ST Top Entry TH
Pre-order
540,000
Factory Lead Time:15 weeks
1,080+$6.5442
- +
Ext. Price(USD):$7,067.73
MOQ:1,080
Mult:1,080
SPQ:360
Molex
ECAD Model:
Pre-order
264,000
Factory Lead Time:22-26 weeks
2,640+$0.825
5,280+$0.7875
- +
Ext. Price(USD):$2,178.00
MOQ:2,640
Mult:2,640
SPQ:2,640
25 / PageGoto